iw: update to version 4.14

Signed-off-by: Felix Fietkau <nbd@nbd.name>

1 files changed, 23 insertions, 646 deletions

diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
index 25ec1263ad..2052cb2afa 100644
--- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch
+++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
@@ -1,662 +1,39 @@
 --- a/nl80211.h
 +++ b/nl80211.h
-@@ -10,7 +10,7 @@
-  * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
-  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
-  * Copyright 2008 Colin McCabe <colin@cozybit.com>
-- * Copyright 2015	Intel Deutschland GmbH
-+ * Copyright 2015-2017	Intel Deutschland GmbH
+@@ -2153,6 +2153,9 @@ enum nl80211_commands {
+  * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT.
+  * @NL80211_ATTR_PORT_AUTHORIZED: (reserved)
   *
-  * Permission to use, copy, modify, and/or distribute this software for any
-  * purpose with or without fee is hereby granted, provided that the above
-@@ -173,6 +173,65 @@
-  */
- 
- /**
-+ * DOC: WPA/WPA2 EAPOL handshake offload
-+ *
-+ * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag drivers
-+ * can indicate they support offloading EAPOL handshakes for WPA/WPA2
-+ * preshared key authentication. In %NL80211_CMD_CONNECT the preshared
-+ * key should be specified using %NL80211_ATTR_PMK. Drivers supporting
-+ * this offload may reject the %NL80211_CMD_CONNECT when no preshared
-+ * key material is provided, for example when that driver does not
-+ * support setting the temporal keys through %CMD_NEW_KEY.
-+ *
-+ * Similarly @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X flag can be
-+ * set by drivers indicating offload support of the PTK/GTK EAPOL
-+ * handshakes during 802.1X authentication. In order to use the offload
-+ * the %NL80211_CMD_CONNECT should have %NL80211_ATTR_WANT_1X_4WAY_HS
-+ * attribute flag. Drivers supporting this offload may reject the
-+ * %NL80211_CMD_CONNECT when the attribute flag is not present.
-+ *
-+ * For 802.1X the PMK or PMK-R0 are set by providing %NL80211_ATTR_PMK
-+ * using %NL80211_CMD_SET_PMK. For offloaded FT support also
-+ * %NL80211_ATTR_PMKR0_NAME must be provided.
-+ */
-+
-+/**
-+ * DOC: FILS shared key authentication offload
-+ *
-+ * FILS shared key authentication offload can be advertized by drivers by
-+ * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support
-+ * FILS shared key authentication offload should be able to construct the
-+ * authentication and association frames for FILS shared key authentication and
-+ * eventually do a key derivation as per IEEE 802.11ai. The below additional
-+ * parameters should be given to driver in %NL80211_CMD_CONNECT.
-+ *	%NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai
-+ *	%NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai
-+ *	%NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message
-+ *	%NL80211_ATTR_FILS_ERP_RRK - used to generate the rIK and rMSK
-+ * rIK should be used to generate an authentication tag on the ERP message and
-+ * rMSK should be used to derive a PMKSA.
-+ * rIK, rMSK should be generated and keyname_nai, sequence number should be used
-+ * as specified in IETF RFC 6696.
-+ *
-+ * When FILS shared key authentication is completed, driver needs to provide the
-+ * below additional parameters to userspace.
-+ *	%NL80211_ATTR_FILS_KEK - used for key renewal
-+ *	%NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges
-+ *	%NL80211_ATTR_PMKID - used to identify the PMKSA used/generated
-+ *	%Nl80211_ATTR_PMK - used to update PMKSA cache in userspace
-+ * The PMKSA can be maintained in userspace persistently so that it can be used
-+ * later after reboots or wifi turn off/on also.
-+ *
-+ * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS
-+ * capable AP supporting PMK caching. It specifies the scope within which the
-+ * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and
-+ * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based
-+ * on FILS cache identifier. Additionally %NL80211_ATTR_PMK is used with
-+ * %NL80211_SET_PMKSA to specify the PMK corresponding to a PMKSA for driver to
-+ * use in a FILS shared key connection with PMKSA caching.
