iw: update to version 4.7

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

1 files changed, 20 insertions, 303 deletions

diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
index e5ea8f7c8a..cf39a3e5fc 100644
--- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch
+++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
@@ -1,145 +1,9 @@
 --- a/nl80211.h
 +++ b/nl80211.h
-@@ -10,6 +10,7 @@
-  * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
-  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
-  * Copyright 2008 Colin McCabe <colin@cozybit.com>
-+ * Copyright 2015	Intel Deutschland GmbH
+@@ -1817,6 +1817,11 @@ enum nl80211_commands {
+  * @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported
+  *	or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status
   *
-  * Permission to use, copy, modify, and/or distribute this software for any
-  * purpose with or without fee is hereby granted, provided that the above
-@@ -321,14 +322,24 @@
-  * @NL80211_CMD_GET_SCAN: get scan results
-  * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
-  *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
-- *	probe requests at CCK rate or not.
-+ *	probe requests at CCK rate or not. %NL80211_ATTR_MAC can be used to
-+ *	specify a BSSID to scan for; if not included, the wildcard BSSID will
-+ *	be used.
-  * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
-  *	NL80211_CMD_GET_SCAN and on the "scan" multicast group)
-  * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
-  *	partial scan results may be available
-  *
-  * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
-- *	intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
-+ *	intervals and certain number of cycles, as specified by
-+ *	%NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is
-+ *	not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified,
-+ *	scheduled scan will run in an infinite loop with the specified interval.
-+ *	These attributes are mutually exculsive,
-+ *	i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if
-+ *	NL80211_ATTR_SCHED_SCAN_PLANS is defined.
-+ *	If for some reason scheduled scan is aborted by the driver, all scan
-+ *	plans are canceled (including scan plans that did not start yet).
-  *	Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
-  *	are passed, they are used in the probe requests.  For
-  *	broadcast, a broadcast SSID must be passed (ie. an empty
-@@ -418,7 +429,11 @@
-  * @NL80211_CMD_ASSOCIATE: association request and notification; like
-  *	NL80211_CMD_AUTHENTICATE but for Association and Reassociation
-  *	(similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
-- *	MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives).
-+ *	MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). The
-+ *	%NL80211_ATTR_PREV_BSSID attribute is used to specify whether the
-+ *	request is for the initial association to an ESS (that attribute not
-+ *	included) or for reassociation within the ESS (that attribute is
-+ *	included).
-  * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
-  *	NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
-  *	MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
-@@ -468,6 +483,9 @@
-  *	set of BSSID,frequency parameters is used (i.e., either the enforcing
-  *	%NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict
-  *	%NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT).
-+ *	%NL80211_ATTR_PREV_BSSID can be used to request a reassociation within
-+ *	the ESS in case the device is already associated and an association with
-+ *	a different BSS is desired.
-  *	Background scan period can optionally be
-  *	specified in %NL80211_ATTR_BG_SCAN_PERIOD,
-  *	if not specified default background scan configuration
-@@ -811,6 +829,10 @@
-  *	as an event to indicate changes for devices with wiphy-specific regdom
-  *	management.
-  *
-+ * @NL80211_CMD_ABORT_SCAN: Stop an ongoing scan. Returns -ENOENT if a scan is
-+ *	not running. The driver indicates the status of the scan through
-+ *	cfg80211_scan_done().
-+ *
-  * @NL80211_CMD_MAX: highest used command number
