aboutsummaryrefslogtreecommitdiffstats
path: root/package
diff options
context:
space:
mode:
authorGabor Juhos <juhosg@openwrt.org>2009-01-07 18:21:53 +0000
committerGabor Juhos <juhosg@openwrt.org>2009-01-07 18:21:53 +0000
commitc5fb8c2c0543d04c6a70c7e23eb745277d819d42 (patch)
treec870dc49dae17e5586ef00a6ca4475c94fe7e9b7 /package
parent9d1109bd84896ec88e4a750106041dc080ea5dc5 (diff)
downloadupstream-c5fb8c2c0543d04c6a70c7e23eb745277d819d42.tar.gz
upstream-c5fb8c2c0543d04c6a70c7e23eb745277d819d42.tar.bz2
upstream-c5fb8c2c0543d04c6a70c7e23eb745277d819d42.zip
mac80211: oops, add missing patches
SVN-Revision: 13926
Diffstat (limited to 'package')
-rw-r--r--package/mac80211/patches/403-ath9k-introduce-bus-specific-cache-size-routine.patch85
-rw-r--r--package/mac80211/patches/404-ath9k-introduce-bus-specific-cleanup-routine.patch90
-rw-r--r--package/mac80211/patches/405-ath9k-move-PCI-code-into-separate-file.patch725
3 files changed, 900 insertions, 0 deletions
diff --git a/package/mac80211/patches/403-ath9k-introduce-bus-specific-cache-size-routine.patch b/package/mac80211/patches/403-ath9k-introduce-bus-specific-cache-size-routine.patch
new file mode 100644
index 0000000000..4fd49691a1
--- /dev/null
+++ b/package/mac80211/patches/403-ath9k-introduce-bus-specific-cache-size-routine.patch
@@ -0,0 +1,85 @@
+From 1306e6b6d72b2bc0b91bcdd15b1d982965210bda Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 5 Jan 2009 10:57:42 +0100
+Subject: [PATCH 03/11] ath9k: introduce bus specific cache size routine
+
+The PCI specific bus_read_cachesize routine won't work on the AHB bus,
+we have to replace it with a suitable one later.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+---
+ drivers/net/wireless/ath9k/core.h | 10 ++++++++++
+ drivers/net/wireless/ath9k/main.c | 9 +++++++--
+ 2 files changed, 17 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/wireless/ath9k/core.h
++++ b/drivers/net/wireless/ath9k/core.h
+@@ -693,6 +693,10 @@ enum PROT_MODE {
+ #define SC_OP_RFKILL_SW_BLOCKED BIT(12)
+ #define SC_OP_RFKILL_HW_BLOCKED BIT(13)
+
++struct ath_bus_ops {
++ void (*read_cachesize)(struct ath_softc *sc, int *csz);
++};
++
+ struct ath_softc {
+ struct ieee80211_hw *hw;
+ struct device *dev;
+@@ -743,6 +747,7 @@ struct ath_softc {
+ #ifdef CONFIG_ATH9K_DEBUG
+ struct ath9k_debug sc_debug;
+ #endif
++ struct ath_bus_ops *bus_ops;
+ };
+
+ int ath_reset(struct ath_softc *sc, bool retry_tx);
+@@ -750,4 +755,9 @@ int ath_get_hal_qnum(u16 queue, struct a
+ int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc);
+ int ath_cabq_update(struct ath_softc *);
+
++static inline void ath_read_cachesize(struct ath_softc *sc, int *csz)
++{
++ sc->bus_ops->read_cachesize(sc, csz);
++}
++
+ #endif /* CORE_H */
+--- a/drivers/net/wireless/ath9k/main.c
++++ b/drivers/net/wireless/ath9k/main.c
+@@ -42,7 +42,7 @@ static void ath_detach(struct ath_softc
+
+ /* return bus cachesize in 4B word units */
+
+-static void bus_read_cachesize(struct ath_softc *sc, int *csz)
++static void ath_pci_read_cachesize(struct ath_softc *sc, int *csz)
+ {
+ u8 u8tmp;
+
+@@ -1338,7 +1338,7 @@ static int ath_init(u16 devid, struct at
+ * Cache line size is used to size and align various
+ * structures used to communicate with the hardware.