-+ */
-+
-+/**
-  * enum nl80211_commands - supported nl80211 commands
-  *
-  * @NL80211_CMD_UNSPEC: unspecified command to catch errors
-@@ -323,7 +382,7 @@
-  * @NL80211_CMD_GET_SCAN: get scan results
-  * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
-  *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
-- *	probe requests at CCK rate or not. %NL80211_ATTR_MAC can be used to
-+ *	probe requests at CCK rate or not. %NL80211_ATTR_BSSID can be used to
-  *	specify a BSSID to scan for; if not included, the wildcard BSSID will
-  *	be used.
-  * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
-@@ -351,7 +410,9 @@
-  *	are used.  Extra IEs can also be passed from the userspace by
-  *	using the %NL80211_ATTR_IE attribute.  The first cycle of the
-  *	scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY
-- *	is supplied.
-+ *	is supplied. If the device supports multiple concurrent scheduled
-+ *	scans, it will allow such when the caller provides the flag attribute
-+ *	%NL80211_ATTR_SCHED_SCAN_MULTI to indicate user-space support for it.
-  * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
-  *	scheduled scan is not running. The caller may assume that as soon
-  *	as the call returns, it is safe to start a new scheduled scan again.
-@@ -370,10 +431,18 @@
-  * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
-  *	NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
-  *
-- * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry, using %NL80211_ATTR_MAC
-- *	(for the BSSID) and %NL80211_ATTR_PMKID.
-+ * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry using %NL80211_ATTR_MAC
-+ *	(for the BSSID), %NL80211_ATTR_PMKID, and optionally %NL80211_ATTR_PMK
-+ *	(PMK is used for PTKSA derivation in case of FILS shared key offload) or
-+ *	using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID,
-+ *	%NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS
-+ *	authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier
-+ *	advertized by a FILS capable AP identifying the scope of PMKSA in an
-+ *	ESS.
-  * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
-- *	(for the BSSID) and %NL80211_ATTR_PMKID.
-+ *	(for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID,
-+ *	%NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS
-+ *	authentication.
-  * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
-  *
-  * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
-@@ -500,8 +569,13 @@
-  *	authentication/association or not receiving a response from the AP.
-  *	Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as
-  *	well to remain backwards compatible.
-- * @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
-- *	sent as an event when the card/driver roamed by itself.
-+ * @NL80211_CMD_ROAM: notifcation indicating the card/driver roamed by itself.
-+ *	When the driver roamed in a network that requires 802.1X authentication,
-+ *	%NL80211_ATTR_PORT_AUTHORIZED should be set if the 802.1X authentication
-+ *	was done by the driver or if roaming was done using Fast Transition
-+ *	protocol (in which case 802.1X authentication is not needed). If
-+ *	%NL80211_ATTR_PORT_AUTHORIZED is not set, user space is responsible for
-+ *	the 802.1X authentication.
-  * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
-  *	userspace that a connection was dropped by the AP or due to other
-  *	reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
-@@ -600,6 +674,20 @@
-  *
-  * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
-  *
-+ * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform
-+ *	multicast to unicast conversion. When enabled, all multicast packets
-+ *	with ethertype ARP, IPv4 or IPv6 (possibly within an 802.1Q header)
-+ *	will be sent out to each station once with the destination (multicast)
-+ *	MAC address replaced by the station's MAC address. Note that this may
-+ *	break certain expectations of the receiver, e.g. the ability to drop
-+ *	unicast IP packets encapsulated in multicast L2 frames, or the ability
-+ *	to not send destination unreachable messages in such cases.
-+ *	This can only be toggled per BSS. Configure this on an interface of
-+ *	type %NL80211_IFTYPE_AP. It applies to all its VLAN interfaces
-+ *	(%NL80211_IFTYPE_AP_VLAN), except for those in 4addr (WDS) mode.
-+ *	If %NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED is not present with this
-+ *	command, the feature is disabled.
-+ *
-  * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
-  *	mesh config parameters may be given.
-  * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
-@@ -840,12 +928,15 @@
-  *	cfg80211_scan_done().
-  *
-  * @NL80211_CMD_START_NAN: Start NAN operation, identified by its
-- *	%NL80211_ATTR_WDEV interface. This interface must have been previously
-- *	created with %NL80211_CMD_NEW_INTERFACE. After it has been started, the
-- *	NAN interface will create or join a cluster. This command must have a
-- *	valid %NL80211_ATTR_NAN_MASTER_PREF attribute and optional
-- *	%NL80211_ATTR_NAN_DUAL attributes.
