aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/apm821xx
diff options
context:
space:
mode:
authorChris Blake <chrisrblake93@gmail.com>2016-11-16 09:38:07 -0600
committerJohn Crispin <john@phrozen.org>2016-11-21 10:14:15 +0100
commitf478ec2007b93b87fba606eae49688753281c85f (patch)
tree54ec46f17f0f3fdcb3bc6fb9516c271c8c38c460 /target/linux/apm821xx
parent68634426fee42803b4be956ef3ac262dee6f8384 (diff)
downloadupstream-f478ec2007b93b87fba606eae49688753281c85f.tar.gz
upstream-f478ec2007b93b87fba606eae49688753281c85f.tar.bz2
upstream-f478ec2007b93b87fba606eae49688753281c85f.zip
apm821xx: Add support for the Cisco Meraki MX60/MX60W
This patch adds support for the Cisco Meraki MX60/MX60W Security Appliance. Flashing information can be found at https://github.com/riptidewave93/LEDE-MX60 Specs are as follows: AppliedMicro APM82181 SoC at 800MHz 1GiB NAND - Samsung K9K8G08U0D 512MB DDR RAM - 4x Nanya NT5TU128M8GE-AC Atheros AR8327-BL1A Gigabit Ethernet Switch 1x USB 2.0 Port More info can be found at https://wiki.openwrt.org/toh/meraki/mx60 Cc: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
Diffstat (limited to 'target/linux/apm821xx')
-rwxr-xr-xtarget/linux/apm821xx/base-files/etc/board.d/01_leds8
-rwxr-xr-xtarget/linux/apm821xx/base-files/etc/board.d/02_network3
-rwxr-xr-xtarget/linux/apm821xx/base-files/etc/diag.sh15
-rwxr-xr-xtarget/linux/apm821xx/base-files/lib/apm821xx.sh4
-rw-r--r--target/linux/apm821xx/base-files/lib/preinit/05_set_iface_mac_apm821xx3
-rwxr-xr-xtarget/linux/apm821xx/base-files/lib/upgrade/merakinand.sh9
-rwxr-xr-xtarget/linux/apm821xx/base-files/lib/upgrade/platform.sh6
-rw-r--r--target/linux/apm821xx/config-4.41
-rw-r--r--target/linux/apm821xx/dts/MX60.dts186
-rw-r--r--target/linux/apm821xx/image/Makefile32
-rw-r--r--target/linux/apm821xx/patches-4.4/203-add-meraki-mx60-buckminster-support.patch32
11 files changed, 283 insertions, 16 deletions
diff --git a/target/linux/apm821xx/base-files/etc/board.d/01_leds b/target/linux/apm821xx/base-files/etc/board.d/01_leds
index 38cfbdcd7a..ad9bef9c09 100755
--- a/target/linux/apm821xx/base-files/etc/board.d/01_leds
+++ b/target/linux/apm821xx/base-files/etc/board.d/01_leds
@@ -16,6 +16,14 @@ mr24)
ucidef_set_led_wlan "wlan4" "WLAN4" "mr24:green:wifi4" "phy0tpt"
;;
+mx60)
+ ucidef_set_led_switch "wan" "WAN" "mx60:green:wan" "switch0" "0x20"
+ ucidef_set_led_switch "lan1" "LAN1" "mx60:green:lan1" "switch0" "0x10"
+ ucidef_set_led_switch "lan2" "LAN2" "mx60:green:lan2" "switch0" "0x08"
+ ucidef_set_led_switch "lan3" "LAN3" "mx60:green:lan3" "switch0" "0x04"
+ ucidef_set_led_switch "lan4" "LAN4" "mx60:green:lan4" "switch0" "0x02"
+ ;;
+
mbl)
ucidef_set_led_ide "sata" "SATA" "mbl:blue:power"
;;
diff --git a/target/linux/apm821xx/base-files/etc/board.d/02_network b/target/linux/apm821xx/base-files/etc/board.d/02_network
