diff options
| author | Shuanglin Liu <roboidler@gmail.com> | 2017-03-03 01:23:50 +0800 |
|---|---|---|
| committer | Piotr Dymacz <pepe2k@gmail.com> | 2017-03-12 17:38:31 +0100 |
| commit | 53ef20f65acdcd068b1166d2522dcbe7d7e298c4 (patch) | |
| tree | 6e6d29ed06c159cca3652b42326052277802f0ec /target/linux/ar71xx/base-files/etc/board.d/01_leds | |
| parent | 3183015e1e1573eae69717f66685c880439c7f2f (diff) | |
| download | upstream-53ef20f65acdcd068b1166d2522dcbe7d7e298c4.tar.gz upstream-53ef20f65acdcd068b1166d2522dcbe7d7e298c4.tar.bz2 upstream-53ef20f65acdcd068b1166d2522dcbe7d7e298c4.zip | |
ar71xx: add support for Rockeetech AP531B0
Specification:
- SoC: Qualcomm Atheros QCA9531 (650/400/216 MHz (CPU/DDR/AHB))
- RAM: 64 MiB DDR2
- Storage: 16 MiB of flash (optional 16 MiB second flash)
- Wireless: built into QCA9531 (Honey Bee), PHY modes b/g/n
- Ethernet: 1x100M (port0) 1x100M (port 4)
- PCI-E: x1
- SIMcard slot: x1
- USB 2.0 port: x1 (optional)
- Ext GPIO pin: x8
- UART for serial console: x1
- External watchdog: x1 (optional)
- Power supply: 9-48V (DC jack/passive PoE)
Installation through tftp:
- Copy <Firmware Image Name> into tftp directory
- Connect board via ttl port and Ethernet port
- Boot the AP531B0
- When "Autobooting in 1 seconds" appears press Enter
- Set serverip and ipaddr appropriate
(e.g. setenv serverip 192.168.88.10;setenv ipaddr 192.168.88.1)
- Enter "tftp 0x8050000 <Firmware Image Name>"
- Enter "erase 0x9f050000 +$filesize"
- Enter "cp.b 0x80500000 0x9f050000 $filesize"
- Enter "reset"
Signed-off-by: Shuanglin Liu <roboidler@gmail.com>
Diffstat (limited to 'target/linux/ar71xx/base-files/etc/board.d/01_leds')
| -rwxr-xr-x | target/linux/ar71xx/base-files/etc/board.d/01_leds | 9 |
1 files changed, 5 insertions, 4 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 0ed533dddb..32d49318e6 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -49,6 +49,11 @@ antrouter-r1) ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" ucidef_set_led_default "btc" "BTC" "$board:green:btc" "0" ;; +ap531b0|\ +sc1750|\ +sc450) + ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" + ;; archer-c59-v1|\ archer-c60-v1) ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x1E" @@ -490,10 +495,6 @@ re450) ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan2g" "phy1tpt" ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan5g" "phy0tpt" ;; -sc1750|\ -sc450) - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ;; smart-300) ucidef_set_led_netdev "wan" "WAN" "nc-link:green:wan" "eth0" ucidef_set_led_switch "lan1" "LAN1" "nc-link:green:lan1" "switch0" "0x04" |