hostapd: update to version 2021-05-21

Signed-off-by: Felix Fietkau <nbd@nbd.name>

1 files changed, 0 insertions, 219 deletions

diff --git a/package/network/services/hostapd/patches/050-mesh-make-forwarding-configurable.patch b/package/network/services/hostapd/patches/050-mesh-make-forwarding-configurable.patch
deleted file mode 100644
index 0ecb9ba078..0000000000
--- a/package/network/services/hostapd/patches/050-mesh-make-forwarding-configurable.patch
+++ /dev/null
@@ -1,219 +0,0 @@
-From 90fe6429624fc48bc0e5d2d7eeecb7498708b5e3 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 18 Apr 2018 19:24:31 +0200
-Subject: [PATCH 18/18] mesh: make forwarding configurable
-
-Allow mesh_fwding to be specified in a mesh bss config, pass that
-to the driver (only nl80211 implemented for now) and announce
-forwarding capability accordingly.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- src/ap/ap_config.h                 | 2 ++
- src/drivers/driver.h               | 2 ++
- src/drivers/driver_nl80211.c       | 3 +++
- wpa_supplicant/config.c            | 4 ++++
- wpa_supplicant/config.h            | 9 +++++++++
- wpa_supplicant/config_file.c       | 4 ++++
- wpa_supplicant/config_ssid.h       | 5 +++++
- wpa_supplicant/mesh.c              | 6 ++++++
- wpa_supplicant/mesh_mpm.c          | 4 ++--
- wpa_supplicant/wpa_supplicant.conf | 3 +++
- 10 files changed, 40 insertions(+), 2 deletions(-)
-
---- a/src/ap/ap_config.h
-+++ b/src/ap/ap_config.h
-@@ -51,6 +51,7 @@ struct mesh_conf {
- 	int dot11MeshRetryTimeout; /* msec */
- 	int dot11MeshConfirmTimeout; /* msec */
- 	int dot11MeshHoldingTimeout; /* msec */
-+	int mesh_fwding;
- };
- 
- #define MAX_STA_COUNT 2007
-@@ -701,6 +702,7 @@ struct hostapd_bss_config {
- 
- #define MESH_ENABLED BIT(0)
- 	int mesh;
-+	int mesh_fwding;
- 
- 	u8 radio_measurements[RRM_CAPABILITIES_IE_LEN];
- 
---- a/src/drivers/driver.h
-+++ b/src/drivers/driver.h
-@@ -1515,6 +1515,7 @@ struct wpa_driver_mesh_bss_params {
- #define WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS	0x00000004
- #define WPA_DRIVER_MESH_CONF_FLAG_HT_OP_MODE		0x00000008
- #define WPA_DRIVER_MESH_CONF_FLAG_RSSI_THRESHOLD	0x00000010
-+#define WPA_DRIVER_MESH_CONF_FLAG_FORWARDING		0x00000020
- 	/*
- 	 * TODO: Other mesh configuration parameters would go here.
- 	 * See NL80211_MESHCONF_* for all the mesh config parameters.