index 3a25709a2a..90a8c1a8d2 100755
--- a/target/linux/apm821xx/base-files/etc/board.d/02_network
+++ b/target/linux/apm821xx/base-files/etc/board.d/02_network
@@ -9,11 +9,12 @@ board_config_update
board=$(apm821xx_board_name)
case "$board" in
-mbl | \
+mbl|\
mr24)
ucidef_set_interface_lan "eth0"
;;
+mx60|\
wndr4700)
ucidef_add_switch "switch0" \
"0@eth0" "4:lan" "3:lan" "2:lan" "1:lan" "5:wan"
diff --git a/target/linux/apm821xx/base-files/etc/diag.sh b/target/linux/apm821xx/base-files/etc/diag.sh
index 3ddd21d844..3e480f1fe4 100755
--- a/target/linux/apm821xx/base-files/etc/diag.sh
+++ b/target/linux/apm821xx/base-files/etc/diag.sh
@@ -4,17 +4,14 @@
. /lib/apm821xx.sh
get_status_led() {
- case $(apm821xx_board_name) in
- mbl)
- status_led="mbl:green:power"
- ;;
-
- mr24)
- status_led="mr24:green:power"
- ;;
+ local board=$(apm821xx_board_name)
+ case $board in
+ mbl|\
+ mr24|\
+ mx60|\
wndr4700)
- status_led="wndr4700:green:power"
+ status_led="$board:green:power"
;;
*)
diff --git a/target/linux/apm821xx/base-files/lib/apm821xx.sh b/target/linux/apm821xx/base-files/lib/apm821xx.sh
index 78fe452184..98f6ee92ab 100755
--- a/target/linux/apm821xx/base-files/lib/apm821xx.sh
+++ b/target/linux/apm821xx/base-files/lib/apm821xx.sh
@@ -14,6 +14,10 @@ apm821xx_board_detect() {
name="mr24"
;;
+ *"Meraki MX60/MX60W Security Appliance")
+ name="mx60"
+ ;;
+
*"MyBook Live"*)
name="mbl"
;;
diff --git a/target/linux/apm821xx/base-files/lib/preinit/05_set_iface_mac_apm821xx b/target/linux/apm821xx/base-files/lib/preinit/05_set_iface_mac_apm821xx
index 5dc7175730..750af042e1 100644
--- a/target/linux/apm821xx/base-files/lib/preinit/05_set_iface_mac_apm821xx
+++ b/target/linux/apm821xx/base-files/lib/preinit/05_set_iface_mac_apm821xx
@@ -4,7 +4,8 @@
preinit_set_mac_address() {
case $(apm821xx_board_name) in
- mr24)
+ mr24|\
+ mx60)
mac_lan=$(mtd_get_mac_binary_ubi board-config 102)
[ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan"
;;
diff --git a/target/linux/apm821xx/base-files/lib/upgrade/merakinand.sh b/target/linux/apm821xx/base-files/lib/upgrade/merakinand.sh
index 5861d97f12..f025082e76 100755
--- a/target/linux/apm821xx/base-files/lib/upgrade/merakinand.sh
+++ b/target/linux/apm821xx/base-files/lib/upgrade/merakinand.sh
@@ -15,7 +15,8 @@ merakinand_do_kernel_check() {
# What is our kernel magic string?
case "$board_name" in
- "mr24")
+ "mr24"|\
+ "mx60")
[ "$image_magic_word" == "8e73ed8a" ] && {
echo "pass" && return 0
}
@@ -33,7 +34,8 @@ merakinand_do_platform_check() {
local kernel_magic="$(merakinand_do_kernel_check $1 $2)"
case "$board_name" in
- "mr24")
+ "mr24"|\
+ "mx60")
[ "$control_length" = 0 -o "$file_type" != "squashfs" -o "$kernel_magic" != "pass" ] && {
echo "Invalid sysupgrade file for $board_name"
