hostapd: Update to version 2.8 (2019-04-21)

This also syncs the configuration files with the default configuration
files, but no extra options are activated or deactivated.

The mesh patches were partially merged into hostapd 2.8, the remaining
patches were extracted from patchwork and are now applied by OpenWrt.
The patches still have open questions which are not fixed by the author.
They were taken from this page:
https://patchwork.ozlabs.org/project/hostap/list/?series=62725&state=*

The changes in 007-mesh-apply-channel-attributes-before-running-Mesh.patch
where first applied to hostapd, but later reverted in hostapd commit
3e949655ccc5 because they caused memory leaks.

The size of the ipkgs increase a bit (between 1.3% and 2.3%):

old 2018-12-02 (2.7):
283337 wpad-basic_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk
252857 wpad-mini_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk
417473 wpad-openssl_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk
415105 wpad-wolfssl_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk

new 2019-04-21 (2.8):
288264 wpad-basic_2019-04-21-63962824-1_mipsel_24kc.ipk
256188 wpad-mini_2019-04-21-63962824-1_mipsel_24kc.ipk
427475 wpad-openssl_2019-04-21-63962824-1_mipsel_24kc.ipk
423071 wpad-wolfssl_2019-04-21-63962824-1_mipsel_24kc.ipk

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>

1 files changed, 18 insertions, 18 deletions

diff --git a/package/network/services/hostapd/patches/018-mesh-make-forwarding-configurable.patch b/package/network/services/hostapd/patches/018-mesh-make-forwarding-configurable.patch
index 2eb2d7de07..9584417b57 100644
--- a/package/network/services/hostapd/patches/018-mesh-make-forwarding-configurable.patch
+++ b/package/network/services/hostapd/patches/018-mesh-make-forwarding-configurable.patch
@@ -23,7 +23,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 
 --- a/src/ap/ap_config.h
 +++ b/src/ap/ap_config.h
-@@ -49,6 +49,7 @@ struct mesh_conf {
+@@ -50,6 +50,7 @@ struct mesh_conf {
  	int dot11MeshRetryTimeout; /* msec */
  	int dot11MeshConfirmTimeout; /* msec */
  	int dot11MeshHoldingTimeout; /* msec */
@@ -31,7 +31,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  };
  
  #define MAX_STA_COUNT 2007
-@@ -628,6 +629,7 @@ struct hostapd_bss_config {
+@@ -645,6 +646,7 @@ struct hostapd_bss_config {
  
  #define MESH_ENABLED BIT(0)
  	int mesh;
@@ -41,7 +41,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  
 --- a/src/drivers/driver.h
 +++ b/src/drivers/driver.h
-@@ -1375,6 +1375,7 @@ struct wpa_driver_mesh_bss_params {
+@@ -1409,6 +1409,7 @@ struct wpa_driver_mesh_bss_params {
  #define WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS	0x00000004
  #define WPA_DRIVER_MESH_CONF_FLAG_HT_OP_MODE		0x00000008
  #define WPA_DRIVER_MESH_CONF_FLAG_RSSI_THRESHOLD	0x00000010
@@ -49,7 +49,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  	/*
  	 * TODO: Other mesh configuration parameters would go here.
  	 * See NL80211_MESHCONF_* for all the mesh config parameters.
-@@ -1384,6 +1385,7 @@ struct wpa_driver_mesh_bss_params {
+@@ -1418,6 +1419,7 @@ struct wpa_driver_mesh_bss_params {
  	int peer_link_timeout;
  	int max_peer_links;
  	int rssi_threshold;
@@ -59,7 +59,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  
 --- a/src/drivers/driver_nl80211.c
 +++ b/src/drivers/driver_nl80211.c
-@@ -9332,6 +9332,9 @@ static int nl80211_put_mesh_config(struc
+@@ -9512,6 +9512,9 @@ static int nl80211_put_mesh_config(struc
  	if (((params->flags & WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS) &&
  	     nla_put_u8(msg, NL80211_MESHCONF_AUTO_OPEN_PLINKS,
  			params->auto_plinks)) ||
@@ -71,7 +71,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  			 params->max_peer_links)) ||
 --- a/wpa_supplicant/config.c
 +++ b/wpa_supplicant/config.c
-@@ -2228,6 +2228,7 @@ static const struct parse_data ssid_fiel
+@@ -2307,6 +2307,7 @@ static const struct parse_data ssid_fiel
  #ifdef CONFIG_MESH
  	{ INT_RANGE(mode, 0, 5) },
  	{ INT_RANGE(no_auto_peer, 0, 1) },
@@ -79,7 +79,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  	{ INT_RANGE(mesh_rssi_threshold, -255, 1) },
  #else /* CONFIG_MESH */
  	{ INT_RANGE(mode, 0, 4) },
-@@ -2779,6 +2780,7 @@ void wpa_config_set_network_defaults(str
+@@ -2868,6 +2869,7 @@ void wpa_config_set_network_defaults(str
  	ssid->dot11MeshRetryTimeout = DEFAULT_MESH_RETRY_TIMEOUT;
  	ssid->dot11MeshConfirmTimeout = DEFAULT_MESH_CONFIRM_TIMEOUT;
  	ssid->dot11MeshHoldingTimeout = DEFAULT_MESH_HOLDING_TIMEOUT;
@@ -87,7 +87,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  	ssid->mesh_rssi_threshold = DEFAULT_MESH_RSSI_THRESHOLD;
  #endif /* CONFIG_MESH */
  #ifdef CONFIG_HT_OVERRIDES
-@@ -3996,6 +3998,7 @@ struct wpa_config * wpa_config_alloc_emp
+@@ -4088,6 +4090,7 @@ struct wpa_config * wpa_config_alloc_emp
  	config->user_mpm = DEFAULT_USER_MPM;
  	config->max_peer_links = DEFAULT_MAX_PEER_LINKS;
  	config->mesh_max_inactivity = DEFAULT_MESH_MAX_INACTIVITY;
@@ -95,7 +95,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  	config->dot11RSNASAERetransPeriod =
  		DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD;
  	config->fast_reauth = DEFAULT_FAST_REAUTH;
-@@ -4618,6 +4621,7 @@ static const struct global_parse_data gl
+@@ -4725,6 +4728,7 @@ static const struct global_parse_data gl
  	{ INT(user_mpm), 0 },
  	{ INT_RANGE(max_peer_links, 0, 255), 0 },
  	{ INT(mesh_max_inactivity), 0 },
@@ -113,7 +113,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  /*
   * The default dot11RSNASAERetransPeriod is defined as 40 ms in the standard,
   * but use 1000 ms in practice to avoid issues on low power CPUs.
-@@ -1306,6 +1307,14 @@ struct wpa_config {
+@@ -1326,6 +1327,14 @@ struct wpa_config {
  	int mesh_max_inactivity;
  
