diff options
author | Roger Pueyo Centelles <roger.pueyo@guifi.net> | 2019-09-18 15:17:56 +0200 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-01-31 17:24:31 +0100 |
commit | 633c4304ad42d18d180ba65a264ba668de445d91 (patch) | |
tree | 1957b969b3183d88165c2d1688032173dfd6c47c /target/linux/ath79/dts/ar7100.dtsi | |
parent | 6c407fb5db02bc54de2098563c584509bec44432 (diff) | |
download | upstream-633c4304ad42d18d180ba65a264ba668de445d91.tar.gz upstream-633c4304ad42d18d180ba65a264ba668de445d91.tar.bz2 upstream-633c4304ad42d18d180ba65a264ba668de445d91.zip |
ath79: add support for Ubiquiti NanoStation Loco M (XW)
This commit adds support for the NanoStation Loco M2/M5 XW devices
on the ath79 target (support was long ago available on ar71xx).
Specifications:
- AR9342 SoC @ 535 MHz
- 64 MB RAM
- 8 MB SPI flash
- 1x 10/100 Mbps Ethernet, 24 Vdc PoE-in
- AR8032 switch
- 2T2R 5 GHz radio, 22 dBm
- 13 dBi built-in antenna
- POWER/LAN green LEDs
- 4x RSSI LEDs (red, orange, green, green)
- UART (115200 8N1) on PCB
Flashing via TFTP:
- Use a pointy tool (e.g., pen cap, paper clip) and keep the reset
button on the device or on the PoE supply pressed
- Power on the device via PoE (keep reset button pressed)
- Keep pressing until LEDs flash alternatively LED1+LED3 =>
LED2+LED4 => LED1+LED3, etc.
- Release reset button
- The device starts a TFTP server at 192.168.1.20
- Set a static IP on the computer (e.g., 192.168.1.21/24)
- Upload via tftp the factory image:
$ tftp 192.168.1.20
tftp> bin
tftp> trace
tftp> put openwrt-ath79-generic-xxxxx-ubnt_nanostation-loco-m-xw-squashfs-factory.bin
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Diffstat (limited to 'target/linux/ath79/dts/ar7100.dtsi')
0 files changed, 0 insertions, 0 deletions