return 1
@@ -54,7 +56,8 @@ merakinand_do_upgrade() {
# Do we need to do any platform tweaks?
case "$board_name" in
- "mr24")
+ "mr24"|\
+ "mx60")
nand_do_upgrade $1
;;
*)
diff --git a/target/linux/apm821xx/base-files/lib/upgrade/platform.sh b/target/linux/apm821xx/base-files/lib/upgrade/platform.sh
index 5559767a26..ca6aa8d4be 100755
--- a/target/linux/apm821xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/apm821xx/base-files/lib/upgrade/platform.sh
@@ -16,7 +16,8 @@ platform_check_image() {
return $?;
;;
- mr24)
+ mr24|\
+ mx60)
merakinand_do_platform_check $board "$1"
return $?;
;;
@@ -38,7 +39,8 @@ platform_pre_upgrade() {
local board=$(apm821xx_board_name)
case "$board" in
- mr24)
+ mr24|\
+ mx60)
merakinand_do_upgrade "$1"
;;
diff --git a/target/linux/apm821xx/config-4.4 b/target/linux/apm821xx/config-4.4
index 1515dda73b..797cdaeb82 100644
--- a/target/linux/apm821xx/config-4.4
+++ b/target/linux/apm821xx/config-4.4
@@ -35,6 +35,7 @@ CONFIG_AUDIT_ARCH=y
# CONFIG_BAMBOO is not set
CONFIG_BCH=y
# CONFIG_BLUESTONE is not set
+CONFIG_BUCKMINSTER=y
CONFIG_BOOKE=y
CONFIG_BOOKE_WDT=y
CONFIG_BOUNCE=y
diff --git a/target/linux/apm821xx/dts/MX60.dts b/target/linux/apm821xx/dts/MX60.dts
new file mode 100644
index 0000000000..4ec0043f32
--- /dev/null
+++ b/target/linux/apm821xx/dts/MX60.dts
@@ -0,0 +1,186 @@
+/*
+ * Device Tree Source for Meraki MX60/MX60W (Buckminster)
+ *
+ * Copyright (C) 2016 Chris Blake <chrisrblake93@gmail.com>
+ *
+ * Based on Cisco Meraki DTS extracted from release wired-12-217818
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "apm82181.dtsi"
+
+/ {
+ model = "Meraki MX60/MX60W Security Appliance";
+ compatible = "meraki,buckminster";
+
+ aliases {
+ serial0 = &UART1;
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@ef600400";
+ };
+
+};
+
+&CRYPTO {
+ status = "okay";
+};
+
+&PKA {
+ status = "okay";
+};
+
+&TRNG {
+ status = "okay";
+};
+
+&USBOTG0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&EBC0 {
+ /* Buckminster has 1GiB of NAND */
+ ndfc@1,0 {
+ status = "okay";
+ nand {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x00100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot-env";
+ reg = <0x00100000 0x00100000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "oops";
+ reg = <0x00200000 0x00040000>;
+ };
+
+ partition@240000 {
+ label = "ubi";
+ reg = <0x00240000 0x3fdc0000>;
+ };
+
+ all {
+ label = "all";
+ reg = <0x00000000 0x40000000>;
+ };
+ };
+ };
+};
+
+&UART1 {
+ status = "okay";
+};
+
+&GPIO0 {
+ status = "okay";
+};
+
+&IIC0 {
+ status = "okay";
+};
+
+&EMAC0 {
+ status = "okay";
+ phy-handle = <&phy0>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x0010 0x40000000
+ 0x0624 0x007f7f7f
+ 0x0004 0x07a00000 /* PAD0_MODE */
+ 0x000c 0x01000000 /* PAD6_MODE */
+ 0x007c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+ };
+};
+
+&POB0 {
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power-green {
+ label = "mx60:green:power";
+ gpios = <&GPIO0 18 GPIO_ACTIVE_LOW>;
+ };
+
+ power-orange {
+ label = "mx60:orange:power";
+ gpios = <&GPIO0 19 GPIO_ACTIVE_LOW>;
+ };
+
+ wan-green {
+ label = "mx60:green:wan";
+ gpios = <&GPIO0 17 GPIO_ACTIVE_LOW>;
+ };
+
+ wan-orange {
+ label = "mx60:orange:wan";
+ gpios = <&GPIO0 15 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "mx60:green:lan1";