-- *	After this command NAN functions can be added.
-+ *	%NL80211_ATTR_WDEV interface. This interface must have been
-+ *	previously created with %NL80211_CMD_NEW_INTERFACE. After it
-+ *	has been started, the NAN interface will create or join a
-+ *	cluster. This command must have a valid
-+ *	%NL80211_ATTR_NAN_MASTER_PREF attribute and optional
-+ *	%NL80211_ATTR_BANDS attributes.  If %NL80211_ATTR_BANDS is
-+ *	omitted or set to 0, it means don't-care and the device will
-+ *	decide what to use.  After this command NAN functions can be
-+ *	added.
-  * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by
-  *	its %NL80211_ATTR_WDEV interface.
-  * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined
-@@ -866,14 +957,32 @@
-  *	This command is also used as a notification sent when a NAN function is
-  *	terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID
-  *	and %NL80211_ATTR_COOKIE attributes.
-- * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN configuration. NAN
-- *	must be operational (%NL80211_CMD_START_NAN was executed).
-- *	It must contain at least one of the following attributes:
-- *	%NL80211_ATTR_NAN_MASTER_PREF, %NL80211_ATTR_NAN_DUAL.
-+ * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN
-+ *	configuration. NAN must be operational (%NL80211_CMD_START_NAN
-+ *	was executed).  It must contain at least one of the following
-+ *	attributes: %NL80211_ATTR_NAN_MASTER_PREF,
-+ *	%NL80211_ATTR_BANDS.  If %NL80211_ATTR_BANDS is omitted, the
-+ *	current configuration is not changed.  If it is present but
-+ *	set to zero, the configuration is changed to don't-care
-+ *	(i.e. the device can decide what to do).
-  * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported.
-  *	This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
-  *	%NL80211_ATTR_COOKIE.
-  *
-+ * @NL80211_CMD_UPDATE_CONNECT_PARAMS: Update one or more connect parameters
-+ *	for subsequent roaming cases if the driver or firmware uses internal
-+ *	BSS selection. This command can be issued only while connected and it
-+ *	does not result in a change for the current association. Currently,
-+ *	only the %NL80211_ATTR_IE data is used and updated with this command.
-+ *
-+ * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0
-+ *	for the given authenticator address (specified with &NL80211_ATTR_MAC).
-+ *	When &NL80211_ATTR_PMKR0_NAME is set, &NL80211_ATTR_PMK specifies the
-+ *	PMK-R0, otherwise it specifies the PMK.
-+ * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
-+ *	configured PMK for the authenticator address identified by
-+ *	&NL80211_ATTR_MAC.
-+ *
-  * @NL80211_CMD_MAX: highest used command number
-  * @__NL80211_CMD_AFTER_LAST: internal use
-  */
-@@ -1069,6 +1178,13 @@ enum nl80211_commands {
- 	NL80211_CMD_CHANGE_NAN_CONFIG,
- 	NL80211_CMD_NAN_MATCH,
- 
-+	NL80211_CMD_SET_MULTICAST_TO_UNICAST,
-+
-+	NL80211_CMD_UPDATE_CONNECT_PARAMS,
-+
-+	NL80211_CMD_SET_PMK,
-+	NL80211_CMD_DEL_PMK,
-+
- 	/* add new commands above here */
- 
- 	/* used to define NL80211_CMD_MAX below */
-@@ -1638,8 +1754,16 @@ enum nl80211_commands {
-  *	the connection request from a station. nl80211_connect_failed_reason
-  *	enum has different reasons of connection failure.
-  *
-- * @NL80211_ATTR_SAE_DATA: SAE elements in Authentication frames. This starts
-- *	with the Authentication transaction sequence number field.
-+ * @NL80211_ATTR_AUTH_DATA: Fields and elements in Authentication frames.
-+ *	This contains the authentication frame body (non-IE and IE data),
-+ *	excluding the Authentication algorithm number, i.e., starting at the
-+ *	Authentication transaction sequence number field. It is used with
-+ *	authentication algorithms that need special fields to be added into
-+ *	the frames (SAE and FILS). Currently, only the SAE cases use the
-+ *	initial two fields (Authentication transaction sequence number and
-+ *	Status code). However, those fields are included in the attribute data
-+ *	for all authentication algorithms to keep the attribute definition
-+ *	consistent.
