mac80211: Use backports-4.19-rc5-1.tar.xz

This is an official release with some minor changes compared to the
unofficial 4.19-rc4-1 we used before.
* added bcma and ssb again, which is removed in OpenWrt
* fix to build with kernel 4.19
* other minor fixes not relevant for Openwrt.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 335 insertions, 0 deletions

diff --git a/package/kernel/mac80211/patches/build/060-no_local_ssb_bcma.patch b/package/kernel/mac80211/patches/build/060-no_local_ssb_bcma.patch
new file mode 100644
index 0000000000..06636060f7
--- /dev/null
+++ b/package/kernel/mac80211/patches/build/060-no_local_ssb_bcma.patch
@@ -0,0 +1,335 @@
+--- a/local-symbols
++++ b/local-symbols
+@@ -396,43 +396,6 @@ USB_IPHETH=
+ USB_SIERRA_NET=
+ USB_VL600=
+ USB_NET_CH9200=
+-SSB_POSSIBLE=
+-SSB=
+-SSB_SPROM=
+-SSB_BLOCKIO=
+-SSB_PCIHOST_POSSIBLE=
+-SSB_PCIHOST=
+-SSB_B43_PCI_BRIDGE=
+-SSB_PCMCIAHOST_POSSIBLE=
+-SSB_PCMCIAHOST=
+-SSB_SDIOHOST_POSSIBLE=
+-SSB_SDIOHOST=
+-SSB_HOST_SOC=
+-SSB_SERIAL=
+-SSB_DRIVER_PCICORE_POSSIBLE=
+-SSB_DRIVER_PCICORE=
+-SSB_PCICORE_HOSTMODE=
+-SSB_DRIVER_MIPS=
+-SSB_SFLASH=
+-SSB_EMBEDDED=
+-SSB_DRIVER_EXTIF=
+-SSB_DRIVER_GIGE=
+-SSB_DRIVER_GPIO=
+-BCMA_POSSIBLE=
+-BCMA=
+-BCMA_BLOCKIO=
+-BCMA_HOST_PCI_POSSIBLE=
+-BCMA_HOST_PCI=
+-BCMA_HOST_SOC=
+-BCMA_DRIVER_PCI=
+-BCMA_DRIVER_PCI_HOSTMODE=
+-BCMA_DRIVER_MIPS=
+-BCMA_PFLASH=
+-BCMA_SFLASH=
+-BCMA_NFLASH=
+-BCMA_DRIVER_GMAC_CMN=
+-BCMA_DRIVER_GPIO=
+-BCMA_DEBUG=
+ USB_ACM=
+ USB_PRINTER=
+ USB_WDM=
+--- a/drivers/net/wireless/broadcom/b43/Kconfig
++++ b/drivers/net/wireless/broadcom/b43/Kconfig
+@@ -61,21 +61,21 @@ endchoice
+ config B43_PCI_AUTOSELECT
+ 	bool
+ 	depends on B43 && SSB_PCIHOST_POSSIBLE
+-	select SSB_PCIHOST
+-	select SSB_B43_PCI_BRIDGE
++	depends on SSB_PCIHOST
++	depends on SSB_B43_PCI_BRIDGE
+ 	default y
+ 
+ # Auto-select SSB PCICORE driver, if possible
+ config B43_PCICORE_AUTOSELECT
+ 	bool
+ 	depends on B43 && SSB_DRIVER_PCICORE_POSSIBLE
+-	select SSB_DRIVER_PCICORE
++	depends on SSB_DRIVER_PCICORE
+ 	default y
+ 
+ config B43_SDIO
+ 	bool "Broadcom 43xx SDIO device support"
+ 	depends on B43 && B43_SSB && SSB_SDIOHOST_POSSIBLE
+-	select SSB_SDIOHOST
++	depends on SSB_SDIOHOST
+ 	---help---
+ 	  Broadcom 43xx device support for Soft-MAC SDIO devices.