-@@ -1524,6 +1525,7 @@ struct wpa_driver_mesh_bss_params {
- 	int peer_link_timeout;
- 	int max_peer_links;
- 	int rssi_threshold;
-+	int forwarding;
- 	u16 ht_opmode;
- };
- 
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -10023,6 +10023,9 @@ static int nl80211_put_mesh_config(struc
- 	if (((params->flags & WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS) &&
- 	     nla_put_u8(msg, NL80211_MESHCONF_AUTO_OPEN_PLINKS,
- 			params->auto_plinks)) ||
-+	    ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_FORWARDING) &&
-+	     nla_put_u8(msg, NL80211_MESHCONF_FORWARDING,
-+			params->forwarding)) ||
- 	    ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS) &&
- 	     nla_put_u16(msg, NL80211_MESHCONF_MAX_PEER_LINKS,
- 			 params->max_peer_links)) ||
---- a/wpa_supplicant/config.c
-+++ b/wpa_supplicant/config.c
-@@ -2473,6 +2473,7 @@ static const struct parse_data ssid_fiel
- #ifdef CONFIG_MESH
- 	{ INT_RANGE(mode, 0, 5) },
- 	{ INT_RANGE(no_auto_peer, 0, 1) },
-+	{ INT_RANGE(mesh_fwding, 0, 1) },
- 	{ INT_RANGE(mesh_rssi_threshold, -255, 1) },
- #else /* CONFIG_MESH */
- 	{ INT_RANGE(mode, 0, 4) },
-@@ -3049,6 +3050,7 @@ void wpa_config_set_network_defaults(str
- 	ssid->dot11MeshRetryTimeout = DEFAULT_MESH_RETRY_TIMEOUT;
- 	ssid->dot11MeshConfirmTimeout = DEFAULT_MESH_CONFIRM_TIMEOUT;
- 	ssid->dot11MeshHoldingTimeout = DEFAULT_MESH_HOLDING_TIMEOUT;
-+	ssid->mesh_fwding = DEFAULT_MESH_FWDING;
- 	ssid->mesh_rssi_threshold = DEFAULT_MESH_RSSI_THRESHOLD;
- #endif /* CONFIG_MESH */
- #ifdef CONFIG_HT_OVERRIDES
-@@ -4276,6 +4278,7 @@ struct wpa_config * wpa_config_alloc_emp
- 	config->user_mpm = DEFAULT_USER_MPM;
- 	config->max_peer_links = DEFAULT_MAX_PEER_LINKS;
- 	config->mesh_max_inactivity = DEFAULT_MESH_MAX_INACTIVITY;
-+	config->mesh_fwding = DEFAULT_MESH_FWDING;
- 	config->dot11RSNASAERetransPeriod =
- 		DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD;
- 	config->fast_reauth = DEFAULT_FAST_REAUTH;
-@@ -4914,6 +4917,7 @@ static const struct global_parse_data gl
- 	{ INT(user_mpm), 0 },
- 	{ INT_RANGE(max_peer_links, 0, 255), 0 },
- 	{ INT(mesh_max_inactivity), 0 },
-+	{ INT_RANGE(mesh_fwding, 0, 1), 0 },
- 	{ INT(dot11RSNASAERetransPeriod), 0 },
- #endif /* CONFIG_MESH */
- 	{ INT(disable_scan_offload), 0 },
---- a/wpa_supplicant/config.h
-+++ b/wpa_supplicant/config.h
-@@ -18,6 +18,7 @@
- #define DEFAULT_USER_MPM 1
- #define DEFAULT_MAX_PEER_LINKS 99
- #define DEFAULT_MESH_MAX_INACTIVITY 300
-+#define DEFAULT_MESH_FWDING 1
- /*
-  * The default dot11RSNASAERetransPeriod is defined as 40 ms in the standard,
-  * but use 1000 ms in practice to avoid issues on low power CPUs.
-@@ -1351,6 +1352,14 @@ struct wpa_config {
- 	int mesh_max_inactivity;
- 
- 	/**
-+	 * mesh_fwding - Mesh network layer-2 forwarding
-+	 *
-+	 * This controls whether to enable layer-2 forwarding.