-  *
-  * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from
-  *	association request when used with NL80211_CMD_NEW_STATION)
-@@ -1740,7 +1864,9 @@ enum nl80211_commands {
-  *
-  * @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode
-  *	Notification Element based on association request when used with
-- *	%NL80211_CMD_NEW_STATION; u8 attribute.
-+ *	%NL80211_CMD_NEW_STATION or %NL80211_CMD_SET_STATION (only when
-+ *	%NL80211_FEATURE_FULL_AP_CLIENT_STATE is supported, or with TDLS);
-+ *	u8 attribute.
-  *
-  * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if
-  *	%NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet)
-@@ -1783,11 +1909,12 @@ enum nl80211_commands {
-  *	that configured the indoor setting, and the indoor operation would be
-  *	cleared when the socket is closed.
-  *	If set during NAN interface creation, the interface will be destroyed
-- *	if the socket is closed just like any other interface. Moreover, only
-- *	the netlink socket that created the interface will be allowed to add
-- *	and remove functions. NAN notifications will be sent in unicast to that
-- *	socket. Without this attribute, any socket can add functions and the
-- *	notifications will be sent to the %NL80211_MCGRP_NAN multicast group.
-+ *	if the socket is closed just like any other interface. Moreover, NAN
-+ *	notifications will be sent in unicast to that socket. Without this
-+ *	attribute, the notifications will be sent to the %NL80211_MCGRP_NAN
-+ *	multicast group.
-+ *	If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the
-+ *	station will deauthenticate when the socket is closed.
-  *
-  * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
-  *	the TDLS link initiator.
-@@ -1927,15 +2054,93 @@ enum nl80211_commands {
-  *	%NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0.
-  *	Also, values 1 and 255 are reserved for certification purposes and
-  *	should not be used during a normal device operation.
-- * @NL80211_ATTR_NAN_DUAL: NAN dual band operation config (see
-- *	&enum nl80211_nan_dual_band_conf). This attribute is used with
-- *	%NL80211_CMD_START_NAN and optionally with
-- *	%NL80211_CMD_CHANGE_NAN_CONFIG.
-+ * @NL80211_ATTR_BANDS: operating bands configuration.  This is a u32
-+ *	bitmask of BIT(NL80211_BAND_*) as described in %enum
-+ *	nl80211_band.  For instance, for NL80211_BAND_2GHZ, bit 0
-+ *	would be set.  This attribute is used with
-+ *	%NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG, and
-+ *	it is optional.  If no bands are set, it means don't-care and
-+ *	the device will decide what to use.
-  * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See
-  *	&enum nl80211_nan_func_attributes for description of this nested
-  *	attribute.
-  * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute.
-  *	See &enum nl80211_nan_match_attributes.
-+ * @NL80211_ATTR_FILS_KEK: KEK for FILS (Re)Association Request/Response frame
-+ *	protection.
-+ * @NL80211_ATTR_FILS_NONCES: Nonces (part of AAD) for FILS (Re)Association
-+ *	Request/Response frame protection. This attribute contains the 16 octet
-+ *	STA Nonce followed by 16 octets of AP Nonce.
-+ *
-+ * @NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED: Indicates whether or not multicast
-+ *	packets should be send out as unicast to all stations (flag attribute).
-+ *
-+ * @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also
-+ *	used in various commands/events for specifying the BSSID.
-+ *
-+ * @NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI: Relative RSSI threshold by which
-+ *	other BSSs has to be better or slightly worse than the current
-+ *	connected BSS so that they get reported to user space.
-+ *	This will give an opportunity to userspace to consider connecting to
-+ *	other matching BSSs which have better or slightly worse RSSI than
-+ *	the current connected BSS by using an offloaded operation to avoid
-+ *	unnecessary wakeups.
-+ *
-+ * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in
-+ *	the specified band is to be adjusted before doing
-+ *	%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparision to figure out
-+ *	better BSSs. The attribute value is a packed structure
-+ *	value as specified by &struct nl80211_bss_select_rssi_adjust.
-+ *
-+ * @NL80211_ATTR_TIMEOUT_REASON: The reason for which an operation timed out.
-+ *	u32 attribute with an &enum nl80211_timeout_reason value. This is used,
-+ *	e.g., with %NL80211_CMD_CONNECT event.