+ */
+- bus_read_cachesize(sc, &csz);
++ ath_read_cachesize(sc, &csz);
+ /* XXX assert csz is non-zero */
+ sc->sc_cachelsz = csz << 2; /* convert to bytes */
+
+@@ -2529,6 +2529,10 @@ ath_rf_name(u16 rf_version)
+ return "????";
+ }
+
++static struct ath_bus_ops ath_pci_bus_ops = {
++ .read_cachesize = ath_pci_read_cachesize,
++};
++
+ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+ {
+ void __iomem *mem;
+@@ -2617,6 +2621,7 @@ static int ath_pci_probe(struct pci_dev
+ sc->hw = hw;
+ sc->dev = &pdev->dev;
+ sc->mem = mem;
++ sc->bus_ops = &ath_pci_bus_ops;
+
+ if (ath_attach(id->device, sc) != 0) {
+ ret = -ENODEV;
diff --git a/package/mac80211/patches/404-ath9k-introduce-bus-specific-cleanup-routine.patch b/package/mac80211/patches/404-ath9k-introduce-bus-specific-cleanup-routine.patch
new file mode 100644
index 0000000000..d1b2f3c1f9
--- /dev/null
+++ b/package/mac80211/patches/404-ath9k-introduce-bus-specific-cleanup-routine.patch
@@ -0,0 +1,90 @@
+From 4167fb37cceda6a5ebfbfc4431abc69a1857ce43 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 5 Jan 2009 10:59:29 +0100
+Subject: [PATCH 04/11] ath9k: introduce bus specific cleanup routine
+
+We have left only some PCI specific cleanup code. We have to convert
+them as well.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+---
+ drivers/net/wireless/ath9k/core.h | 6 ++++++
+ drivers/net/wireless/ath9k/main.c | 30 ++++++++++++++++--------------
+ 2 files changed, 22 insertions(+), 14 deletions(-)
+
+--- a/drivers/net/wireless/ath9k/core.h
++++ b/drivers/net/wireless/ath9k/core.h
+@@ -695,6 +695,7 @@ enum PROT_MODE {
+
+ struct ath_bus_ops {
+ void (*read_cachesize)(struct ath_softc *sc, int *csz);
++ void (*cleanup)(struct ath_softc *sc);
+ };
+
+ struct ath_softc {
+@@ -760,4 +761,9 @@ static inline void ath_read_cachesize(st
+ sc->bus_ops->read_cachesize(sc, csz);
+ }
+
++static inline void ath_bus_cleanup(struct ath_softc *sc)
++{
++ sc->bus_ops->cleanup(sc);
++}
++
+ #endif /* CORE_H */
+--- a/drivers/net/wireless/ath9k/main.c
++++ b/drivers/net/wireless/ath9k/main.c
+@@ -1267,13 +1267,7 @@ static int ath_start_rfkill_poll(struct
+ rfkill_free(sc->rf_kill.rfkill);
+
+ /* Deinitialize the device */
+- ath_detach(sc);
+- if (to_pci_dev(sc->dev)->irq)
+- free_irq(to_pci_dev(sc->dev)->irq, sc);
+- pci_iounmap(to_pci_dev(sc->dev), sc->mem);
+- pci_release_region(to_pci_dev(sc->dev), 0);
+- pci_disable_device(to_pci_dev(sc->dev));
+- ieee80211_free_hw(sc->hw);
++ ath_bus_cleanup(sc);
+ return -EIO;
+ } else {
+ sc->sc_flags |= SC_OP_RFKILL_REGISTERED;
+@@ -2529,8 +2523,22 @@ ath_rf_name(u16 rf_version)
+ return "????";
+ }
+
++static void ath_pci_cleanup(struct ath_softc *sc)
++{
++ struct pci_dev *pdev = to_pci_dev(sc->dev);
++
++ ath_detach(sc);
++ if (pdev->irq)
++ free_irq(pdev->irq, sc);
++ pci_iounmap(pdev, sc->mem);
++ pci_release_region(pdev, 0);
++ pci_disable_device(pdev);
++ ieee80211_free_hw(sc->hw);
++}
++
+ static struct ath_bus_ops ath_pci_bus_ops = {
+ .read_cachesize = ath_pci_read_cachesize,
++ .cleanup = ath_pci_cleanup,
+ };
+
+ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+@@ -2667,13 +2675,7 @@ static void ath_pci_remove(struct pci_de
+ struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+ struct ath_softc *sc = hw->priv;
+
+- ath_detach(sc);
+- if (pdev->irq)
+- free_irq(pdev->irq, sc);
+- pci_iounmap(pdev, sc->mem);
