aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/files
diff options
context:
space:
mode:
authorRoger Pueyo Centelles <roger.pueyo@guifi.net>2018-01-08 12:55:05 +0100
committerDaniel Golle <daniel@makrotopia.org>2018-01-15 04:14:18 +0100
commite15c63a37574bd15ce3a6636c2f04741ab76f7b9 (patch)
treef389bc1d76d099cf78be91cc3612faa60b0cfadb /target/linux/ar71xx/files
parent20e68f6d395d72ca8a5d5ec364bc7cf4c1862b87 (diff)
downloadupstream-e15c63a37574bd15ce3a6636c2f04741ab76f7b9.tar.gz
upstream-e15c63a37574bd15ce3a6636c2f04741ab76f7b9.tar.bz2
upstream-e15c63a37574bd15ce3a6636c2f04741ab76f7b9.zip
ar71xx: add support for MikroTik RouterBOARD wAP G-5HacT2HnD (wAP AC)
This patch adds support for the MikroTik RouterBOARD wAP G-5HacT2HnD (wAP AC), a small weatherproof dual band, dual-radio 802.11ac wireless AP with integrated omnidirectional anntennae and one 10/100/1000 Mbps Ethernet ports. See https://mikrotik.com/product/RBwAPG-5HacT2HnD for more info. Specifications: - SoC: Qualcomm Atheros QCA9556 - RAM: 64 MB - Storage: 16 MB NOR - Wireless: · Atheros AR9550 (SoC) 802.11b/g/n 2x2:2, 2 dBi antennae · Qualcomm QCA9880 802.11a/n/ac 3x3:3, 2 dBi antennae - Ethernet: Atheros AG71xx (SoC, AR8033), 1x 1000/100/10 port, passive PoE in Working: - Board/system detection - Sysupgrade - Serial console - Ethernet - 2.4 GHz radio - 5 GHz radio - Reset button Not working: - LEDs (added according to Mikrotik's GPL sources but not functional) Unsupported: - ZT2046Q SPI temperature and voltage sensor Contributors: Giuseppe Tipaldi (@Ciusss89) Ricky (@rickydee) Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [daniel@makrotopia.org: whitespace fix, use PHYADDR instead of PHYMASK]
Diffstat (limited to 'target/linux/ar71xx/files')
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c97
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
2 files changed, 95 insertions, 3 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c
index cfd7373164..8d8dd40e8a 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c
@@ -12,6 +12,7 @@
* - MikroTik RouterBOARD 750 r2
* - MikroTik RouterBOARD LHG 5nD
* - MikroTik RouterBOARD wAP2nD
+ * - MikroTik RouterBOARD wAP G-5HacT2HnDwAP (wAP AC)
*
* Preliminary support for the following hardware
* - MikroTik RouterBOARD cAP2nD
@@ -41,6 +42,8 @@
#include <linux/mtd/partitions.h>
#include <linux/ar8216_platform.h>
+#include <linux/platform_data/phy-at803x.h>
+#include <linux/platform_data/mdio-gpio.h>
#include <asm/prom.h>
#include <asm/mach-ath79/ar71xx_regs.h>
@@ -134,10 +137,22 @@ static struct flash_platform_data rbspi_spi_flash_data = {
.nr_parts = ARRAY_SIZE(rbspi_spi_partitions),
};
-/* Several boards only have a single reset button wired to GPIO 16 */
+/* Several boards only have a single reset button, wired to GPIO 1, 16 or 20 */
+#define RBSPI_GPIO_BTN_RESET01 1
#define RBSPI_GPIO_BTN_RESET16 16
#define RBSPI_GPIO_BTN_RESET20 20
+static struct gpio_keys_button rbspi_gpio_keys_reset01[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = RBSPI_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = RBSPI_GPIO_BTN_RESET01,
+ .active_low = 1,
+ },
+};
+
static struct gpio_keys_button rbspi_gpio_keys_reset16[] __initdata = {
{
.desc = "Reset button",
@@ -485,6 +500,40 @@ static struct gpio_keys_button rblhg_gpio_keys[] __initdata = {
},
};
+/* RB w APG-5HacT2HnD (wAP AC) gpios*/
+#define RBWAPGSC_LED1 1
+#define RBWAPGSC_LED2 8
+#define RBWAPGSC_LED3 9
+#define RBWAPGSC_POWERLED 16
+#define RBWAPGSC_GPIO_MDIO_MDC 12
+#define RBWAPGSC_GPIO_MDIO_DATA 11
+#define RBWAPGSC_MDIO_PHYADDR 0
+
+static struct gpio_led rbwapgsc_leds[] __initdata = {
+ {
+ .name = "rb:green:led1",
+ .gpio = RBWAPGSC_LED1,
+ .active_low = 1,
+ },{
+ .name = "rb:blue:power",
+ .gpio = RBWAPGSC_POWERLED,
+ .active_low = 1,
+ },
+};
+
+static struct mdio_gpio_platform_data rbwapgsc_mdio_data = {
+ .mdc = RBWAPGSC_GPIO_MDIO_MDC,
+ .mdio = RBWAPGSC_GPIO_MDIO_DATA,
+ .phy_mask = ~BIT(RBWAPGSC_MDIO_PHYADDR),
+};
+
+static struct platform_device rbwapgsc_phy_device = {
+ .name = "mdio-gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &rbwapgsc_mdio_data
+ },
+};
static struct gen_74x164_chip_platform_data rbspi_ssr_data = {
.base = RBSPI_SSR_GPIO_BASE,
@@ -538,7 +587,7 @@ void __init rbspi_wlan_init(u16 id, int wmac_offset)
}
#define RBSPI_MACH_BUFLEN 64
-/*
+/*
* Common platform init routine for all SPI NOR devices.
