diff options
| author | David Bauer <mail@david-bauer.net> | 2019-01-01 19:17:22 +0100 |
|---|---|---|
| committer | Christian Lamparter <chunkeey@gmail.com> | 2019-01-05 21:55:22 +0100 |
| commit | 8d68be8057d6c689025cc236d20b96b77a6ccf30 (patch) | |
| tree | ddf3f9b2995c550628a6a12fe5fa6d03eb9d88f6 /target/linux/ath79/base-files/etc/hotplug.d | |
| parent | 6ba58b7b020c4b793e6fb7a43c8adef070579d8d (diff) | |
| download | upstream-8d68be8057d6c689025cc236d20b96b77a6ccf30.tar.gz upstream-8d68be8057d6c689025cc236d20b96b77a6ccf30.tar.bz2 upstream-8d68be8057d6c689025cc236d20b96b77a6ccf30.zip | |
ath79: add support for devolo WiFi pro 1750i
Hardware
--------
CPU: Qualcomm Atheros QCA9558
RAM: 128M DDR2
FLASH: 16MiB
ETH: 1x Atheros AR8035 (PoE in)
WiFi2: QCA9558 3T3R
WiFi5: QCA9880 3T3R
BTN: 1x Reset
LED: 1x LED blue
1x LED red
BEEP: 1x GPIO attached piezo beeper
UART: 3.3V GND TX RX (115200-N-8) (3.3V is square pad)
Header is located next to reset-button
Installation
------------
Make sure you set a password for the root user as prompted on first
setup!
1. Upload OpenWRT sysupgrade image via SSH to the device.
Use /tmp as the destination folder on the device.
User is root, password the one set in the web interface.
2. Install OpenWRT with
> sysupgrade -n -F /tmp/<openwrt-image-name>
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ath79/base-files/etc/hotplug.d')
| -rw-r--r-- | target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index faee781970..9fc0f80569 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -88,7 +88,8 @@ case "$FIRMWARE" in "ath10k/cal-pci-0000:00:00.0.bin") case $board in devolo,dvl1200e|\ - devolo,dvl1750c) + devolo,dvl1750c|\ + devolo,dvl1750i) ath10kcal_extract "art" 20480 2116 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0) -1) ;; |