+- pci_release_region(pdev, 0);
+- pci_disable_device(pdev);
+- ieee80211_free_hw(hw);
++ ath_pci_cleanup(sc);
+ }
+
+ #ifdef CONFIG_PM
diff --git a/package/mac80211/patches/405-ath9k-move-PCI-code-into-separate-file.patch b/package/mac80211/patches/405-ath9k-move-PCI-code-into-separate-file.patch
new file mode 100644
index 0000000000..0cdf4daf54
--- /dev/null
+++ b/package/mac80211/patches/405-ath9k-move-PCI-code-into-separate-file.patch
@@ -0,0 +1,725 @@
+From d95e670cd1395ffd8410bed809b6d060f2183d6b Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 5 Jan 2009 11:01:09 +0100
+Subject: [PATCH 05/11] ath9k: move PCI code into separate file
+
+Now that we have converted all bus specific routines to replaceable, we
+can move the PCI specific codes into a separate file.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+---
+ drivers/net/wireless/ath9k/Makefile | 1 +
+ drivers/net/wireless/ath9k/core.h | 18 ++-
+ drivers/net/wireless/ath9k/main.c | 299 +++--------------------------------
+ drivers/net/wireless/ath9k/pci.c | 289 +++++++++++++++++++++++++++++++++
+ 4 files changed, 328 insertions(+), 279 deletions(-)
+
+--- a/drivers/net/wireless/ath9k/Makefile
++++ b/drivers/net/wireless/ath9k/Makefile
+@@ -11,6 +11,7 @@ ath9k-y += hw.o \
+ xmit.o \
+ rc.o
+
++ath9k-$(CONFIG_PCI) += pci.o
+ ath9k-$(CONFIG_ATH9K_DEBUG) += debug.o
+
+ obj-$(CONFIG_ATH9K) += ath9k.o
+--- a/drivers/net/wireless/ath9k/core.h
++++ b/drivers/net/wireless/ath9k/core.h
+@@ -18,7 +18,7 @@
+ #define CORE_H
+
+ #include <linux/etherdevice.h>
+-#include <linux/pci.h>
++#include <linux/device.h>
+ #include <net/mac80211.h>
+ #include <linux/leds.h>
+ #include <linux/rfkill.h>
+@@ -766,4 +766,20 @@ static inline void ath_bus_cleanup(struc
+ sc->bus_ops->cleanup(sc);
+ }
+
++extern struct ieee80211_ops ath9k_ops;
++
++irqreturn_t ath_isr(int irq, void *dev);
++int ath_attach(u16 devid, struct ath_softc *sc);
++void ath_detach(struct ath_softc *sc);
++const char *ath_mac_bb_name(u32 mac_bb_version);
++const char *ath_rf_name(u16 rf_version);
++
++#ifdef CONFIG_PCI
++int ath_pci_init(void);
++void ath_pci_exit(void);
++#else
++static inline int ath_pci_init(void) { return 0; };
++static inline void ath_pci_exit(void) {};
++#endif
++
+ #endif /* CORE_H */
+--- a/drivers/net/wireless/ath9k/main.c
++++ b/drivers/net/wireless/ath9k/main.c
+@@ -28,38 +28,6 @@ MODULE_DESCRIPTION("Support for Atheros
+ MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards");
+ MODULE_LICENSE("Dual BSD/GPL");
+
+-static struct pci_device_id ath_pci_id_table[] __devinitdata = {
+- { PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI */
+- { PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
+- { PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */
+- { PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */
+- { PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
+- { PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */
+- { 0 }
+-};
+-
+-static void ath_detach(struct ath_softc *sc);
+-
+-/* return bus cachesize in 4B word units */
+-
+-static void ath_pci_read_cachesize(struct ath_softc *sc, int *csz)
+-{
+- u8 u8tmp;
+-
+- pci_read_config_byte(to_pci_dev(sc->dev), PCI_CACHE_LINE_SIZE,
+- (u8 *)&u8tmp);
+- *csz = (int)u8tmp;
+-
+- /*
+- * This check was put in to avoid "unplesant" consequences if
+- * the bootrom has not fully initialized all PCI devices.