+ 
+@@ -94,13 +94,13 @@ config B43_SDIO
+ config B43_BCMA_PIO
+ 	bool
+ 	depends on B43 && B43_BCMA
+-	select BCMA_BLOCKIO
++	depends on BCMA_BLOCKIO
+ 	default y
+ 
+ config B43_PIO
+ 	bool
+ 	depends on B43 && B43_SSB
+-	select SSB_BLOCKIO
++	depends on SSB_BLOCKIO
+ 	default y
+ 
+ config B43_PHY_G
+--- a/drivers/net/wireless/broadcom/b43/main.c
++++ b/drivers/net/wireless/broadcom/b43/main.c
+@@ -2876,7 +2876,7 @@ static struct ssb_device *b43_ssb_gpio_d
+ {
+ 	struct ssb_bus *bus = dev->dev->sdev->bus;
+ 
+-#ifdef CPTCFG_SSB_DRIVER_PCICORE
++#ifdef CONFIG_SSB_DRIVER_PCICORE
+ 	return (bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev);
+ #else
+ 	return bus->chipco.dev;
+@@ -4893,7 +4893,7 @@ static int b43_wireless_core_init(struct
+ 	}
+ 	if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)
+ 		hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */
+-#if defined(CPTCFG_B43_SSB) && defined(CPTCFG_SSB_DRIVER_PCICORE)
++#if defined(CPTCFG_B43_SSB) && defined(CONFIG_SSB_DRIVER_PCICORE)
+ 	if (dev->dev->bus_type == B43_BUS_SSB &&
+ 	    dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI &&
+ 	    dev->dev->sdev->bus->pcicore.dev->id.revision <= 10)
+--- a/drivers/net/wireless/broadcom/b43legacy/Kconfig
++++ b/drivers/net/wireless/broadcom/b43legacy/Kconfig
+@@ -2,7 +2,7 @@ config B43LEGACY
+ 	tristate "Broadcom 43xx-legacy wireless support (mac80211 stack)"
+ 	depends on m
+ 	depends on SSB_POSSIBLE && MAC80211 && HAS_DMA
+-	select SSB
++	depends on SSB
+ 	depends on FW_LOADER
+ 	---help---
+ 	  b43legacy is a driver for 802.11b devices from Broadcom (BCM4301 and
+@@ -24,15 +24,15 @@ config B43LEGACY
+ config B43LEGACY_PCI_AUTOSELECT
+ 	bool
+ 	depends on B43LEGACY && SSB_PCIHOST_POSSIBLE
+-	select SSB_PCIHOST
+-	select SSB_B43_PCI_BRIDGE
++	depends on SSB_PCIHOST
++	depends on SSB_B43_PCI_BRIDGE
+ 	default y
+ 
+ # Auto-select SSB PCICORE driver, if possible
+ config B43LEGACY_PCICORE_AUTOSELECT
+ 	bool
+ 	depends on B43LEGACY && SSB_DRIVER_PCICORE_POSSIBLE
+-	select SSB_DRIVER_PCICORE
++	depends on SSB_DRIVER_PCICORE
+ 	default y
+ 
+ # LED support
+--- a/drivers/net/wireless/broadcom/b43legacy/main.c
++++ b/drivers/net/wireless/broadcom/b43legacy/main.c
+@@ -1937,7 +1937,7 @@ static int b43legacy_gpio_init(struct b4
+ 	if (dev->dev->id.revision >= 2)
+ 		mask  |= 0x0010; /* FIXME: This is redundant. */
+ 
+-#ifdef CPTCFG_SSB_DRIVER_PCICORE
++#ifdef CONFIG_SSB_DRIVER_PCICORE
+ 	pcidev = bus->pcicore.dev;
+ #endif
+ 	gpiodev = bus->chipco.dev ? : pcidev;