-  * @__NL80211_CMD_AFTER_LAST: internal use
-  */
-@@ -997,6 +1019,8 @@ enum nl80211_commands {
- 
- 	NL80211_CMD_WIPHY_REG_CHANGE,
- 
-+	NL80211_CMD_ABORT_SCAN,
-+
- 	/* add new commands above here */
- 
- 	/* used to define NL80211_CMD_MAX below */
-@@ -1270,8 +1294,11 @@ enum nl80211_commands {
-  * @NL80211_ATTR_RESP_IE: (Re)association response information elements as
-  *	sent by peer, for ROAM and successful CONNECT events.
-  *
-- * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE
-- *	commands to specify using a reassociate frame
-+ * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used in ASSOCIATE and CONNECT
-+ *	commands to specify a request to reassociate within an ESS, i.e., to use
-+ *	Reassociate Request frame (with the value of this attribute in the
-+ *	Current AP address field) instead of Association Request frame which is
-+ *	used for the initial association to an ESS.
-  *
-  * @NL80211_ATTR_KEY: key information in a nested attribute with
-  *	%NL80211_KEY_* sub-attributes
-@@ -1712,6 +1739,8 @@ enum nl80211_commands {
-  *	underlying device supports these minimal RRM features:
-  *		%NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES,
-  *		%NL80211_FEATURE_QUIET,
-+ *	Or, if global RRM is supported, see:
-+ *		%NL80211_EXT_FEATURE_RRM
-  *	If this flag is used, driver must add the Power Capabilities IE to the
-  *	association request. In addition, it must also set the RRM capability
-  *	flag in the association request's Capability Info field.
-@@ -1755,12 +1784,44 @@ enum nl80211_commands {
-  *	over all channels.
-  *
-  * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before the first cycle of a
-- *	scheduled scan (or a WoWLAN net-detect scan) is started, u32
-- *	in seconds.
-+ *	scheduled scan is started.  Or the delay before a WoWLAN
-+ *	net-detect scan is started, counting from the moment the
-+ *	system is suspended.  This value is a u32, in seconds.
- 
-  * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
-  *      is operating in an indoor environment.
-  *
-+ * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS: maximum number of scan plans for
-+ *	scheduled scan supported by the device (u32), a wiphy attribute.
-+ * @NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL: maximum interval (in seconds) for
-+ *	a scan plan (u32), a wiphy attribute.
-+ * @NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS: maximum number of iterations in
-+ *	a scan plan (u32), a wiphy attribute.
-+ * @NL80211_ATTR_SCHED_SCAN_PLANS: a list of scan plans for scheduled scan.
-+ *	Each scan plan defines the number of scan iterations and the interval
-+ *	between scans. The last scan plan will always run infinitely,
-+ *	thus it must not specify the number of iterations, only the interval
-+ *	between scans. The scan plans are executed sequentially.
-+ *	Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan.
-+ * @NL80211_ATTR_PBSS: flag attribute. If set it means operate
-+ *	in a PBSS. Specified in %NL80211_CMD_CONNECT to request
-+ *	connecting to a PCP, and in %NL80211_CMD_START_AP to start
-+ *	a PCP instead of AP. Relevant for DMG networks only.
-+ * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the
-+ *	BSS selection feature. When used with %NL80211_CMD_GET_WIPHY it contains
-+ *	attributes according &enum nl80211_bss_select_attr to indicate what
-+ *	BSS selection behaviours are supported. When used with %NL80211_CMD_CONNECT
-+ *	it contains the behaviour-specific attribute containing the parameters for
-+ *	BSS selection to be done by driver and/or firmware.
-+ *
-+ * @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported
-+ *	or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status
-+ *
 + * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment
 + *
 + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
@@ -148,21 +12,10 @@
   * @NUM_NL80211_ATTR: total number of nl80211_attrs available
   * @NL80211_ATTR_MAX: highest attribute number currently defined
   * @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -2130,6 +2191,21 @@ enum nl80211_attrs {
+@@ -2197,6 +2202,10 @@ enum nl80211_attrs {
  