+- * Sometimes the cache line size register is not set
+- */
+-
+- if (*csz == 0)
+- *csz = DEFAULT_CACHELINE >> 2; /* Use the default size */
+-}
+-
+ static void ath_cache_conf_rate(struct ath_softc *sc,
+ struct ieee80211_conf *conf)
+ {
+@@ -497,7 +465,7 @@ static void ath9k_tasklet(unsigned long
+ ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask);
+ }
+
+-static irqreturn_t ath_isr(int irq, void *dev)
++irqreturn_t ath_isr(int irq, void *dev)
+ {
+ struct ath_softc *sc = dev;
+ struct ath_hal *ah = sc->sc_ah;
+@@ -1278,7 +1246,7 @@ static int ath_start_rfkill_poll(struct
+ }
+ #endif /* CONFIG_RFKILL */
+
+-static void ath_detach(struct ath_softc *sc)
++void ath_detach(struct ath_softc *sc)
+ {
+ struct ieee80211_hw *hw = sc->hw;
+ int i = 0;
+@@ -1529,7 +1497,7 @@ bad:
+ return error;
+ }
+
+-static int ath_attach(u16 devid, struct ath_softc *sc)
++int ath_attach(u16 devid, struct ath_softc *sc)
+ {
+ struct ieee80211_hw *hw = sc->hw;
+ int error = 0;
+@@ -2448,7 +2416,7 @@ static int ath9k_ampdu_action(struct iee
+ return ret;
+ }
+
+-static struct ieee80211_ops ath9k_ops = {
++struct ieee80211_ops ath9k_ops = {
+ .tx = ath9k_tx,
+ .start = ath9k_start,
+ .stop = ath9k_stop,
+@@ -2492,7 +2460,7 @@ static struct {
+ /*
+ * Return the MAC/BB name. "????" is returned if the MAC/BB is unknown.
+ */
+-static const char *
++const char *
+ ath_mac_bb_name(u32 mac_bb_version)
+ {
+ int i;
+@@ -2509,7 +2477,7 @@ ath_mac_bb_name(u32 mac_bb_version)
+ /*
+ * Return the RF name. "????" is returned if the RF is unknown.
