ar71xx: drop target

This target has been mostly replaced by ath79 and won't be included
in the upcoming release anymore. Finally put it to rest.

This also removes all references in packages, tools, etc. as well as
the uboot-ar71xx and vsc73x5-ucode packages.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 195 deletions

diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
deleted file mode 100644
index c0e8f17d94..0000000000
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ /dev/null
@@ -1,195 +0,0 @@
-#!/bin/sh
-
-ath10kcal_die() {
-	echo "ath10cal: " "$*"
-	exit 1
-}
-
-ath10kcal_from_file() {
-	local source=$1
-	local offset=$(($2))
-	local count=$(($3))
-
-	dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
-		ath10kcal_die "failed to extract calibration data from $source"
-}
-
-ath10kcal_extract() {
-	local part=$1
-	local offset=$(($2))
-	local count=$(($3))
-	local mtd cal_size
-
-	mtd=$(find_mtd_chardev $part)
-	[ -n "$mtd" ] || \
-		ath10kcal_die "no mtd device found for partition $part"
-
-	# Check that the calibration data size in header equals the desired size
-	cal_size=$(dd if=$mtd bs=2 count=1 skip=$(( $offset / 2 )) conv=swab 2>/dev/null | hexdump -ve '1/2 "%d"')
-
-	[ "$count" = "$cal_size" ] || \
-		ath10kcal_die "no calibration data found in $part"
-
-	dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
-		ath10kcal_die "failed to extract calibration data from $mtd"
-}
-
-ath10kcal_patch_mac() {
-	local mac=$1
-
-	[ -z "$mac" ] && return
-
-	macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc oflag=seek_bytes bs=6 seek=6 count=1
-}
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions.sh
-. /lib/functions/system.sh
-
-board=$(board_name)
-
-case "$FIRMWARE" in
-"ath10k/cal-pci-0000:00:00.0.bin")
-	case $board in
-	a40|\
-	a60|\
-	mr1750|\
-	mr1750v2|\
-	om5p-acv2)
-		ath10kcal_extract "ART" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
-		;;
-	archer-c25-v1|\
-	tl-wdr6500-v2)
-		ath10kcal_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
-		;;
-	archer-c7-v4|\
-	archer-c7-v5)
-		ath10kcal_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
-		;;
-	cf-e355ac-v1|\
-	cf-e380ac-v1|\
-	cf-e380ac-v2|\
-	dlan-pro-1200-ac|\
-	e1700ac-v2|\
-	e600gac-v2|\
-	minibox-v3.2|\
-	oolite-v5.2|\
-	oolite-v5.2-dev|\
-	sr3200|\
-	xd3200)
-		ath10kcal_extract "art" 0x5000 0x844
-		;;
-	dap-2695-a1)
-		ath10kcal_extract "radiocfg" 0x5000 0x844
-		ath10kcal_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
-		;;
-	dir-869-a1|\
-	qihoo-c301)
-		ath10kcal_extract "radiocfg" 0x5000 0x844
-		ath10kcal_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
-		;;
-	dw33d)
-		ath10kcal_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(mtd_get_mac_binary art 0x12)
-		;;
-	epg5000|\
-	esr1750)
-		ath10kcal_extract "caldata" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
-		;;
-	gl-ar750s|\
-	gl-ar750|\
-	tl-wpa8630)
-		ath10kcal_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
-		;;
-	koala)
-		ath10kcal_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0xc) +0)
-		;;
-	mc-mac1200r)
-		ath10kcal_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1)
-		;;
-	r6100)
-		ath10kcal_extract "caldata" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) +2)
-		;;
-	rb-952ui-5ac2nd|\
-	rb-wapg-5hact2hnd)
-		ath10kcal_from_file "/sys/firmware/mikrotik/hard_config/wlan_data" 0x5000 0x844
-		;;
-	re355|\
-	re450|\
-	tl-wr902ac-v1)
-		ath10kcal_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
-		;;
-	unifiac-lite|\
-	unifiac-pro)
-		ath10kcal_extract "EEPROM" 0x5000 0x844
-		;;
-	wi2a-ac200i)
-		ath10kcal_extract "ART" 0x5000 0x844
-		;;
-	esac
-	;;
-"ath10k/cal-pci-0000:01:00.0.bin")
-	case $board in
-	archer-c5|\
-	archer-c7)
-		ath10kcal_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1)
-		;;
-	nbg6616|\
-	nbg6716)
-		ath10kcal_extract "RFdata" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
-		;;
-	om5p-ac)
-		ath10kcal_extract "ART" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
-		;;
-	rb-911g-5hpacd|\
-	rb-921gs-5hpacd-r2|\
-	rb-922uags-5hpacd|\
-	rb-962uigs-5hact2hnt)
-		ath10kcal_from_file "/sys/firmware/mikrotik/hard_config/wlan_data" 0x5000 0x844
-		;;
-	wlr8100)
-		ath10kcal_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
-		;;
-	esac
-	;;
-"ath10k/pre-cal-pci-0000:00:00.0.bin")
-	case $board in
-	archer-c58-v1|\
-	archer-c59-v1|\
-	archer-c59-v2|\
-	archer-c60-v1|\
-	cf-e355ac-v2|\
-	cf-e375ac)
-		ath10kcal_extract "art" 0x5000 0x2f20
-		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
-			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-		;;
-	archer-c60-v2)
-		ath10kcal_extract "art" 0x5000 0x2f20
-		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
-			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1)
-		;;
-	cf-e385ac)
-		ath10kcal_extract "art" 0x5000 0x2f20
-		;;
-	esac
-	;;
-*)
-	exit 1
-	;;
-esac