+ gpios = <&GPIO0 20 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "mx60:green:lan2";
+ gpios = <&GPIO0 21 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "mx60:green:lan3";
+ gpios = <&GPIO0 22 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "mx60:green:lan4";
+ gpios = <&GPIO0 23 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_keys_polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <60>; /* 3 * 20 = 60ms */
+ autorepeat;
+
+ button@1 {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&PCIE0 {
+ /* Leave this enabled as u-boot on the MX60 will disable it for us */
+ status = "okay";
+};
+
+&MSI {
+ status = "okay";
+};
diff --git a/target/linux/apm821xx/image/Makefile b/target/linux/apm821xx/image/Makefile
index c032c54416..48eef643e1 100644
--- a/target/linux/apm821xx/image/Makefile
+++ b/target/linux/apm821xx/image/Makefile
@@ -84,6 +84,38 @@ define Device/mr24
endef
TARGET_DEVICES += mr24
+define Device/mx60
+ DEVICE_TITLE := Cisco Meraki MX60
+ DEVICE_PACKAGES := kmod-spi-gpio swconfig kmod-usb-ledtrig-usbport \
+ kmod-usb-dwc2 kmod-usb-storage block-mount
+ DEVICE_PROFILE := MX60
+ DEVICE_DTS := MX60
+ BLOCKSIZE := 63k
+ IMAGES := sysupgrade.tar
+ DTB_SIZE := 64512
+ # The kernel size will need to match the offset defined in mkmerakifw.c,
+ # otherwise the final image will fail to boot. This is set within the
+ # MX60 kernel header definition which is found at
+ # ./tools/firmware-utils/src/mkmerakifw.c, line 103~
+ KERNEL_SIZE := 2984k
+ IMAGE_SIZE := 1021m
+ KERNEL := kernel-bin | gzip | uImage gzip | MerakiAdd-dtb | MerakiNAND
+ KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux | gzip | uImage gzip | \
+ check-size $$(KERNEL_SIZE) | \
+ MerakiAdd-dtb | pad-to 2047k | MerakiAdd-initramfs | \
+ MerakiNAND
+ IMAGE/sysupgrade.tar := sysupgrade-tar
+ UBINIZE_OPTS := -E 5
+endef
+TARGET_DEVICES += mx60
+
+define Device/mx60w
+$(Device/mx60)
+ DEVICE_TITLE := Cisco Meraki MX60W
+ DEVICE_PACKAGES += kmod-ath9k wpad-mini
+endef
+TARGET_DEVICES += mx60w
+
define Build/create-uImage-dtb
# flat_dt target expect FIT image - which WNDR4700's uboot doesn't support
-$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) \
diff --git a/target/linux/apm821xx/patches-4.4/203-add-meraki-mx60-buckminster-support.patch b/target/linux/apm821xx/patches-4.4/203-add-meraki-mx60-buckminster-support.patch
new file mode 100644
index 0000000000..5ecb7bc9e5
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.4/203-add-meraki-mx60-buckminster-support.patch
@@ -0,0 +1,32 @@
+--- a/arch/powerpc/platforms/44x/Kconfig
++++ b/arch/powerpc/platforms/44x/Kconfig
+@@ -30,6 +30,19 @@
+ help
+ This option enables support for the APM APM821xx Evaluation board.
+
++config BUCKMINSTER
++ bool "Buckminster"
++ depends on 44x
++ default n
++ select APM821xx
++ select PCI_MSI
++ select PPC4xx_MSI
++ select PPC4xx_PCI_EXPRESS
++ select IBM_EMAC_RGMII
++ select 460EX
++ help
++ This option enables support for the Cisco Meraki MX60/MX60W (Buckminster) Security Appliance
++
+ config EBONY
+ bool "Ebony"
+ depends on 44x
+--- a/arch/powerpc/platforms/44x/ppc44x_simple.c
++++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
+@@ -63,6 +63,7 @@
+ "amcc,sequoia",
+ "amcc,taishan",
+ "amcc,yosemite",
++ "meraki,buckminster",
+ "meraki,ikarem",
+ "mosaixtech,icon"
+ };