-+ *
-+ * @NL80211_ATTR_FILS_ERP_USERNAME: EAP Re-authentication Protocol (ERP)
-+ *	username part of NAI used to refer keys rRK and rIK. This is used with
-+ *	%NL80211_CMD_CONNECT.
-+ *
-+ * @NL80211_ATTR_FILS_ERP_REALM: EAP Re-authentication Protocol (ERP) realm part
-+ *	of NAI specifying the domain name of the ER server. This is used with
-+ *	%NL80211_CMD_CONNECT.
-+ *
-+ * @NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM: Unsigned 16-bit ERP next sequence number
-+ *	to use in ERP messages. This is used in generating the FILS wrapped data
-+ *	for FILS authentication and is used with %NL80211_CMD_CONNECT.
-+ *
-+ * @NL80211_ATTR_FILS_ERP_RRK: ERP re-authentication Root Key (rRK) for the
-+ *	NAI specified by %NL80211_ATTR_FILS_ERP_USERNAME and
-+ *	%NL80211_ATTR_FILS_ERP_REALM. This is used for generating rIK and rMSK
-+ *	from successful FILS authentication and is used with
-+ *	%NL80211_CMD_CONNECT.
-+ *
-+ * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP
-+ *	identifying the scope of PMKSAs. This is used with
-+ *	@NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA.
-+ *
-+ * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with
-+ *	%NL80211_CMD_SET_PMKSA for the PMKSA identified by %NL80211_ATTR_PMKID.
-+ *	For %NL80211_CMD_CONNECT it is used to provide PSK for offloading 4-way
-+ *	handshake for WPA/WPA2-PSK networks. For 802.1X authentication it is
-+ *	used with %NL80211_CMD_SET_PMK. For offloaded FT support this attribute
-+ *	specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME is included as well.
-+ *
-+ * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to
-+ *	indicate that it supports multiple active scheduled scan requests.
-+ * @NL80211_ATTR_SCHED_SCAN_MAX_REQS: indicates maximum number of scheduled
-+ *	scan request that may be active for the device (u32).
-+ *
-+ * @NL80211_ATTR_WANT_1X_4WAY_HS: flag attribute which user-space can include
-+ *	in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it
-+ *	wants to use the supported offload of the 4-way handshake.
-+ * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT.
-+ * @NL80211_ATTR_PORT_AUTHORIZED: flag attribute used in %NL80211_CMD_ROAMED
-+ *	notification indicating that that 802.1X authentication was done by
-+ *	the driver or is not needed (because roaming used the Fast Transition
-+ *	protocol).
-+ *
 + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
 + *	transmit power to stay within regulatory limits. u32, dBi.
-  *
++ *
   * @NUM_NL80211_ATTR: total number of nl80211_attrs available
   * @NL80211_ATTR_MAX: highest attribute number currently defined
-@@ -2195,7 +2400,7 @@ enum nl80211_attrs {
- 
- 	NL80211_ATTR_CONN_FAILED_REASON,
+  * @__NL80211_ATTR_AFTER_LAST: internal use
+@@ -2579,6 +2582,8 @@ enum nl80211_attrs {
+ 	NL80211_ATTR_PMKR0_NAME,
+ 	NL80211_ATTR_PORT_AUTHORIZED,
  
--	NL80211_ATTR_SAE_DATA,
-+	NL80211_ATTR_AUTH_DATA,
- 
- 	NL80211_ATTR_VHT_CAPABILITY,
- 
-@@ -2332,10 +2537,39 @@ enum nl80211_attrs {
- 	NL80211_ATTR_MESH_PEER_AID,
- 
- 	NL80211_ATTR_NAN_MASTER_PREF,
--	NL80211_ATTR_NAN_DUAL,
-+	NL80211_ATTR_BANDS,
- 	NL80211_ATTR_NAN_FUNC,
- 	NL80211_ATTR_NAN_MATCH,
- 
-+	NL80211_ATTR_FILS_KEK,
-+	NL80211_ATTR_FILS_NONCES,
-+
-+	NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED,
-+
-+	NL80211_ATTR_BSSID,
-+
-+	NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI,
-+	NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST,
-+
-+	NL80211_ATTR_TIMEOUT_REASON,
-+
-+	NL80211_ATTR_FILS_ERP_USERNAME,
-+	NL80211_ATTR_FILS_ERP_REALM,
-+	NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM,
-+	NL80211_ATTR_FILS_ERP_RRK,
-+	NL80211_ATTR_FILS_CACHE_ID,
-+
-+	NL80211_ATTR_PMK,
-+
-+	NL80211_ATTR_SCHED_SCAN_MULTI,
-+	NL80211_ATTR_SCHED_SCAN_MAX_REQS,
-+
-+	NL80211_ATTR_WANT_1X_4WAY_HS,
-+	NL80211_ATTR_PMKR0_NAME,
-+	NL80211_ATTR_PORT_AUTHORIZED,
-+
 +	NL80211_ATTR_WIPHY_ANTENNA_GAIN,
 +
  	/* add attributes here, update the policy in nl80211.c */
  
  	__NL80211_ATTR_AFTER_LAST,
-@@ -2347,6 +2581,7 @@ enum nl80211_attrs {
- #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
- #define	NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
- #define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER
-+#define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA
- 
- /*
-  * Allow user space programs to use #ifdef on new attributes by defining them
-@@ -3019,6 +3254,7 @@ enum nl80211_reg_rule_attr {
-  * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
-  * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
-  *	only report BSS with matching SSID.