- 	NL80211_ATTR_REG_INDOOR,
+ 	NL80211_ATTR_STA_SUPPORT_P2P_PS,
  
-+	NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS,
-+	NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL,
-+	NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS,
-+	NL80211_ATTR_SCHED_SCAN_PLANS,
-+
-+	NL80211_ATTR_PBSS,
-+
-+	NL80211_ATTR_BSS_SELECT,
-+
-+	NL80211_ATTR_STA_SUPPORT_P2P_PS,
-+
 +	NL80211_ATTR_PAD,
 +
 +	NL80211_ATTR_WIPHY_ANTENNA_GAIN,
@@ -170,47 +23,23 @@
  	/* add attributes here, update the policy in nl80211.c */
  
  	__NL80211_ATTR_AFTER_LAST,
-@@ -2273,6 +2349,20 @@ enum nl80211_sta_flags {
- 	NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
- };
- 
-+/**
-+ * enum nl80211_sta_p2p_ps_status - station support of P2P PS
-+ *
-+ * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism
-+ * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
-+ * @NUM_NL80211_P2P_PS_STATUS: number of values
-+ */
-+enum nl80211_sta_p2p_ps_status {
-+	NL80211_P2P_PS_UNSUPPORTED = 0,
-+	NL80211_P2P_PS_SUPPORTED,
-+
-+	NUM_NL80211_P2P_PS_STATUS,
-+};
-+
- #define NL80211_STA_FLAG_MAX_OLD_API	NL80211_STA_FLAG_TDLS_PEER
- 
- /**
-@@ -2430,6 +2520,9 @@ enum nl80211_sta_bss_param {
-  *	TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames;
-  *	each one of those is again nested with &enum nl80211_tid_stats
+@@ -2513,6 +2522,7 @@ enum nl80211_sta_bss_param {
   *	attributes carrying the actual values.
-+ * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames
-+ *	received from the station (u64, usec)
+  * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames
+  *	received from the station (u64, usec)
 + * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment
   * @__NL80211_STA_INFO_AFTER_LAST: internal
   * @NL80211_STA_INFO_MAX: highest possible station info attribute
   */
-@@ -2466,6 +2559,8 @@ enum nl80211_sta_info {
- 	NL80211_STA_INFO_BEACON_RX,
+@@ -2550,6 +2560,7 @@ enum nl80211_sta_info {
  	NL80211_STA_INFO_BEACON_SIGNAL_AVG,
  	NL80211_STA_INFO_TID_STATS,
-+	NL80211_STA_INFO_RX_DURATION,
+ 	NL80211_STA_INFO_RX_DURATION,
 +	NL80211_STA_INFO_PAD,
  
  	/* keep last */
  	__NL80211_STA_INFO_AFTER_LAST,
-@@ -2482,6 +2577,7 @@ enum nl80211_sta_info {
+@@ -2566,6 +2577,7 @@ enum nl80211_sta_info {
   *	transmitted MSDUs (not counting the first attempt; u64)
   * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
   *	MSDUs (u64)
@@ -218,7 +47,7 @@
   * @NUM_NL80211_TID_STATS: number of attributes here
   * @NL80211_TID_STATS_MAX: highest numbered attribute here
   */
-@@ -2491,6 +2587,7 @@ enum nl80211_tid_stats {
+@@ -2575,6 +2587,7 @@ enum nl80211_tid_stats {
  	NL80211_TID_STATS_TX_MSDU,
  	NL80211_TID_STATS_TX_MSDU_RETRIES,
  	NL80211_TID_STATS_TX_MSDU_FAILED,
@@ -226,7 +55,7 @@
  
  	/* keep last */
  	NUM_NL80211_TID_STATS,
-@@ -2927,6 +3024,7 @@ enum nl80211_user_reg_hint_type {
+@@ -3011,6 +3024,7 @@ enum nl80211_user_reg_hint_type {
   *	transmitting data (on channel or globally)
   * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
   *	(on this channel or globally)
@@ -234,7 +63,7 @@
   * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
   *	currently defined
   * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
-@@ -2942,6 +3040,7 @@ enum nl80211_survey_info {
+@@ -3026,6 +3040,7 @@ enum nl80211_survey_info {
  	NL80211_SURVEY_INFO_TIME_RX,
  	NL80211_SURVEY_INFO_TIME_TX,
  	NL80211_SURVEY_INFO_TIME_SCAN,
@@ -242,131 +71,19 @@
  
  	/* keep last */
  	__NL80211_SURVEY_INFO_AFTER_LAST,
-@@ -3364,6 +3463,10 @@ enum nl80211_bss_scan_width {
-  *	(not present if no beacon frame has been received yet)
-  * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and
-  *	@NL80211_BSS_TSF is known to be from a probe response (flag attribute)
-+ * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry
-+ *	was last updated by a received frame. The value is expected to be
-+ *	accurate to about 10ms. (u64, nanoseconds)
+@@ -3451,6 +3466,7 @@ enum nl80211_bss_scan_width {
+  * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry
+  *	was last updated by a received frame. The value is expected to be
+  *	accurate to about 10ms. (u64, nanoseconds)
 + * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment
   * @__NL80211_BSS_AFTER_LAST: internal
   * @NL80211_BSS_MAX: highest BSS attribute
   */
-@@ -3383,6 +3486,8 @@ enum nl80211_bss {
- 	NL80211_BSS_CHAN_WIDTH,
+@@ -3471,6 +3487,7 @@ enum nl80211_bss {
  	NL80211_BSS_BEACON_TSF,
  	NL80211_BSS_PRESP_DATA,
-+	NL80211_BSS_LAST_SEEN_BOOTTIME,
+ 	NL80211_BSS_LAST_SEEN_BOOTTIME,
 +	NL80211_BSS_PAD,
  
