diff options
author | David Bauer <mail@david-bauer.net> | 2019-06-11 17:27:51 +0200 |
---|---|---|
committer | David Bauer <mail@david-bauer.net> | 2019-07-14 16:20:53 +0200 |
commit | cb3cd526948af3f69da1af18e035177a0a8f58e3 (patch) | |
tree | 7a9910246495b8a2c74cbea071db667f2b83c81c /target/linux/ath25/base-files | |
parent | ea44ed5f388aecb6f745f7dd9b7df00748f7785f (diff) | |
download | upstream-cb3cd526948af3f69da1af18e035177a0a8f58e3.tar.gz upstream-cb3cd526948af3f69da1af18e035177a0a8f58e3.tar.bz2 upstream-cb3cd526948af3f69da1af18e035177a0a8f58e3.zip |
ath79: add support for devolo WiFi pro 1750x
Hardware
--------
CPU: Qualcomm Atheros QCA9558
RAM: 128M DDR2
FLASH: 16MiB
ETH: 1x Atheros AR8035 (PoE in)
WiFi2: QCA9558 3T3R
WiFi5: QCA9880 3T3R
BTN: 1x Reset
LED: 1x LED Power (non-controllable)
1x LED Status (internal)
1x LED LAN (controlled by PHY)
1x LED WLAN
BEEP: 1x GPIO attached piezo beeper
UART: 3.3V GND TX RX (115200-N-8) (3.3V is square pad)
Header is located next to external-LED header.
Installation
------------
Make sure you set a password for the root user as prompted on first
setup!
1. Upload OpenWRT sysupgrade image via SSH to the device.
Use /tmp as the destination folder on the device.
User is root, password the one set in the web interface.
2. Install OpenWRT with
> sysupgrade -n -F /tmp/<openwrt-image-name>
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ath25/base-files')
0 files changed, 0 insertions, 0 deletions