-+ *	(This cannot be used together with BSSID.)
-  * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
-  *	BSS in scan results. Filtering is turned off if not specified. Note that
-  *	if this attribute is in a match set of its own, then it is treated as
-@@ -3027,6 +3263,15 @@ enum nl80211_reg_rule_attr {
-  *	how this API was implemented in the past. Also, due to the same problem,
-  *	the only way to create a matchset with only an RSSI filter (with this
-  *	attribute) is if there's only a single matchset with the RSSI attribute.
-+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI: Flag indicating whether
-+ *	%NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to be used as absolute RSSI or
-+ *	relative to current bss's RSSI.
-+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST: When present the RSSI level for
-+ *	BSS-es in the specified band is to be adjusted before doing
-+ *	RSSI-based BSS selection. The attribute value is a packed structure
-+ *	value as specified by &struct nl80211_bss_select_rssi_adjust.
-+ * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching
-+ *	(this cannot be used together with SSID).
-  * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
-  *	attribute number currently defined
-  * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
-@@ -3036,6 +3281,9 @@ enum nl80211_sched_scan_match_attr {
- 
- 	NL80211_SCHED_SCAN_MATCH_ATTR_SSID,
- 	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,
-+	NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
-+	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
-+	NL80211_SCHED_SCAN_MATCH_ATTR_BSSID,
- 
- 	/* keep last */
- 	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
-@@ -3660,6 +3908,9 @@ enum nl80211_bss_status {
-  * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
-  * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
-  * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals
-+ * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key
-+ * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS
-+ * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key
-  * @__NL80211_AUTHTYPE_NUM: internal
-  * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
-  * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
-@@ -3672,6 +3923,9 @@ enum nl80211_auth_type {
- 	NL80211_AUTHTYPE_FT,
- 	NL80211_AUTHTYPE_NETWORK_EAP,
- 	NL80211_AUTHTYPE_SAE,
-+	NL80211_AUTHTYPE_FILS_SK,
-+	NL80211_AUTHTYPE_FILS_SK_PFS,
-+	NL80211_AUTHTYPE_FILS_PK,
- 
- 	/* keep last */
- 	__NL80211_AUTHTYPE_NUM,
-@@ -3839,7 +4093,10 @@ enum nl80211_ps_state {
-  * @__NL80211_ATTR_CQM_INVALID: invalid
-  * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies
-  *	the threshold for the RSSI level at which an event will be sent. Zero
-- *	to disable.
-+ *	to disable.  Alternatively, if %NL80211_EXT_FEATURE_CQM_RSSI_LIST is
-+ *	set, multiple values can be supplied as a low-to-high sorted array of
-+ *	threshold values in dBm.  Events will be sent when the RSSI value
-+ *	crosses any of the thresholds.
-  * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies
-  *	the minimum amount the RSSI level must change after an event before a
-  *	new event may be issued (to reduce effects of RSSI oscillation).
-@@ -3859,6 +4116,8 @@ enum nl80211_ps_state {
-  *	%NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting.