-+	 * By default: 1: enabled
-+	 */
-+	int mesh_fwding;
-+
-+	/**
- 	 * dot11RSNASAERetransPeriod - Timeout to retransmit SAE Auth frame
- 	 *
- 	 * This timeout value is used in mesh STA to retransmit
---- a/wpa_supplicant/config_file.c
-+++ b/wpa_supplicant/config_file.c
-@@ -866,6 +866,7 @@ static void wpa_config_write_network(FIL
- #endif /* IEEE8021X_EAPOL */
- 	INT(mode);
- 	INT(no_auto_peer);
-+	INT(mesh_fwding);
- 	INT(frequency);
- 	INT(enable_edmg);
- 	INT(edmg_channel);
-@@ -1527,6 +1528,9 @@ static void wpa_config_write_global(FILE
- 		fprintf(f, "mesh_max_inactivity=%d\n",
- 			config->mesh_max_inactivity);
- 
-+	if (config->mesh_fwding != DEFAULT_MESH_FWDING)
-+		fprintf(f, "mesh_fwding=%d\n", config->mesh_fwding);
-+
- 	if (config->dot11RSNASAERetransPeriod !=
- 	    DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD)
- 		fprintf(f, "dot11RSNASAERetransPeriod=%d\n",
---- a/wpa_supplicant/config_ssid.h
-+++ b/wpa_supplicant/config_ssid.h
-@@ -546,6 +546,11 @@ struct wpa_ssid {
- 	int dot11MeshConfirmTimeout; /* msec */
- 	int dot11MeshHoldingTimeout; /* msec */
- 
-+	/**
-+	 * Mesh network layer-2 forwarding
-+	 */
-+	int mesh_fwding;
-+
- 	int ht;
- 	int ht40;
- 
---- a/wpa_supplicant/mesh.c
-+++ b/wpa_supplicant/mesh.c
-@@ -137,6 +137,7 @@ static struct mesh_conf * mesh_config_cr
- 	conf->mesh_cc_id = 0;
- 	conf->mesh_sp_id = MESH_SYNC_METHOD_NEIGHBOR_OFFSET;
- 	conf->mesh_auth_id = (conf->security & MESH_CONF_SEC_AUTH) ? 1 : 0;
-+	conf->mesh_fwding = ssid->mesh_fwding;
- 	conf->dot11MeshMaxRetries = ssid->dot11MeshMaxRetries;
- 	conf->dot11MeshRetryTimeout = ssid->dot11MeshRetryTimeout;
- 	conf->dot11MeshConfirmTimeout = ssid->dot11MeshConfirmTimeout;
-@@ -434,6 +435,7 @@ static int wpa_supplicant_mesh_init(stru
- 	bss->conf->start_disabled = 1;
- 	bss->conf->mesh = MESH_ENABLED;
- 	bss->conf->ap_max_inactivity = wpa_s->conf->mesh_max_inactivity;
-+	bss->conf->mesh_fwding = wpa_s->conf->mesh_fwding;
- 
- 	if (ieee80211_is_dfs(ssid->frequency, wpa_s->hw.modes,
- 			     wpa_s->hw.num_modes) && wpa_s->conf->country[0]) {
-@@ -647,6 +649,10 @@ int wpa_supplicant_join_mesh(struct wpa_
- 	}
- 	params->conf.peer_link_timeout = wpa_s->conf->mesh_max_inactivity;
- 
-+	/* always explicitely set forwarding to on or off for now */
-+	params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_FORWARDING;
-+	params->conf.forwarding = ssid->mesh_fwding;
-+
- 	os_free(wpa_s->mesh_params);
- 	wpa_s->mesh_params = params;
- 	if (wpa_supplicant_mesh_init(wpa_s, ssid, &params->freq)) {
---- a/wpa_supplicant/mesh_mpm.c
-+++ b/wpa_supplicant/mesh_mpm.c
-@@ -303,9 +303,9 @@ static void mesh_mpm_send_plink_action(s
- 		info = (bss->num_plinks > 63 ? 63 : bss->num_plinks) << 1;
- 		/* TODO: Add Connected to Mesh Gate/AS subfields */
- 		wpabuf_put_u8(buf, info);
--		/* always forwarding & accepting plinks for now */
-+		/* set forwarding & always accepting plinks for now */
- 		wpabuf_put_u8(buf, MESH_CAP_ACCEPT_ADDITIONAL_PEER |
--			      MESH_CAP_FORWARDING);
-+			      (conf->mesh_fwding ? MESH_CAP_FORWARDING : 0));
- 	} else {	/* Peer closing frame */
- 		/* IE: Mesh ID */
- 		wpabuf_put_u8(buf, WLAN_EID_MESH_ID);
---- a/wpa_supplicant/wpa_supplicant.conf
-+++ b/wpa_supplicant/wpa_supplicant.conf
-@@ -150,6 +150,9 @@ ap_scan=1
- # This timeout value is used in mesh STA to clean up inactive stations.
- #mesh_max_inactivity=300
- 
-+# Enable 802.11s layer-2 routing and forwarding
-+#mesh_fwding=1
-+
- # cert_in_cb - Whether to include a peer certificate dump in events
- # This controls whether peer certificates for authentication server and
- # its certificate chain are included in EAP peer certificate events. This is