aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
diff options
context:
space:
mode:
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>2019-07-20 12:01:14 +0200
committerDavid Bauer <mail@david-bauer.net>2019-08-07 18:04:03 +0200
commit08857e69becc214336ba073bca6f626bfaa67781 (patch)
treeaf098ae63130c0a926573480e66db02abfe07c27 /target/linux/ath79/base-files/etc/board.d/03_gpio_switches
parent198eae28623e9e422fe3b52ac53632fab980a561 (diff)
downloadupstream-08857e69becc214336ba073bca6f626bfaa67781.tar.gz
upstream-08857e69becc214336ba073bca6f626bfaa67781.tar.bz2
upstream-08857e69becc214336ba073bca6f626bfaa67781.zip
ath79: add support for TP-Link CPE210 v1
Specifications: * SoC: Qualcomm Atheros AR9344 (560 MHz) * RAM: 64MB * Storage: 8 MB * Wireless: 2.4GHz N based built into SoC 2x2 * Ethernet: 2x 100/10 Mbps, integrated into SoC, 24V POE IN Installation: Flash factory image through stock firmware WEB UI or through TFTP: To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP address:192.168.0.254 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/base-files/etc/board.d/03_gpio_switches')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/03_gpio_switches3
1 files changed, 3 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
index f588b29956..3f79ceefaf 100755
--- a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
@@ -42,6 +42,9 @@ tplink,archer-c25-v1)
ucidef_add_gpio_switch "led_control" "LED control" "21" "0"
ucidef_add_gpio_switch "led_reset" "LED reset" "19" "1"
;;
+tplink,cpe210-v1)
+ ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20"
+ ;;
ubnt,nanostation-ac)
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "3"
;;