  	/* keep last */
  	__NL80211_BSS_AFTER_LAST,
-@@ -3568,11 +3673,15 @@ enum nl80211_txrate_gi {
-  * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
-  * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
-  * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz)
-+ * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace
-+ *	since newer kernel versions may support more bands
-  */
- enum nl80211_band {
- 	NL80211_BAND_2GHZ,
- 	NL80211_BAND_5GHZ,
- 	NL80211_BAND_60GHZ,
-+
-+	NUM_NL80211_BANDS,
- };
- 
- /**
-@@ -4358,12 +4467,18 @@ enum nl80211_feature_flags {
- /**
-  * enum nl80211_ext_feature_index - bit index of extended features.
-  * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates.
-+ * @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can
-+ *	can request to use RRM (see %NL80211_ATTR_USE_RRM) with
-+ *	%NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set
-+ *	the ASSOC_REQ_USE_RRM flag in the association request even if
-+ *	NL80211_FEATURE_QUIET is not advertized.
-  *
-  * @NUM_NL80211_EXT_FEATURES: number of extended features.
-  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
-  */
- enum nl80211_ext_feature_index {
- 	NL80211_EXT_FEATURE_VHT_IBSS,
-+	NL80211_EXT_FEATURE_RRM,
- 
- 	/* add new features before the definition below */
- 	NUM_NL80211_EXT_FEATURES,
-@@ -4589,4 +4704,72 @@ enum nl80211_tdls_peer_capability {
- 	NL80211_TDLS_PEER_WMM = 1<<2,
- };
- 
-+/**
-+ * enum nl80211_sched_scan_plan - scanning plan for scheduled scan
-+ * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved
-+ * @NL80211_SCHED_SCAN_PLAN_INTERVAL: interval between scan iterations. In
-+ *	seconds (u32).
-+ * @NL80211_SCHED_SCAN_PLAN_ITERATIONS: number of scan iterations in this
-+ *	scan plan (u32). The last scan plan must not specify this attribute
-+ *	because it will run infinitely. A value of zero is invalid as it will
-+ *	make the scan plan meaningless.
-+ * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number
-+ *	currently defined
-+ * @__NL80211_SCHED_SCAN_PLAN_AFTER_LAST: internal use
-+ */
-+enum nl80211_sched_scan_plan {
-+	__NL80211_SCHED_SCAN_PLAN_INVALID,
-+	NL80211_SCHED_SCAN_PLAN_INTERVAL,
-+	NL80211_SCHED_SCAN_PLAN_ITERATIONS,
-+
-+	/* keep last */
-+	__NL80211_SCHED_SCAN_PLAN_AFTER_LAST,
-+	NL80211_SCHED_SCAN_PLAN_MAX =
-+		__NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1
-+};
-+
-+/**
-+ * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters.
-+ *
-+ * @band: band of BSS that must match for RSSI value adjustment.
-+ * @delta: value used to adjust the RSSI value of matching BSS.
-+ */
-+struct nl80211_bss_select_rssi_adjust {
-+	__u8 band;
-+	__s8 delta;
-+} __attribute__((packed));
-+
-+/**
-+ * enum nl80211_bss_select_attr - attributes for bss selection.
-+ *
-+ * @__NL80211_BSS_SELECT_ATTR_INVALID: reserved.
-+ * @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection
-+ *	is requested.
-+ * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS
-+ *	selection should be done such that the specified band is preferred.
-+ *	When there are multiple BSS-es in the preferred band, the driver
-+ *	shall use RSSI-based BSS selection as a second step. The value of
-+ *	this attribute is according to &enum nl80211_band (u32).
-+ * @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for
-+ *	BSS-es in the specified band is to be adjusted before doing
-+ *	RSSI-based BSS selection. The attribute value is a packed structure
-+ *	value as specified by &struct nl80211_bss_select_rssi_adjust.
-+ * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number.
-+ * @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use.
-+ *
-+ * One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT
-+ * for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour
-+ * which the driver shall use.
-+ */
-+enum nl80211_bss_select_attr {
-+	__NL80211_BSS_SELECT_ATTR_INVALID,
-+	NL80211_BSS_SELECT_ATTR_RSSI,
-+	NL80211_BSS_SELECT_ATTR_BAND_PREF,
-+	NL80211_BSS_SELECT_ATTR_RSSI_ADJUST,
-+
-+	/* keep last */
-+	__NL80211_BSS_SELECT_ATTR_AFTER_LAST,
-+	NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1
-+};
-+
- #endif /* __LINUX_NL80211_H */