  	/**
@@ -130,7 +130,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  	 * This timeout value is used in mesh STA to retransmit
 --- a/wpa_supplicant/config_file.c
 +++ b/wpa_supplicant/config_file.c
-@@ -818,6 +818,7 @@ static void wpa_config_write_network(FIL
+@@ -829,6 +829,7 @@ static void wpa_config_write_network(FIL
  #endif /* IEEE8021X_EAPOL */
  	INT(mode);
  	INT(no_auto_peer);
@@ -138,7 +138,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  	INT(frequency);
  	INT(fixed_freq);
  #ifdef CONFIG_ACS
-@@ -1450,6 +1451,9 @@ static void wpa_config_write_global(FILE
+@@ -1471,6 +1472,9 @@ static void wpa_config_write_global(FILE
  		fprintf(f, "mesh_max_inactivity=%d\n",
  			config->mesh_max_inactivity);
  
@@ -150,7 +150,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  		fprintf(f, "dot11RSNASAERetransPeriod=%d\n",
 --- a/wpa_supplicant/config_ssid.h
 +++ b/wpa_supplicant/config_ssid.h
-@@ -500,6 +500,11 @@ struct wpa_ssid {
+@@ -514,6 +514,11 @@ struct wpa_ssid {
  	int dot11MeshConfirmTimeout; /* msec */
  	int dot11MeshHoldingTimeout; /* msec */
  
@@ -164,7 +164,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  
 --- a/wpa_supplicant/mesh.c
 +++ b/wpa_supplicant/mesh.c
-@@ -121,6 +121,7 @@ static struct mesh_conf * mesh_config_cr
+@@ -126,6 +126,7 @@ static struct mesh_conf * mesh_config_cr
  	conf->mesh_cc_id = 0;
  	conf->mesh_sp_id = MESH_SYNC_METHOD_NEIGHBOR_OFFSET;
  	conf->mesh_auth_id = (conf->security & MESH_CONF_SEC_AUTH) ? 1 : 0;
@@ -172,7 +172,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  	conf->dot11MeshMaxRetries = ssid->dot11MeshMaxRetries;
  	conf->dot11MeshRetryTimeout = ssid->dot11MeshRetryTimeout;
  	conf->dot11MeshConfirmTimeout = ssid->dot11MeshConfirmTimeout;
-@@ -256,6 +257,7 @@ static int wpa_supplicant_mesh_init(stru
+@@ -325,6 +326,7 @@ static int wpa_supplicant_mesh_init(stru
  	bss->conf->start_disabled = 1;
  	bss->conf->mesh = MESH_ENABLED;
  	bss->conf->ap_max_inactivity = wpa_s->conf->mesh_max_inactivity;
@@ -180,7 +180,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  
  	if (ieee80211_is_dfs(ssid->frequency, wpa_s->hw.modes,
  			     wpa_s->hw.num_modes) && wpa_s->conf->country[0]) {
-@@ -534,6 +536,10 @@ int wpa_supplicant_join_mesh(struct wpa_
+@@ -543,6 +545,10 @@ int wpa_supplicant_join_mesh(struct wpa_
  	}
  	params->conf.peer_link_timeout = wpa_s->conf->mesh_max_inactivity;
  
@@ -188,12 +188,12 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 +	params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_FORWARDING;
 +	params->conf.forwarding = ssid->mesh_fwding;
 +
+ 	os_free(wpa_s->mesh_params);
  	wpa_s->mesh_params = params;
  	if (wpa_supplicant_mesh_init(wpa_s, ssid, &params->freq)) {
- 		wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh");
 --- a/wpa_supplicant/mesh_mpm.c
 +++ b/wpa_supplicant/mesh_mpm.c
-@@ -289,9 +289,9 @@ static void mesh_mpm_send_plink_action(s
+@@ -295,9 +295,9 @@ static void mesh_mpm_send_plink_action(s
  		info = (bss->num_plinks > 63 ? 63 : bss->num_plinks) << 1;
  		/* TODO: Add Connected to Mesh Gate/AS subfields */
  		wpabuf_put_u8(buf, info);