+@@ -1956,7 +1956,7 @@ static void b43legacy_gpio_cleanup(struc
+ 	struct ssb_bus *bus = dev->dev->bus;
+ 	struct ssb_device *gpiodev, *pcidev = NULL;
+ 
+-#ifdef CPTCFG_SSB_DRIVER_PCICORE
++#ifdef CONFIG_SSB_DRIVER_PCICORE
+ 	pcidev = bus->pcicore.dev;
+ #endif
+ 	gpiodev = bus->chipco.dev ? : pcidev;
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.h
+@@ -22,7 +22,7 @@ struct brcms_led {
+ 	bool active_low;
+ };
+ 
+-#ifdef CPTCFG_BCMA_DRIVER_GPIO
++#ifdef CONFIG_BCMA_DRIVER_GPIO
+ void brcms_led_unregister(struct brcms_info *wl);
+ int brcms_led_register(struct brcms_info *wl);
+ #else
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/Makefile
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/Makefile
+@@ -42,6 +42,6 @@ brcmsmac-y := \
+ 	brcms_trace_events.o \
+ 	debug.o
+ 
+-brcmsmac-$(CPTCFG_BCMA_DRIVER_GPIO) += led.o
++brcmsmac-$(CONFIG_BCMA_DRIVER_GPIO) += led.o
+ 
+ obj-$(CPTCFG_BRCMSMAC)	+= brcmsmac.o
+--- a/drivers/net/wireless/broadcom/brcm80211/Kconfig
++++ b/drivers/net/wireless/broadcom/brcm80211/Kconfig
+@@ -7,7 +7,7 @@ config BRCMSMAC
+ 	depends on m
+ 	depends on MAC80211
+ 	depends on BCMA_POSSIBLE
+-	select BCMA
++	depends on BCMA
+ 	select NEW_LEDS if BCMA_DRIVER_GPIO
+ 	select LEDS_CLASS if BCMA_DRIVER_GPIO
+ 	select BRCMUTIL
+--- a/Kconfig.local
++++ b/Kconfig.local
+@@ -1192,117 +1192,6 @@ config BACKPORTED_USB_VL600
+ config BACKPORTED_USB_NET_CH9200
+ 	tristate
+ 	default USB_NET_CH9200
+-config BACKPORTED_SSB_POSSIBLE
+-	tristate
+-	default SSB_POSSIBLE
+-config BACKPORTED_SSB
+-	tristate
+-	default SSB
+-config BACKPORTED_SSB_SPROM
+-	tristate
+-	default SSB_SPROM
+-config BACKPORTED_SSB_BLOCKIO
+-	tristate
+-	default SSB_BLOCKIO
+-config BACKPORTED_SSB_PCIHOST_POSSIBLE
+-	tristate
+-	default SSB_PCIHOST_POSSIBLE
+-config BACKPORTED_SSB_PCIHOST
+-	tristate
+-	default SSB_PCIHOST
+-config BACKPORTED_SSB_B43_PCI_BRIDGE
+-	tristate
+-	default SSB_B43_PCI_BRIDGE
+-config BACKPORTED_SSB_PCMCIAHOST_POSSIBLE
+-	tristate
+-	default SSB_PCMCIAHOST_POSSIBLE
+-config BACKPORTED_SSB_PCMCIAHOST
+-	tristate
+-	default SSB_PCMCIAHOST
+-config BACKPORTED_SSB_SDIOHOST_POSSIBLE
+-	tristate
+-	default SSB_SDIOHOST_POSSIBLE
+-config BACKPORTED_SSB_SDIOHOST
+-	tristate
+-	default SSB_SDIOHOST
+-config BACKPORTED_SSB_HOST_SOC
+-	tristate
+-	default SSB_HOST_SOC
+-config BACKPORTED_SSB_SERIAL
+-	tristate
+-	default SSB_SERIAL
+-config BACKPORTED_SSB_DRIVER_PCICORE_POSSIBLE
+-	tristate
+-	default SSB_DRIVER_PCICORE_POSSIBLE
+-config BACKPORTED_SSB_DRIVER_PCICORE
