aboutsummaryrefslogtreecommitdiffstats
path: root/package/broadcom-57xx/Makefile
diff options
context:
space:
mode:
authorFelix Fietkau <nbd@openwrt.org>2008-06-15 11:11:28 +0000
committerFelix Fietkau <nbd@openwrt.org>2008-06-15 11:11:28 +0000
commitddd809f9e56e3a30d459d6189a1582808d204821 (patch)
tree42452684184365d849557d88c0a7155f32287ad3 /package/broadcom-57xx/Makefile
parent20937ce81a7807fb3506728edaaff731cee7e18c (diff)
downloadupstream-ddd809f9e56e3a30d459d6189a1582808d204821.tar.gz
upstream-ddd809f9e56e3a30d459d6189a1582808d204821.tar.bz2
upstream-ddd809f9e56e3a30d459d6189a1582808d204821.zip
(6/6) bcm57xx: package
This is the bcm57xx package. I have tested default vlan functions, but I dont have the equipment to test more advanced setups. The default vlan setup seems to be working fine. I also added the activate_gpio parameter which will make the driver activate the switch via gpio before probing for it. I'm not sure which method is best for autoload. For the wrt350n, I need the activate_gpio parameter. But its probably not a good idea to add that to the autoload file. On a system without a bcm57xx switch, isn't it a bad idea to mess with the gpios looking for the switch? Ideally, wouldn't it be best to load the bcm57xx module from broadcom-diag, after it has determined which router its on? I tried using 'request_module' from there, but had no success. For now, I am relying on preinit to load the bcm57xx module with activate_gpio param, after it has failed to load switch_robo and switch_adm. Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu> SVN-Revision: 11471
Diffstat (limited to 'package/broadcom-57xx/Makefile')
-rw-r--r--package/broadcom-57xx/Makefile51
1 files changed, 51 insertions, 0 deletions
diff --git a/package/broadcom-57xx/Makefile b/package/broadcom-57xx/Makefile
new file mode 100644
index 0000000000..172074ca35
--- /dev/null
+++ b/package/broadcom-57xx/Makefile
@@ -0,0 +1,51 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+# $Id: Makefile 8694 2007-09-08 19:55:42Z nbd $
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=broadcom-57xx
+PKG_RELEASE:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/brcm-57xx
+ SUBMENU:=Network Devices
+ DEPENDS:=@TARGET_brcm_2_4 +kmod-switch
+ TITLE:=Broadcom 57xx ethernet support
+ FILES:=$(PKG_BUILD_DIR)/bcm57xx.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,30,bcm57xx)
+endef
+
+define Build/Prepare
+ mkdir -p $(PKG_BUILD_DIR)
+ $(CP) ./src/* $(PKG_BUILD_DIR)/
+endef
+
+ifeq ($(BOARD),brcm-2.4)
+ BUILDFLAGS = -DBCMDRIVER -I$(LINUX_DIR)/arch/mips/bcm947xx/include -I$(STAGING_DIR)/usr/include
+ BUILDFLAGS += -DDBG=0 -DBCM_PROC_FS=1 -DT3_JUMBO_RCV_RCB_ENTRY_COUNT=256 -DNICE_SUPPORT
+ BUILDFLAGS += -DPCIX_TARGET_WORKAROUND=1 -DINCLUDE_TBI_SUPPORT=1 -DINCLUDE_5701_AX_FIX=1
+endif
+
+define Build/Compile
+ $(MAKE) -C "$(LINUX_DIR)" \
+ CROSS_COMPILE="$(TARGET_CROSS)" \
+ ARCH="$(LINUX_KARCH)" \
+ SUBDIRS="$(PKG_BUILD_DIR)" \
+ EXTRA_CFLAGS="$(BUILDFLAGS)" \
+ modules
+endef
+
+define KernelPackage/brcm-57xx/install
+ $(call Package/brcm-57xx/install/Default,$(1))
+ #$(INSTALL_DIR) $(1)/etc/modules.d
+ #echo "bcm57xx activate_gpio=1" > $(1)/etc/modules.d/30-bcm57xx
+endef
+
+$(eval $(call KernelPackage,brcm-57xx))