+ */
+-static const char *
++const char *
+ ath_rf_name(u16 rf_version)
+ {
+ int i;
+@@ -2523,236 +2491,7 @@ ath_rf_name(u16 rf_version)
+ return "????";
+ }
+
+-static void ath_pci_cleanup(struct ath_softc *sc)
+-{
+- struct pci_dev *pdev = to_pci_dev(sc->dev);
+-
+- ath_detach(sc);
+- if (pdev->irq)
+- free_irq(pdev->irq, sc);
+- pci_iounmap(pdev, sc->mem);
+- pci_release_region(pdev, 0);
+- pci_disable_device(pdev);
+- ieee80211_free_hw(sc->hw);
+-}
+-
+-static struct ath_bus_ops ath_pci_bus_ops = {
+- .read_cachesize = ath_pci_read_cachesize,
+- .cleanup = ath_pci_cleanup,
+-};
+-
+-static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+-{
+- void __iomem *mem;
+- struct ath_softc *sc;
+- struct ieee80211_hw *hw;
+- u8 csz;
+- u32 val;
+- int ret = 0;
+- struct ath_hal *ah;
+-
+- if (pci_enable_device(pdev))
+- return -EIO;
+-
+- ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+-
+- if (ret) {
+- printk(KERN_ERR "ath9k: 32-bit DMA not available\n");
+- goto bad;
+- }
+-
+- ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+-
+- if (ret) {
+- printk(KERN_ERR "ath9k: 32-bit DMA consistent "
+- "DMA enable failed\n");
+- goto bad;
+- }
+-
+- /*
+- * Cache line size is used to size and align various
+- * structures used to communicate with the hardware.
+- */
+- pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
+- if (csz == 0) {
+- /*
+- * Linux 2.4.18 (at least) writes the cache line size
+- * register as a 16-bit wide register which is wrong.
+- * We must have this setup properly for rx buffer
+- * DMA to work so force a reasonable value here if it
+- * comes up zero.
+- */
+- csz = L1_CACHE_BYTES / sizeof(u32);
+- pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
+- }
+- /*
+- * The default setting of latency timer yields poor results,
+- * set it to the value used by other systems. It may be worth
+- * tweaking this setting more.
+- */
+- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
+-
+- pci_set_master(pdev);
+-
+- /*
+- * Disable the RETRY_TIMEOUT register (0x41) to keep
+- * PCI Tx retries from interfering with C3 CPU state.
+- */
+- pci_read_config_dword(pdev, 0x40, &val);
+- if ((val & 0x0000ff00) != 0)
+- pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+-
+- ret = pci_request_region(pdev, 0, "ath9k");
+- if (ret) {
+- dev_err(&pdev->dev, "PCI memory region reserve error\n");
+- ret = -ENODEV;
+- goto bad;
+- }
+-
+- mem = pci_iomap(pdev, 0, 0);
+- if (!mem) {
+- printk(KERN_ERR "PCI memory map error\n") ;
+- ret = -EIO;
+- goto bad1;
+- }
+-
+- hw = ieee80211_alloc_hw(sizeof(struct ath_softc), &ath9k_ops);
+- if (hw == NULL) {
+- printk(KERN_ERR "ath_pci: no memory for ieee80211_hw\n");
+- goto bad2;
+- }
+-
+- SET_IEEE80211_DEV(hw, &pdev->dev);
+- pci_set_drvdata(pdev, hw);
+-
+- sc = hw->priv;
+- sc->hw = hw;
+- sc->dev = &pdev->dev;
+- sc->mem = mem;
+- sc->bus_ops = &ath_pci_bus_ops;
+-
+- if (ath_attach(id->device, sc) != 0) {
+- ret = -ENODEV;
+- goto bad3;
+- }
+-
+- /* setup interrupt service routine */
+-
+- if (request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath", sc)) {
+- printk(KERN_ERR "%s: request_irq failed\n",
+- wiphy_name(hw->wiphy));
+- ret = -EIO;
+- goto bad4;
+- }
+-
+- ah = sc->sc_ah;
+- printk(KERN_INFO
+- "%s: Atheros AR%s MAC/BB Rev:%x "
+- "AR%s RF Rev:%x: mem=0x%lx, irq=%d\n",
+- wiphy_name(hw->wiphy),
+- ath_mac_bb_name(ah->ah_macVersion),
+- ah->ah_macRev,
+- ath_rf_name((ah->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR)),
+- ah->ah_phyRev,
+- (unsigned long)mem, pdev->irq);
+-
+- return 0;
+-bad4:
+- ath_detach(sc);
+-bad3:
+- ieee80211_free_hw(hw);
+-bad2:
+- pci_iounmap(pdev, mem);
+-bad1:
+- pci_release_region(pdev, 0);
+-bad:
+- pci_disable_device(pdev);
+- return ret;
+-}
+-
+-static void ath_pci_remove(struct pci_dev *pdev)
+-{
+- struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+- struct ath_softc *sc = hw->priv;
+-
+- ath_pci_cleanup(sc);
+-}
+-
+-#ifdef CONFIG_PM
+-
+-static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+-{
+- struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+- struct ath_softc *sc = hw->priv;