*/
static int __init rbspi_platform_setup(void)
@@ -641,7 +690,7 @@ static void __init rbspi_network_setup(u32 flags, int gmac1_offset,
rbspi_wlan_init(1, wmac1_offset);
}
-/*
+/*
* Init the mAP lite hardware (QCA953x).
* The mAP L-2nD (mAP lite) has a single ethernet port, connected to PHY0.
* Trying to use GMAC0 in direct mode was unsucessful, so we're
@@ -958,6 +1007,47 @@ static void __init rbmap_setup(void)
rbspi_gpio_keys_reset16);
}
+/*
+ * Init the wAPGSC (RB wAPG-5HacT2HnD // wAP AC) hardware.
+ * The wAPGSC has one Ethernet port via AR8033 with PoE input, dual radio (SoC
+ * 2.4 GHz and external QCA9880) and a ZT2046Q temperature and voltage sensor
+ * (currently not supported).
+ */
+static void __init rbwapgsc_setup(void)
+{
+ u32 flags = RBSPI_HAS_PCI;
+
+ if (rbspi_platform_setup())
+ return;
+
+ rbspi_peripherals_setup(flags);
+
+ platform_device_register(&rbwapgsc_phy_device);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth1_data.mii_bus_dev = &rbwapgsc_phy_device.dev;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth1_data.phy_mask = BIT(RBWAPGSC_MDIO_PHYADDR);
+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
+ ath79_eth1_pll_data.pll_100 = 0x80000101;
+ ath79_eth1_pll_data.pll_10 = 0x80001313;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_register_eth(1);
+
+ rbspi_wlan_init(1, 2);
+
+ ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(rbspi_gpio_keys_reset01),
+ rbspi_gpio_keys_reset01);
+
+ ath79_gpio_function_enable(QCA955X_GPIO_FUNC_JTAG_DISABLE|
+ QCA955X_GPIO_REG_OUT_FUNC4|
+ QCA955X_GPIO_REG_OUT_FUNC3);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rbwapgsc_leds),
+ rbwapgsc_leds);
+}
MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAPL, "map-hb", rbmapl_setup);
MIPS_MACHINE_NONAME(ATH79_MACH_RB_941, "H951L", rbhapl_setup);
@@ -968,3 +1058,4 @@ MIPS_MACHINE_NONAME(ATH79_MACH_RB_LHG5, "lhg", rblhg_setup);
MIPS_MACHINE_NONAME(ATH79_MACH_RB_WAP, "wap-hb", rbwap_setup);
MIPS_MACHINE_NONAME(ATH79_MACH_RB_CAP, "cap-hb", rbcap_setup);
MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAP, "map2-hb", rbmap_setup);
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_WAPAC, "wapg-sc", rbwapgsc_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 1a2c0386f8..a621fe2c90 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -201,6 +201,7 @@ enum ath79_mach_type {
ATH79_MACH_RB_MAP, /* Mikrotik RouterBOARD mAP2nD */
ATH79_MACH_RB_MAPL, /* Mikrotik RouterBOARD mAP L-2nD */
ATH79_MACH_RB_WAP, /* Mikrotik RouterBOARD wAP2nD */
+ ATH79_MACH_RB_WAPAC, /* Mikrotik RouterBOARD wAPG-5HacT2HnD */
ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */
ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */
ATH79_MACH_RE450, /* TP-LINK RE450 */