+-	tristate
+-	default SSB_DRIVER_PCICORE
+-config BACKPORTED_SSB_PCICORE_HOSTMODE
+-	tristate
+-	default SSB_PCICORE_HOSTMODE
+-config BACKPORTED_SSB_DRIVER_MIPS
+-	tristate
+-	default SSB_DRIVER_MIPS
+-config BACKPORTED_SSB_SFLASH
+-	tristate
+-	default SSB_SFLASH
+-config BACKPORTED_SSB_EMBEDDED
+-	tristate
+-	default SSB_EMBEDDED
+-config BACKPORTED_SSB_DRIVER_EXTIF
+-	tristate
+-	default SSB_DRIVER_EXTIF
+-config BACKPORTED_SSB_DRIVER_GIGE
+-	tristate
+-	default SSB_DRIVER_GIGE
+-config BACKPORTED_SSB_DRIVER_GPIO
+-	tristate
+-	default SSB_DRIVER_GPIO
+-config BACKPORTED_BCMA_POSSIBLE
+-	tristate
+-	default BCMA_POSSIBLE
+-config BACKPORTED_BCMA
+-	tristate
+-	default BCMA
+-config BACKPORTED_BCMA_BLOCKIO
+-	tristate
+-	default BCMA_BLOCKIO
+-config BACKPORTED_BCMA_HOST_PCI_POSSIBLE
+-	tristate
+-	default BCMA_HOST_PCI_POSSIBLE
+-config BACKPORTED_BCMA_HOST_PCI
+-	tristate
+-	default BCMA_HOST_PCI
+-config BACKPORTED_BCMA_HOST_SOC
+-	tristate
+-	default BCMA_HOST_SOC
+-config BACKPORTED_BCMA_DRIVER_PCI
+-	tristate
+-	default BCMA_DRIVER_PCI
+-config BACKPORTED_BCMA_DRIVER_PCI_HOSTMODE
+-	tristate
+-	default BCMA_DRIVER_PCI_HOSTMODE
+-config BACKPORTED_BCMA_DRIVER_MIPS
+-	tristate
+-	default BCMA_DRIVER_MIPS
+-config BACKPORTED_BCMA_PFLASH
+-	tristate
+-	default BCMA_PFLASH
+-config BACKPORTED_BCMA_SFLASH
+-	tristate
+-	default BCMA_SFLASH
+-config BACKPORTED_BCMA_NFLASH
+-	tristate
+-	default BCMA_NFLASH
+-config BACKPORTED_BCMA_DRIVER_GMAC_CMN
+-	tristate
+-	default BCMA_DRIVER_GMAC_CMN
+-config BACKPORTED_BCMA_DRIVER_GPIO
+-	tristate
+-	default BCMA_DRIVER_GPIO
+-config BACKPORTED_BCMA_DEBUG
+-	tristate
+-	default BCMA_DEBUG
+ config BACKPORTED_USB_ACM
+ 	tristate
+ 	default USB_ACM
+--- a/Kconfig.sources
++++ b/Kconfig.sources
+@@ -7,9 +7,6 @@ source "$BACKPORT_DIR/net/mac80211/Kconf
+ source "$BACKPORT_DIR/drivers/net/wireless/Kconfig"
+ source "$BACKPORT_DIR/drivers/net/usb/Kconfig"
+ 
+-source "$BACKPORT_DIR/drivers/ssb/Kconfig"
+-source "$BACKPORT_DIR/drivers/bcma/Kconfig"
+-
+ source "$BACKPORT_DIR/drivers/usb/class/Kconfig"
+ 
+ source "$BACKPORT_DIR/drivers/staging/Kconfig"
+--- a/Makefile.kernel
++++ b/Makefile.kernel
+@@ -40,8 +40,6 @@ obj-y += compat/
+ obj-$(CPTCFG_CFG80211) += net/wireless/
+ obj-$(CPTCFG_MAC80211) += net/mac80211/
+ obj-$(CPTCFG_WLAN) += drivers/net/wireless/
+-obj-$(CPTCFG_SSB) += drivers/ssb/
+-obj-$(CPTCFG_BCMA) += drivers/bcma/
+ obj-$(CPTCFG_USB_NET_RNDIS_WLAN) += drivers/net/usb/
+ 
+ obj-$(CPTCFG_USB_WDM) += drivers/usb/class/