ar71xx: drop target

This target has been mostly replaced by ath79 and won't be included
in the upcoming release anymore. Finally put it to rest.

This also removes all references in packages, tools, etc. as well as
the uboot-ar71xx and vsc73x5-ucode packages.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 191 deletions

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-b1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-b1.c
deleted file mode 100644
index 9b82990b13..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-b1.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- *  D-Link DIR-825 rev. B1 board support
- *
- *  Copyright (C) 2009-2011 Lukas Kuna, Evkanet, s.r.o.
- *
- *  based on mach-wndr3700.c
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/rtl8366.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define DIR825B1_GPIO_LED_BLUE_USB		0
-#define DIR825B1_GPIO_LED_ORANGE_POWER		1
-#define DIR825B1_GPIO_LED_BLUE_POWER		2
-#define DIR825B1_GPIO_LED_BLUE_WPS		4
-#define DIR825B1_GPIO_LED_ORANGE_PLANET		6
-#define DIR825B1_GPIO_LED_BLUE_PLANET		11
-
-#define DIR825B1_GPIO_BTN_RESET			3
-#define DIR825B1_GPIO_BTN_WPS			8
-
-#define DIR825B1_GPIO_RTL8366_SDA		5
-#define DIR825B1_GPIO_RTL8366_SCK		7
-
-#define DIR825B1_KEYS_POLL_INTERVAL		20	/* msecs */
-#define DIR825B1_KEYS_DEBOUNCE_INTERVAL		(3 * DIR825B1_KEYS_POLL_INTERVAL)
-
-#define DIR825B1_CAL0_OFFSET			0x1000
-#define DIR825B1_CAL1_OFFSET			0x5000
-#define DIR825B1_MAC0_OFFSET			0xffa0
-#define DIR825B1_MAC1_OFFSET			0xffb4
-
-#define DIR825B1_CAL_LOCATION_0			0x1f660000
-#define DIR825B1_CAL_LOCATION_1			0x1f7f0000
-
-static struct gpio_led dir825b1_leds_gpio[] __initdata = {
-	{
-		.name		= "d-link:blue:usb",
-		.gpio		= DIR825B1_GPIO_LED_BLUE_USB,
-		.active_low	= 1,
-	}, {
-		.name		= "d-link:orange:power",
-		.gpio		= DIR825B1_GPIO_LED_ORANGE_POWER,
-		.active_low	= 1,
-	}, {
-		.name		= "d-link:blue:power",
-		.gpio		= DIR825B1_GPIO_LED_BLUE_POWER,
-		.active_low	= 1,
-	}, {
-		.name		= "d-link:blue:wps",
-		.gpio		= DIR825B1_GPIO_LED_BLUE_WPS,
-		.active_low	= 1,
-	}, {
-		.name		= "d-link:orange:planet",
-		.gpio		= DIR825B1_GPIO_LED_ORANGE_PLANET,
-		.active_low	= 1,
-	}, {
-		.name		= "d-link:blue:planet",
-		.gpio		= DIR825B1_GPIO_LED_BLUE_PLANET,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button dir825b1_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= DIR825B1_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "wps",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= DIR825B1_GPIO_BTN_WPS,
-		.active_low	= 1,
-	}
-};
-
-static struct rtl8366_initval dir825b1_rtl8366s_initvals[] = {
-	{ .reg = 0x06, .val = 0x0108 },
-};
-
-static struct rtl8366_platform_data dir825b1_rtl8366s_data = {
-	.gpio_sda	= DIR825B1_GPIO_RTL8366_SDA,
-	.gpio_sck	= DIR825B1_GPIO_RTL8366_SCK,
-	.num_initvals	= ARRAY_SIZE(dir825b1_rtl8366s_initvals),
-	.initvals	= dir825b1_rtl8366s_initvals,
-};
-
-static struct platform_device dir825b1_rtl8366s_device = {
-	.name		= RTL8366S_DRIVER_NAME,
-	.id		= -1,
-	.dev = {
-		.platform_data	= &dir825b1_rtl8366s_data,
-	}
-};
-
-static bool __init dir825b1_is_caldata_valid(u8 *p)
-{
-	u16 *magic0, *magic1;
-
-	magic0 = (u16 *)(p + DIR825B1_CAL0_OFFSET);
-	magic1 = (u16 *)(p + DIR825B1_CAL1_OFFSET);
-
-	return (*magic0 == 0xa55a && *magic1 == 0xa55a);
-}
-
-static void __init dir825b1_wlan_init(void)
-{
-	u8 *caldata;
-	u8 mac0[ETH_ALEN], mac1[ETH_ALEN];
-	u8 wmac0[ETH_ALEN], wmac1[ETH_ALEN];
-
-	caldata = (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0);
-	if (!dir825b1_is_caldata_valid(caldata)) {
-		caldata = (u8 *)KSEG1ADDR(DIR825B1_CAL_LOCATION_1);
-		if (!dir825b1_is_caldata_valid(caldata)) {
-			pr_err("no calibration data found\n");
-			return;
-		}
-	}
-
-	ath79_parse_ascii_mac(caldata + DIR825B1_MAC0_OFFSET, mac0);
-	ath79_parse_ascii_mac(caldata + DIR825B1_MAC1_OFFSET, mac1);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 0);
-	ath79_init_mac(wmac0, mac0, 0);
-	ath79_init_mac(wmac1, mac1, 1);
-
-	ap9x_pci_setup_wmac_led_pin(0, 5);
-	ap9x_pci_setup_wmac_led_pin(1, 5);
-
-	ap94_pci_init(caldata + DIR825B1_CAL0_OFFSET, wmac0,
-		      caldata + DIR825B1_CAL1_OFFSET, wmac1);
-}
-
-static void __init dir825b1_setup(void)
-{
-	dir825b1_wlan_init();
-
-	ath79_register_mdio(0, 0x0);
-
-	ath79_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.speed = SPEED_1000;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-	ath79_eth0_pll_data.pll_1000 = 0x11110000;
-
-	ath79_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth1_data.phy_mask = 0x10;
-	ath79_eth1_pll_data.pll_1000 = 0x11110000;
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	ath79_register_m25p80(NULL);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio),
-				 dir825b1_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, DIR825B1_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(dir825b1_gpio_keys),
-					dir825b1_gpio_keys);
-
-	ath79_register_usb();
-
-	platform_device_register(&dir825b1_rtl8366s_device);
-}
-
-MIPS_MACHINE(ATH79_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1",
-	     dir825b1_setup);