ar71xx: drop target

This target has been mostly replaced by ath79 and won't be included
in the upcoming release anymore. Finally put it to rest.

This also removes all references in packages, tools, etc. as well as
the uboot-ar71xx and vsc73x5-ucode packages.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 195 deletions

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c
deleted file mode 100644
index 04b12fc7cc..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * Sitecom X8 AC1750 WLR-8100 board support
- *
- * Based on the Qualcomm Atheros AP135/AP136 reference board support code
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define WLR8100_GPIO_LED_USB		4
-#define WLR8100_GPIO_LED_WLAN_5G	12
-#define WLR8100_GPIO_LED_WLAN_2G	13
-#define WLR8100_GPIO_LED_STATUS_RED	14
-#define WLR8100_GPIO_LED_WPS_RED	15
-#define WLR8100_GPIO_LED_STATUS_AMBER	19
-#define WLR8100_GPIO_LED_WPS_GREEN	20
-
-#define WLR8100_GPIO_BTN_WPS		16
-#define WLR8100_GPIO_BTN_RFKILL		21
-
-#define WLR8100_KEYS_POLL_INTERVAL	20	/* msecs */
-#define WLR8100_KEYS_DEBOUNCE_INTERVAL	(3 * WLR8100_KEYS_POLL_INTERVAL)
-
-static struct gpio_led wlr8100_leds_gpio[] __initdata = {
-	{
-		.name		= "wlr8100:amber:status",
-		.gpio		= WLR8100_GPIO_LED_STATUS_AMBER,
-		.active_low	= 1,
-	},
-	{
-		.name		= "wlr8100:red:status",
-		.gpio		= WLR8100_GPIO_LED_STATUS_RED,
-		.active_low	= 1,
-	},
-	{
-		.name		= "wlr8100:green:wps",
-		.gpio		= WLR8100_GPIO_LED_WPS_GREEN,
-		.active_low	= 1,
-	},
-	{
-		.name		= "wlr8100:red:wps",
-		.gpio		= WLR8100_GPIO_LED_WPS_RED,
-		.active_low	= 1,
-	},
-	{
-		.name		= "wlr8100:red:wlan-2g",
-		.gpio		= WLR8100_GPIO_LED_WLAN_2G,
-		.active_low	= 1,
-	},
-	{
-		.name		= "wlr8100:red:usb",
-		.gpio		= WLR8100_GPIO_LED_USB,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button wlr8100_gpio_keys[] __initdata = {
-	{
-		.desc		= "WPS button",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = WLR8100_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= WLR8100_GPIO_BTN_WPS,
-		.active_low	= 1,
-	},
-	{
-		.desc		= "RFKILL button",
-		.type		= EV_KEY,
-		.code		= KEY_RFKILL,
-		.debounce_interval = WLR8100_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= WLR8100_GPIO_BTN_RFKILL,
-		.active_low	= 1,
-	},
-};
-
-static struct ar8327_pad_cfg wlr8100_ar8327_pad0_cfg;
-static struct ar8327_pad_cfg wlr8100_ar8327_pad6_cfg;
-
-static struct ar8327_platform_data wlr8100_ar8327_data = {
-	.pad0_cfg = &wlr8100_ar8327_pad0_cfg,
-	.pad6_cfg = &wlr8100_ar8327_pad6_cfg,
-	.port0_cfg = {
-		.force_link = 1,
-		.speed = AR8327_PORT_SPEED_1000,
-		.duplex = 1,
-		.txpause = 1,
-		.rxpause = 1,
-	},
-	.port6_cfg = {
-		.force_link = 1,
-		.speed = AR8327_PORT_SPEED_1000,
-		.duplex = 1,
-		.txpause = 1,
-		.rxpause = 1,
-	},
-};
-
-static struct mdio_board_info wlr8100_mdio0_info[] = {
-	{
-		.bus_id = "ag71xx-mdio.0",
-		.mdio_addr = 0,
-		.platform_data = &wlr8100_ar8327_data,
-	},
-};
-
-static void __init wlr8100_common_setup(void)
-{
-
-	ath79_register_m25p80(NULL);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(wlr8100_leds_gpio),
-				 wlr8100_leds_gpio);
-	ath79_register_gpio_keys_polled(-1, WLR8100_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(wlr8100_gpio_keys),
-					wlr8100_gpio_keys);
-
-	ath79_register_usb();
-
-	ath79_register_wmac_simple();
-
-	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
-	ath79_register_mdio(0, 0x0);
-
-	mdiobus_register_board_info(wlr8100_mdio0_info,
-				    ARRAY_SIZE(wlr8100_mdio0_info));
-
-	/* GMAC0 is connected to the RMGII interface */
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.phy_mask = BIT(0);
-	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-
-	ath79_register_eth(0);
-
-	/* GMAC1 is connected tot eh SGMII interface */
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
-	ath79_eth1_data.speed = SPEED_1000;
-	ath79_eth1_data.duplex = DUPLEX_FULL;
-
-	ath79_register_eth(1);
-}
-
-static void __init wlr8100_010_setup(void)
-{
-	/* GMAC0 of the AR8337 switch is connected to GMAC0 via RGMII */
-	wlr8100_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
-	wlr8100_ar8327_pad0_cfg.txclk_delay_en = true;
-	wlr8100_ar8327_pad0_cfg.rxclk_delay_en = true;
-	wlr8100_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
-	wlr8100_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
-
-	/* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */
-	wlr8100_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
-	wlr8100_ar8327_pad6_cfg.rxclk_delay_en = true;
-	wlr8100_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
-
-	ath79_eth0_pll_data.pll_1000 = 0xa6000000;
-	ath79_eth1_pll_data.pll_1000 = 0x03000101;
-
-	wlr8100_common_setup();
-	ap91_pci_init_simple();
-}
-
-MIPS_MACHINE(ATH79_MACH_WLR8100, "WLR8100",
-	     "Sitecom WLR-8100",
-	     wlr8100_010_setup);
-