diff options
author | Henryk Heisig <hyniu@o2.pl> | 2017-06-16 15:26:30 +0200 |
---|---|---|
committer | Piotr Dymacz <pepe2k@gmail.com> | 2017-06-29 10:37:36 +0200 |
commit | b05c7193fd289ff697324caccf77adf9ffa76373 (patch) | |
tree | e6a96df1048c168ef6f7b3f484a0e5fbaaf27bd9 /target/linux/ar71xx/base-files/lib/upgrade | |
parent | 01280bc8dc1d9ca089fad7b231d718e166698f4a (diff) | |
download | upstream-b05c7193fd289ff697324caccf77adf9ffa76373.tar.gz upstream-b05c7193fd289ff697324caccf77adf9ffa76373.tar.bz2 upstream-b05c7193fd289ff697324caccf77adf9ffa76373.zip |
ar71xx: add support for TP-Link Archer C58 v1
TP-Link Archer C58 v1 is a dual-band AC1350 router, based on Qualcomm
QCA9561 + QCA9886. It looks like Archer C59 v1 without USB port.
Specification:
- 775/650/258 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- 6x LED, 3x button
- UART header on PCB, RX, TX at TP4+5 (backside)
QCA9886 wlan needs pre_cal_data file and enable ieee80211 phy hotplug to
patch macaddress.
Flash instruction:
Use "factory" image directly in vendor GUI.
Recovery method:
1. Set PC to fixed ip address 192.168.0.66/24.
2. Download "lede-ar71xx-generic-archer-c58-v1-squashfs-factory.bin" and
rename it to "tp_recovery.bin".
3. Start a tftp server with the file "tp_recovery.bin" in its root
directory.
4. Turn off the router.
5. Press and hold Reset button.
6. Turn on router with the reset button pressed and wait ~15 seconds.
7. Release the reset button and after a short time the firmware should
be transferred from the tftp server.
8. Wait ~30 second to complete recovery.
Flash instruction under U-Boot, using UART:
tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin
erase 0x9f020000 +$filesize
cp.b $fileaddr 0x9f020000 $filesize
reset
This commit is based on GitHub PR#1112
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
Diffstat (limited to 'target/linux/ar71xx/base-files/lib/upgrade')
-rwxr-xr-x | target/linux/ar71xx/base-files/lib/upgrade/platform.sh | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 454af2c3e6..85fc1e9122 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -207,6 +207,7 @@ platform_check_image() { ap531b0|\ ap90q|\ archer-c25-v1|\ + archer-c58-v1|\ archer-c59-v1|\ archer-c60-v1|\ bullet-m|\ |