+-
+- ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
+-
+-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
+- if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
+- cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll);
+-#endif
+-
+- pci_save_state(pdev);
+- pci_disable_device(pdev);
+- pci_set_power_state(pdev, 3);
+-
+- return 0;
+-}
+-
+-static int ath_pci_resume(struct pci_dev *pdev)
+-{
+- struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+- struct ath_softc *sc = hw->priv;
+- u32 val;
+- int err;
+-
+- err = pci_enable_device(pdev);
+- if (err)
+- return err;
+- pci_restore_state(pdev);
+- /*
+- * Suspend/Resume resets the PCI configuration space, so we have to
+- * re-disable the RETRY_TIMEOUT register (0x41) to keep
+- * PCI Tx retries from interfering with C3 CPU state
+- */
+- pci_read_config_dword(pdev, 0x40, &val);
+- if ((val & 0x0000ff00) != 0)
+- pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+-
+- /* Enable LED */
+- ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
+- AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+- ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
+-
+-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
+- /*
+- * check the h/w rfkill state on resume
+- * and start the rfkill poll timer
+- */
+- if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
+- queue_delayed_work(sc->hw->workqueue,
+- &sc->rf_kill.rfkill_poll, 0);
+-#endif
+-
+- return 0;
+-}
+-
+-#endif /* CONFIG_PM */
+-
+-MODULE_DEVICE_TABLE(pci, ath_pci_id_table);
+-
+-static struct pci_driver ath_pci_driver = {
+- .name = "ath9k",
+- .id_table = ath_pci_id_table,
+- .probe = ath_pci_probe,
+- .remove = ath_pci_remove,
+-#ifdef CONFIG_PM
+- .suspend = ath_pci_suspend,
+- .resume = ath_pci_resume,
+-#endif /* CONFIG_PM */
+-};
+-
+-static int __init init_ath_pci(void)
++static int __init ath9k_init(void)
+ {
+ int error;
+
+@@ -2764,26 +2503,30 @@ static int __init init_ath_pci(void)
+ printk(KERN_ERR
+ "Unable to register rate control algorithm: %d\n",
+ error);
+- ath_rate_control_unregister();
+- return error;
++ goto err_out;
+ }
+
+- if (pci_register_driver(&ath_pci_driver) < 0) {
++ error = ath_pci_init();
++ if (error < 0) {
+ printk(KERN_ERR
+ "ath_pci: No devices found, driver not installed.\n");
+- ath_rate_control_unregister();
+- pci_unregister_driver(&ath_pci_driver);
+- return -ENODEV;
++ error = -ENODEV;
++ goto err_rate_unregister;
+ }
+
+ return 0;
++
++ err_rate_unregister:
++ ath_rate_control_unregister();
++ err_out:
++ return error;
+ }
+-module_init(init_ath_pci);
++module_init(ath9k_init);
+
+-static void __exit exit_ath_pci(void)
++static void __exit ath9k_exit(void)
+ {
++ ath_pci_exit();
+ ath_rate_control_unregister();
+- pci_unregister_driver(&ath_pci_driver);
+ printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
+ }
+-module_exit(exit_ath_pci);
++module_exit(ath9k_exit);
+--- /dev/null
++++ b/drivers/net/wireless/ath9k/pci.c
+@@ -0,0 +1,289 @@
++/*
++ * Copyright (c) 2008 Atheros Communications Inc.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++
++#include <linux/nl80211.h>
++#include <linux/pci.h>
++#include "core.h"
++#include "reg.h"
++#include "hw.h"
++
++static struct pci_device_id ath_pci_id_table[] __devinitdata = {
++ { PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI */
++ { PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
++ { PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */
++ { PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */
++ { PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
++ { PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */
++ { 0 }
++};
++
++/* return bus cachesize in 4B word units */
++static void ath_pci_read_cachesize(struct ath_softc *sc, int *csz)
++{
++ u8 u8tmp;
++
++ pci_read_config_byte(to_pci_dev(sc->dev), PCI_CACHE_LINE_SIZE,
++ (u8 *)&u8tmp);
++ *csz = (int)u8tmp;
++
++ /*
++ * This check was put in to avoid "unplesant" consequences if
++ * the bootrom has not fully initialized all PCI devices.
