aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot
diff options
context:
space:
mode:
authorJayantajit Gogoi <jayanta.gogoi525@gmail.com>2020-10-12 18:51:34 +0000
committerHauke Mehrtens <hauke@hauke-m.de>2020-10-18 15:46:42 +0200
commite6d9f6fdffc6730cfa2019788afa411828eac816 (patch)
treef3b4127aee433b0373d1490e7a96f121186fe5a2 /package/boot
parent4ff7bdfeebd4c974b74df74f779fc10891898f5d (diff)
downloadupstream-e6d9f6fdffc6730cfa2019788afa411828eac816.tar.gz
upstream-e6d9f6fdffc6730cfa2019788afa411828eac816.tar.bz2
upstream-e6d9f6fdffc6730cfa2019788afa411828eac816.zip
sunxi: add support for FriendlyARM NanoPi R1
Specification: - CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz - DDR3 RAM: 512MB/1GB - Network: 10/100/1000M Ethernet x 1, 10/100M Ethernet x 1 - WiFi: 802.11b/g/n, with SMA antenna interface - USB Host: Type-A x2 - MicroSD Slot x 1 - MicroUSB: for OTG and power input - Debug Serial Port: 3Pin 2.54mm pitch pin-header - LED: nanopi:red:status nanopi:green:wan nanopi:green:lan - KEY: reset - Power Supply: DC 5V/2A Installation: - Write the image to SD Card with dd - Boot NanoPi from the SD Card Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
Diffstat (limited to 'package/boot')
-rw-r--r--package/boot/uboot-sunxi/Makefile7
-rw-r--r--package/boot/uboot-sunxi/patches/252-sunxi-h3-add-support-for-nanopi-r1.patch198
2 files changed, 205 insertions, 0 deletions
diff --git a/package/boot/uboot-sunxi/Makefile b/package/boot/uboot-sunxi/Makefile
index 4363445114..abdb263774 100644
--- a/package/boot/uboot-sunxi/Makefile
+++ b/package/boot/uboot-sunxi/Makefile
@@ -172,6 +172,12 @@ define U-Boot/nanopi_neo
BUILD_DEVICES:=friendlyarm_nanopi-neo
endef
+define U-Boot/nanopi_r1
+ BUILD_SUBTARGET:=cortexa7
+ NAME:=U-Boot for NanoPi R1 (H3)
+ BUILD_DEVICES:=friendlyarm_nanopi-r1
+endef
+
define U-Boot/orangepi_r1
BUILD_SUBTARGET:=cortexa7
NAME:=Orange Pi R1 (H2+)
@@ -310,6 +316,7 @@ UBOOT_TARGETS := \
nanopi_neo_air \
nanopi_neo_plus2 \
nanopi_neo2 \
+ nanopi_r1 \
orangepi_zero \
orangepi_r1 \
orangepi_one \
diff --git a/package/boot/uboot-sunxi/patches/252-sunxi-h3-add-support-for-nanopi-r1.patch b/package/boot/uboot-sunxi/patches/252-sunxi-h3-add-support-for-nanopi-r1.patch
new file mode 100644
index 0000000000..0db7be5421
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/252-sunxi-h3-add-support-for-nanopi-r1.patch
@@ -0,0 +1,198 @@
+From 0e8043aff1aae95d1f7b7422b91b57d9569860d3 Mon Sep 17 00:00:00 2001
+From: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
+Date: Mon, 12 Oct 2020 18:39:53 +0000
+Subject: [PATCH] sunxi: add support for FriendlyARM NanoPi R1
+
+Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
+---
+ arch/arm/dts/Makefile | 1 +
+ arch/arm/dts/sun8i-h3-nanopi-r1.dts | 146 ++++++++++++++++++++++++++++
+ configs/nanopi_r1_defconfig | 22 +++++
+ 3 files changed, 169 insertions(+)
+ create mode 100644 arch/arm/dts/sun8i-h3-nanopi-r1.dts
+ create mode 100644 configs/nanopi_r1_defconfig
+
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -531,6 +531,7 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \
+ sun8i-h3-nanopi-m1-plus.dtb \
+ sun8i-h3-nanopi-neo.dtb \
+ sun8i-h3-nanopi-neo-air.dtb \
++ sun8i-h3-nanopi-r1.dtb \
+ sun8i-h3-orangepi-2.dtb \
+ sun8i-h3-orangepi-lite.dtb \
+ sun8i-h3-orangepi-one.dtb \
+--- /dev/null
++++ b/arch/arm/dts/sun8i-h3-nanopi-r1.dts
+@@ -0,0 +1,146 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
++ * Copyright (C) 2020 Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
++ */
++
