diff options
author | Russell Senior <russell@personaltelco.net> | 2021-06-04 17:27:48 -0700 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2021-07-04 14:42:08 +0200 |
commit | 12eb5b2384a63427c0062856331fda60a1ebb309 (patch) | |
tree | 8bda302c39f821e56ab52ffea63bf68c49d7c681 /package/kernel/trelay/files/trelay.init | |
parent | 3c3a96df3ff51d99f608be435dfe3d25231ff845 (diff) | |
download | upstream-12eb5b2384a63427c0062856331fda60a1ebb309.tar.gz upstream-12eb5b2384a63427c0062856331fda60a1ebb309.tar.bz2 upstream-12eb5b2384a63427c0062856331fda60a1ebb309.zip |
ath79: add support for Ubiquiti PowerBeam M (XW)
This patch adds support for the Ubiquiti PowerBeam M (XW), e.g. PBE-M5-400,
a 802.11n wireless with a feed+dish form factor. This device was previously
supported by the ar71xx loco-m-xw firmware.
Specifications:
- Atheros AR9342 SoC
- 64 MB RAM
- 8 MB SPI flash
- 1x 10/100 Mbps Ethernet port, 24 Vdc PoE-in
- Power and LAN green LEDs
- 4x RSSI LEDs (red, orange, green, green)
- UART (115200 8N1)
Flashing via stock GUI:
- Downgrade to AirOS v5.5.x (latest available is 5.5.10-u2) first (see
https://openwrt.org/toh/ubiquiti/powerbeam installation instructions)
- Upload the factory image via AirOS web GUI.
Flashing via TFTP:
- Use a pointy tool (e.g., unbent paperclip) to keep the
reset button pressed.
- Power on the device (keep reset button pressed).
- Keep pressing until LEDs flash alternatively LED1+LED3 =>
LED2+LED4 => LED1+LED3, etc.
- Release reset button.
- The device starts a TFTP server at 192.168.1.20.
- Set a static IP on the computer (e.g., 192.168.1.21/24).
- Upload via tftp the factory image:
$ tftp 192.168.1.20
tftp> bin
tftp> trace
tftp> put openwrt-ath79-generic-xxxxx-ubnt_powerbeam-m-xw-squashfs-factory.bin
WARNING: so far, no non-destructive method has been discovered for
opening the enclosure to reach the serial console. Internal photos
are available here: https://fcc.io/SWX-NBM5HP
Signed-off-by: Russell Senior <russell@personaltelco.net>
Diffstat (limited to 'package/kernel/trelay/files/trelay.init')
0 files changed, 0 insertions, 0 deletions