++ * Sometimes the cache line size register is not set
++ */
++
++ if (*csz == 0)
++ *csz = DEFAULT_CACHELINE >> 2; /* Use the default size */
++}
++
++static void ath_pci_cleanup(struct ath_softc *sc)
++{
++ struct pci_dev *pdev = to_pci_dev(sc->dev);
++
++ ath_detach(sc);
++ if (pdev->irq)
++ free_irq(pdev->irq, sc);
++ pci_iounmap(pdev, sc->mem);
++ pci_release_region(pdev, 0);
++ pci_disable_device(pdev);
++ ieee80211_free_hw(sc->hw);
++}
++
++static struct ath_bus_ops ath_pci_bus_ops = {
++ .read_cachesize = ath_pci_read_cachesize,
++ .cleanup = ath_pci_cleanup,
++};
++
++static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
++{
++ void __iomem *mem;
++ struct ath_softc *sc;
++ struct ieee80211_hw *hw;
++ u8 csz;
++ u32 val;
++ int ret = 0;
++ struct ath_hal *ah;
++
++ if (pci_enable_device(pdev))
++ return -EIO;
++
++ ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
++
++ if (ret) {
++ printk(KERN_ERR "ath9k: 32-bit DMA not available\n");
++ goto bad;
++ }
++
++ ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
++
++ if (ret) {
++ printk(KERN_ERR "ath9k: 32-bit DMA consistent "
++ "DMA enable failed\n");
++ goto bad;
++ }
++
++ /*
++ * Cache line size is used to size and align various
++ * structures used to communicate with the hardware.
++ */
++ pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
++ if (csz == 0) {
++ /*
++ * Linux 2.4.18 (at least) writes the cache line size
++ * register as a 16-bit wide register which is wrong.
++ * We must have this setup properly for rx buffer
++ * DMA to work so force a reasonable value here if it
++ * comes up zero.
++ */
++ csz = L1_CACHE_BYTES / sizeof(u32);
++ pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
++ }
++ /*
++ * The default setting of latency timer yields poor results,
++ * set it to the value used by other systems. It may be worth
++ * tweaking this setting more.
++ */
++ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
++
++ pci_set_master(pdev);
++
++ /*
++ * Disable the RETRY_TIMEOUT register (0x41) to keep
++ * PCI Tx retries from interfering with C3 CPU state.