++/* NanoPi R1 is based on the NanoPi-H3 design from FriendlyARM */
++#include "sun8i-h3-nanopi.dtsi"
++
++/ {
++ model = "FriendlyARM NanoPi R1";
++ compatible = "friendlyarm,nanopi-r1", "allwinner,sun8i-h3";
++
++ reg_gmac_3v3: gmac-3v3 {
++ compatible = "regulator-fixed";
++ regulator-name = "gmac-3v3";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ startup-delay-us = <100000>;
++ enable-active-high;
++ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
++ };
++
++ vdd_cpux: gpio-regulator {
++ compatible = "regulator-gpio";
++ pinctrl-names = "default";
++ regulator-name = "vdd-cpux";
++ regulator-type = "voltage";
++ regulator-boot-on;
++ regulator-always-on;
++ regulator-min-microvolt = <1100000>;
++ regulator-max-microvolt = <1300000>;
++ regulator-ramp-delay = <50>;
++ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
++ gpios-states = <0x1>;
++ states = <1100000 0x0
++ 1300000 0x1>;
++ };
++
++ wifi_pwrseq: wifi_pwrseq {
++ compatible = "mmc-pwrseq-simple";
++ pinctrl-names = "default";
++ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
++ };
++
++ leds {
++ /delete-node/ pwr;
++ status {
++ label = "nanopi:red:status";
++ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "heartbeat";
++ };
++
++ wan {
++ label = "nanopi:green:wan";
++ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
++ };
++
++ lan {
++ label = "nanopi:green:lan";
++ gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
++ r_gpio_keys {
++ pinctrl-names = "default";
++ pinctrl-0 = <&sw_r_npi>;
++
++ /delete-node/ k1;
++ reset {
++ label = "reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++&cpu0 {
++ cpu-supply = <&vdd_cpux>;
++};
++
++&ehci1 {
++ status = "okay";
++};
++
++&ehci2 {
++ status = "okay";
++};
++
++&emac {
++ pinctrl-names = "default";
++ pinctrl-0 = <&emac_rgmii_pins>;
++ phy-supply = <&reg_gmac_3v3>;
++ phy-handle = <&ext_rgmii_phy>;
++ phy-mode = "rgmii";
++ status = "okay";
++};
++
++&external_mdio {
++ ext_rgmii_phy: ethernet-phy@1 {
++ compatible = "ethernet-phy-ieee802.3-c22";
++ reg = <7>;
++ };
++};
++
++&mmc1 {
++ vmmc-supply = <&reg_vcc3v3>;
++ vqmmc-supply = <&reg_vcc3v3>;
++ mmc-pwrseq = <&wifi_pwrseq>;
++ bus-width = <4>;
++ non-removable;
++ status = "okay";
++
++ sdio_wifi: sdio_wifi@1 {
++ reg = <1>;
++ compatible = "brcm,bcm4329-fmac";
++ interrupt-parent = <&pio>;
++ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>;
++ interrupt-names = "host-wake";
++ };
++};
++
++&mmc2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc2_8bit_pins>;
++ vmmc-supply = <&reg_vcc3v3>;
++ vqmmc-supply = <&reg_vcc3v3>;
++ bus-width = <8>;
++ non-removable;
++ status = "okay";
++};
++
++&ohci1 {
++ status = "okay";
++};
++
++&ohci2 {
++ status = "okay";
++};
++
++&r_pio {
++ sw_r_npi: key_pins {
++ pins = "PL3";
++ function = "gpio_in";
++ };
++};
+--- /dev/null
++++ b/configs/nanopi_r1_defconfig
+@@ -0,0 +1,22 @@
++CONFIG_ARM=y
++CONFIG_ARCH_SUNXI=y
++CONFIG_SPL=y
++CONFIG_MACH_SUN8I_H3=y
++CONFIG_DRAM_CLK=408
++CONFIG_DRAM_ZQ=3881979
++CONFIG_DRAM_ODT_EN=y
++CONFIG_MACPWR="PD6"
++# CONFIG_VIDEO_DE2 is not set
++CONFIG_NR_DRAM_BANKS=1
++# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
++CONFIG_CONSOLE_MUX=y
++CONFIG_SYS_CLK_FREQ=480000000
++# CONFIG_CMD_FLASH is not set
++# CONFIG_SPL_DOS_PARTITION is not set
++# CONFIG_SPL_EFI_PARTITION is not set
++CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-r1"
++CONFIG_SUN8I_EMAC=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_OHCI_HCD=y
++CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
++CONFIG_MMC_SUNXI_SLOT_EXTRA=2