aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/base-files/etc
diff options
context:
space:
mode:
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>2019-05-05 18:46:09 +0200
committerPetr Štetiar <ynezz@true.cz>2019-07-18 00:06:55 +0200
commit974d6958a7c6332438ab4cda98e72156c8d944ed (patch)
tree450d512a90f19f0b2382de74dc5f5c51cb33c130 /target/linux/ath79/base-files/etc
parent6d313da6dc5f655d92aa86e2ec42ecfcf763df3d (diff)
downloadupstream-974d6958a7c6332438ab4cda98e72156c8d944ed.tar.gz
upstream-974d6958a7c6332438ab4cda98e72156c8d944ed.tar.bz2
upstream-974d6958a7c6332438ab4cda98e72156c8d944ed.zip
ath79: Add support for TP-Link Archer C60 v2
TP-Link Archer C60 v2 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561 + QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Flash instruction (WebUI): Download *-factory.bin image and upload it via the firmwary upgrade function of the stock firmware WebUI. Flash instruction (TFTP): 1. Set PC to fixed IP address 192.168.0.66 2. Download *-factory.bin image and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery Flash instruction (under U-Boot, using UART): tftp 0x81000000 ...-sysupgrade.bin erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize reset Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/base-files/etc')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network3
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata1
3 files changed, 5 insertions, 2 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index 981ff24e93..16eb2d01e3 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -141,7 +141,8 @@ tplink,tl-wr842n-v3)
;;
tplink,archer-c58-v1|\
tplink,archer-c59-v1|\
-tplink,archer-c60-v1)
+tplink,archer-c60-v1|\
+tplink,archer-c60-v2)
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E"
ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
;;
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index de77203152..ed33ff5aad 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -217,7 +217,8 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
;;
- tplink,archer-c60-v1)
+ tplink,archer-c60-v1|\
+ tplink,archer-c60-v2)
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 7fa85e9048..d45003c837 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -209,6 +209,7 @@ case "$FIRMWARE" in
tplink,archer-c58-v1|\
tplink,archer-c59-v1|\
tplink,archer-c60-v1|\
+ tplink,archer-c60-v2|\
tplink,archer-c6-v2)
ath10kcal_extract "art" 20480 12064
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary mac 8) -1)