++ */
++ pci_read_config_dword(pdev, 0x40, &val);
++ if ((val & 0x0000ff00) != 0)
++ pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
++
++ ret = pci_request_region(pdev, 0, "ath9k");
++ if (ret) {
++ dev_err(&pdev->dev, "PCI memory region reserve error\n");
++ ret = -ENODEV;
++ goto bad;
++ }
++
++ mem = pci_iomap(pdev, 0, 0);
++ if (!mem) {
++ printk(KERN_ERR "PCI memory map error\n") ;
++ ret = -EIO;
++ goto bad1;
++ }
++
++ hw = ieee80211_alloc_hw(sizeof(struct ath_softc), &ath9k_ops);
++ if (hw == NULL) {
++ printk(KERN_ERR "ath_pci: no memory for ieee80211_hw\n");
++ goto bad2;
++ }
++
++ SET_IEEE80211_DEV(hw, &pdev->dev);
++ pci_set_drvdata(pdev, hw);
++
++ sc = hw->priv;
++ sc->hw = hw;
++ sc->dev = &pdev->dev;
++ sc->mem = mem;
++ sc->bus_ops = &ath_pci_bus_ops;
++
++ if (ath_attach(id->device, sc) != 0) {
++ ret = -ENODEV;
++ goto bad3;
++ }
++
++ /* setup interrupt service routine */
++
++ if (request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath", sc)) {
++ printk(KERN_ERR "%s: request_irq failed\n",
++ wiphy_name(hw->wiphy));
++ ret = -EIO;
++ goto bad4;
++ }
++
++ ah = sc->sc_ah;
++ printk(KERN_INFO
++ "%s: Atheros AR%s MAC/BB Rev:%x "
++ "AR%s RF Rev:%x: mem=0x%lx, irq=%d\n",
++ wiphy_name(hw->wiphy),
++ ath_mac_bb_name(ah->ah_macVersion),
++ ah->ah_macRev,
++ ath_rf_name((ah->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR)),
++ ah->ah_phyRev,
++ (unsigned long)mem, pdev->irq);
++
++ return 0;
++bad4:
++ ath_detach(sc);
++bad3:
++ ieee80211_free_hw(hw);
++bad2:
++ pci_iounmap(pdev, mem);
++bad1:
++ pci_release_region(pdev, 0);
++bad:
++ pci_disable_device(pdev);
++ return ret;
++}
++
++static void ath_pci_remove(struct pci_dev *pdev)
++{
++ struct ieee80211_hw *hw = pci_get_drvdata(pdev);
++ struct ath_softc *sc = hw->priv;
++
++ ath_pci_cleanup(sc);
++}
++
++#ifdef CONFIG_PM
++
++static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state)
++{
++ struct ieee80211_hw *hw = pci_get_drvdata(pdev);
++ struct ath_softc *sc = hw->priv;
++
++ ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
++
++#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
++ if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
++ cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll);
++#endif
++
++ pci_save_state(pdev);
++ pci_disable_device(pdev);
++ pci_set_power_state(pdev, 3);
++
++ return 0;
++}
++
++static int ath_pci_resume(struct pci_dev *pdev)
++{
++ struct ieee80211_hw *hw = pci_get_drvdata(pdev);
++ struct ath_softc *sc = hw->priv;
++ u32 val;
++ int err;
++
++ err = pci_enable_device(pdev);
++ if (err)
++ return err;
++ pci_restore_state(pdev);
++ /*
++ * Suspend/Resume resets the PCI configuration space, so we have to
++ * re-disable the RETRY_TIMEOUT register (0x41) to keep
++ * PCI Tx retries from interfering with C3 CPU state
++ */
++ pci_read_config_dword(pdev, 0x40, &val);
++ if ((val & 0x0000ff00) != 0)
++ pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
++
++ /* Enable LED */
++ ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
++ AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
++ ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
++
++#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
++ /*
++ * check the h/w rfkill state on resume
++ * and start the rfkill poll timer
++ */
++ if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
++ queue_delayed_work(sc->hw->workqueue,
++ &sc->rf_kill.rfkill_poll, 0);
++#endif
++
++ return 0;
++}
++
++#endif /* CONFIG_PM */
++
++MODULE_DEVICE_TABLE(pci, ath_pci_id_table);
++
++static struct pci_driver ath_pci_driver = {
++ .name = "ath9k",
++ .id_table = ath_pci_id_table,
++ .probe = ath_pci_probe,
++ .remove = ath_pci_remove,
++#ifdef CONFIG_PM
++ .suspend = ath_pci_suspend,
++ .resume = ath_pci_resume,
++#endif /* CONFIG_PM */
++};
++
++int __init ath_pci_init(void)
++{
++ return pci_register_driver(&ath_pci_driver);
++}
++
++void ath_pci_exit(void)
++{
++ pci_unregister_driver(&ath_pci_driver);
++}