-  * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon
-  *	loss event
-+ * @NL80211_ATTR_CQM_RSSI_LEVEL: the RSSI value in dBm that triggered the
-+ *	RSSI threshold event.
-  * @__NL80211_ATTR_CQM_AFTER_LAST: internal
-  * @NL80211_ATTR_CQM_MAX: highest key attribute
+@@ -3862,9 +3867,6 @@ enum nl80211_bss_scan_width {
+  *	@NL80211_BSS_PARENT_BSSID. (u64).
+  * @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF
+  *	is set.
+- * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update.
+- *	Contains a nested array of signal strength attributes (u8, dBm),
+- *	using the nesting index as the antenna number.
+  * @__NL80211_BSS_AFTER_LAST: internal
+  * @NL80211_BSS_MAX: highest BSS attribute
   */
-@@ -3872,6 +4131,7 @@ enum nl80211_attr_cqm {
- 	NL80211_ATTR_CQM_TXE_PKTS,
- 	NL80211_ATTR_CQM_TXE_INTVL,
- 	NL80211_ATTR_CQM_BEACON_LOSS_EVENT,
-+	NL80211_ATTR_CQM_RSSI_LEVEL,
+@@ -3888,7 +3890,6 @@ enum nl80211_bss {
+ 	NL80211_BSS_PAD,
+ 	NL80211_BSS_PARENT_TSF,
+ 	NL80211_BSS_PARENT_BSSID,
+-	NL80211_BSS_CHAIN_SIGNAL,
  
  	/* keep last */
- 	__NL80211_ATTR_CQM_AFTER_LAST,
-@@ -4280,6 +4540,9 @@ enum nl80211_iface_limit_attrs {
-  *	of supported channel widths for radar detection.
-  * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap
-  *	of supported regulatory regions for radar detection.
-+ * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of
-+ *	different beacon intervals supported by all the interface combinations
-+ *	in this group (if not present, all beacon intervals be identical).
-  * @NUM_NL80211_IFACE_COMB: number of attributes
-  * @MAX_NL80211_IFACE_COMB: highest attribute number
-  *
-@@ -4287,8 +4550,8 @@ enum nl80211_iface_limit_attrs {
-  *	limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
-  *	=> allows an AP and a STA that must match BIs
-  *
-- *	numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
-- *	=> allows 8 of AP/GO
-+ *	numbers = [ #{AP, P2P-GO} <= 8 ], BI min gcd, channels = 1, max = 8,
-+ *	=> allows 8 of AP/GO that can have BI gcd >= min gcd
-  *
-  *	numbers = [ #{STA} <= 2 ], channels = 2, max = 2
-  *	=> allows two STAs on different channels
-@@ -4314,6 +4577,7 @@ enum nl80211_if_combination_attrs {
- 	NL80211_IFACE_COMB_NUM_CHANNELS,
- 	NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
- 	NL80211_IFACE_COMB_RADAR_DETECT_REGIONS,
-+	NL80211_IFACE_COMB_BI_MIN_GCD,
- 
- 	/* keep last */
- 	NUM_NL80211_IFACE_COMB,
-@@ -4634,6 +4898,27 @@ enum nl80211_feature_flags {
-  *	configuration (AP/mesh) with HT rates.
-  * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate
-  *	configuration (AP/mesh) with VHT rates.
-+ * @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup
-+ *	with user space SME (NL80211_CMD_AUTHENTICATE) in station mode.
-+ * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA: This driver supports randomized TA
-+ *	in @NL80211_CMD_FRAME while not associated.
-+ * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports
-+ *	randomized TA in @NL80211_CMD_FRAME while associated.
-+ * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan
-+ *	for reporting BSSs with better RSSI than the current connected BSS
-+ *	(%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI).
-+ * @NL80211_EXT_FEATURE_CQM_RSSI_LIST: With this driver the
-+ *	%NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more
-+ *	RSSI threshold values to monitor rather than exactly one threshold.
-+ * @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD: Driver SME supports FILS shared key
-+ *	authentication with %NL80211_CMD_CONNECT.
-+ * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK: Device wants to do 4-way
-+ *	handshake with PSK in station mode (PSK is passed as part of the connect
-+ *	and associate commands), doing it in the host might not be supported.
