aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/base-files/etc
diff options
context:
space:
mode:
authorJohn Crispin <john@phrozen.org>2018-05-06 10:20:11 +0200
committerJohn Crispin <john@phrozen.org>2018-05-07 08:06:51 +0200
commit53c474abbdfef8eb3499e2d10c9ad491788b8a72 (patch)
treeacd19415420664f59bc63c1ceb4ad37bb7323027 /target/linux/ath79/base-files/etc
parent3dc523f232ff01d31d59345f5fa6de508d5059ef (diff)
downloadupstream-53c474abbdfef8eb3499e2d10c9ad491788b8a72.tar.gz
upstream-53c474abbdfef8eb3499e2d10c9ad491788b8a72.tar.bz2
upstream-53c474abbdfef8eb3499e2d10c9ad491788b8a72.zip
ath79: add new OF only target for QCA MIPS silicon
This target aims to replace ar71xx mid-term. The big part that is still missing is making the MMIO/AHB wifi work using OF. NAND and mikrotik subtargets will follow. Signed-off-by: John Crispin <john@phrozen.org>
Diffstat (limited to 'target/linux/ath79/base-files/etc')
-rw-r--r--target/linux/ath79/base-files/etc/board.d/01_leds21
-rw-r--r--target/linux/ath79/base-files/etc/board.d/02_network44
-rw-r--r--target/linux/ath79/base-files/etc/diag.sh38
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom40
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata58
5 files changed, 201 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
new file mode 100644
index 0000000000..9d42861939
--- /dev/null
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -0,0 +1,21 @@
+#!/bin/sh
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+"glinet,ar150")
+ ucidef_set_led_wlan "wlan" "WLAN" "gl-ar150:orange:wlan" "phy0tpt"
+ ;;
+"tplink,tl-wr1043nd-v1")
+ ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
+ ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
new file mode 100644
index 0000000000..941d2ab511
--- /dev/null
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -0,0 +1,44 @@
+#!/bin/sh
+
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults.sh
+
+ath79_setup_interfaces()
+{
+ local board="$1"
+
+ case "$board" in
+ "ubnt,unifi")
+ ucidef_set_interface_lan "eth0"
+ ;;
+
+ "tplink,tl-wr1043nd-v1")
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
+ ;;
+ "netgear,wndr3800")
+ ucidef_set_interfaces_lan_wan "eth0" "eth1"
+ ucidef_add_switch "switch0" \
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth0"
+
+ ucidef_add_switch_attr "switch0" "blinkrate" 2
+ ucidef_add_switch_port_attr "switch0" 1 led 6
+ ucidef_add_switch_port_attr "switch0" 2 led 9
+ ucidef_add_switch_port_attr "switch0" 5 led 2
+ ;;
+ "buffalo,wzr-hp-g450h")
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
+ ;;
+ *)
+ ucidef_set_interfaces_lan_wan "eth0" "eth1"
+ ;;
+ esac
+}
+
+board_config_update
+board=$(board_name)
+ath79_setup_interfaces $board
+board_config_flush
+
+exit 0
diff --git a/target/linux/ath79/base-files/etc/diag.sh b/target/linux/ath79/base-files/etc/diag.sh
new file mode 100644
index 0000000000..c9b32df94e
--- /dev/null
+++ b/target/linux/ath79/base-files/etc/diag.sh
@@ -0,0 +1,38 @@
+#!/bin/sh
+
+. /lib/functions/leds.sh
+
+get_status_led() {
+ local board=$(board_name)
+
+ case $board in
+ "glinet,ar150")
+ status_led="gl-ar150:orange:wlan"
+ ;;
+ "tplink,tl-wr1043nd-v1")
+ status_led="tp-link:green:system"
+ ;;
+ "ubnt,unifi")
+ status_led="ubnt:green:dome"
+ ;;
+ esac
+}
+
+set_state() {
+ get_status_led
+
+ case "$1" in
+ preinit)
+ status_led_blink_preinit
+ ;;
+ failsafe)
+ status_led_blink_failsafe
+ ;;
+ preinit_regular)
+ status_led_blink_preinit_regular
+ ;;
+ done)
+ status_led_on
+ ;;
+ esac
+}
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
new file mode 100644
index 0000000000..fc15caea6f
--- /dev/null
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -0,0 +1,40 @@
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+ath9k_eeprom_die() {
+ echo "ath9k eeprom: " "$*"
+ exit 1
+}
+
+ath9k_eeprom_extract() {
+ local part=$1
+ local offset=$2
+ local count=$3
+ local mtd
+
+ mtd=$(find_mtd_chardev $part)
+ [ -n "$mtd" ] || \
+ ath9k_eeprom_die "no mtd device found for partition $part"
+
+ dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
+ ath9k_eeprom_die "failed to extract from $mtd"
+}
+
+board=$(board_name)
+
+case "$FIRMWARE" in
+"ath9k-eeprom-pci-0000:00:00.0.bin")
+ case $board in
+ "ubnt,unifi")
+ ath9k_eeprom_extract "art" 4096 2048
+ ;;
+ *)
+ ath9k_eeprom_die "board $board is not supported yet"
+ ;;
+ esac
+ ;;
+esac
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
new file mode 100644
index 0000000000..2bbe5923bc
--- /dev/null
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -0,0 +1,58 @@
+#!/bin/sh
+
+ath10kcal_die() {
+ echo "ath10cal: " "$*"
+ exit 1
+}
+
+ath10kcal_from_file() {
+ local source=$1
+ local offset=$2
+ local count=$3
+
+ dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
+ ath10kcal_die "failed to extract calibration data from $source"
+}
+
+ath10kcal_extract() {
+ local part=$1
+ local offset=$2
+ local count=$3
+ local mtd
+
+ mtd=$(find_mtd_chardev $part)
+ [ -n "$mtd" ] || \
+ ath10kcal_die "no mtd device found for partition $part"
+
+ dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
+ ath10kcal_die "failed to extract calibration data from $mtd"
+}
+
+ath10kcal_patch_mac() {
+ local mac=$1
+
+ [ -z "$mac" ] && return
+
+ macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
+}
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+board=$(board_name)
+
+case "$FIRMWARE" in
+"ath10k/cal-pci-0000:00:00.0.bin")
+ case $board in
+ openmesh,om5p-ac-v2)
+ ath10kcal_extract "ART" 20480 2116
+ ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
+ ;;
+ esac
+ ;;
+*)
+ exit 1
+ ;;
+esac