-+ * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X: Device wants to do doing 4-way
-+ *	handshake with 802.1X in station mode (will pass EAP frames to the host
-+ *	and accept the set_pmk/del_pmk commands), doing it in the host might not
-+ *	be supported.
-  *
-  * @NUM_NL80211_EXT_FEATURES: number of extended features.
-  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
-@@ -4648,6 +4933,14 @@ enum nl80211_ext_feature_index {
- 	NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
- 	NL80211_EXT_FEATURE_BEACON_RATE_HT,
- 	NL80211_EXT_FEATURE_BEACON_RATE_VHT,
-+	NL80211_EXT_FEATURE_FILS_STA,
-+	NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA,
-+	NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED,
-+	NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI,
-+	NL80211_EXT_FEATURE_CQM_RSSI_LIST,
-+	NL80211_EXT_FEATURE_FILS_SK_OFFLOAD,
-+	NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK,
-+	NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X,
- 
- 	/* add new features before the definition below */
- 	NUM_NL80211_EXT_FEATURES,
-@@ -4687,6 +4980,21 @@ enum nl80211_connect_failed_reason {
- };
- 
- /**
-+ * enum nl80211_timeout_reason - timeout reasons
-+ *
-+ * @NL80211_TIMEOUT_UNSPECIFIED: Timeout reason unspecified.
-+ * @NL80211_TIMEOUT_SCAN: Scan (AP discovery) timed out.
-+ * @NL80211_TIMEOUT_AUTH: Authentication timed out.
-+ * @NL80211_TIMEOUT_ASSOC: Association timed out.
-+ */
-+enum nl80211_timeout_reason {
-+	NL80211_TIMEOUT_UNSPECIFIED,
-+	NL80211_TIMEOUT_SCAN,
-+	NL80211_TIMEOUT_AUTH,
-+	NL80211_TIMEOUT_ASSOC,
-+};
-+
-+/**
-  * enum nl80211_scan_flags -  scan request control flags
-  *
-  * Scan request control flags are used to control the handling
-@@ -4768,12 +5076,17 @@ enum nl80211_smps_mode {
-  *	change to the channel status.
-  * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is
-  *	over, channel becomes usable.
-+ * @NL80211_RADAR_PRE_CAC_EXPIRED: Channel Availability Check done on this
-+ *	non-operating channel is expired and no longer valid. New CAC must
-+ *	be done on this channel before starting the operation. This is not
-+ *	applicable for ETSI dfs domain where pre-CAC is valid for ever.
-  */
- enum nl80211_radar_event {
- 	NL80211_RADAR_DETECTED,
- 	NL80211_RADAR_CAC_FINISHED,
- 	NL80211_RADAR_CAC_ABORTED,
- 	NL80211_RADAR_NOP_FINISHED,
-+	NL80211_RADAR_PRE_CAC_EXPIRED,
- };
- 
- /**
-@@ -4900,8 +5213,9 @@ enum nl80211_sched_scan_plan {
- /**
-  * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters.
-  *
-- * @band: band of BSS that must match for RSSI value adjustment.
-- * @delta: value used to adjust the RSSI value of matching BSS.
-+ * @band: band of BSS that must match for RSSI value adjustment. The value
-+ *	of this field is according to &enum nl80211_band.
-+ * @delta: value used to adjust the RSSI value of matching BSS in dB.
-  */
- struct nl80211_bss_select_rssi_adjust {
- 	__u8 band;
-@@ -4942,21 +5256,6 @@ enum nl80211_bss_select_attr {
- };
- 
- /**
-- * enum nl80211_nan_dual_band_conf - NAN dual band configuration
-- *
-- * Defines the NAN dual band mode of operation
-- *
-- * @NL80211_NAN_BAND_DEFAULT: device default mode
-- * @NL80211_NAN_BAND_2GHZ: 2.4GHz mode
-- * @NL80211_NAN_BAND_5GHZ: 5GHz mode
--  */
--enum nl80211_nan_dual_band_conf {
--	NL80211_NAN_BAND_DEFAULT	= 1 << 0,
--	NL80211_NAN_BAND_2GHZ		= 1 << 1,
--	NL80211_NAN_BAND_5GHZ		= 1 << 2,
--};
--
--/**
-  * enum nl80211_nan_function_type - NAN function type
-  *
-  * Defines the function type of a NAN function
+ 	__NL80211_BSS_AFTER_LAST,