ath79: reorganize DTSI for ar7240 TP-Link devices

The current set of TP-Link devices with ar7240 SoC all share
the same DTSI file. As the latter is very similar to the
definition required for the to-be-supported TP-Link TL-WA devices
with ar7240, this patch splits the definitions into a shared part
for all TP-Link devices (ar7240_tplink.dtsi) and a file containing
the specific setup for the present TL-WR devices
(ar7240_tplink_tl-wr.dtsi), equivalent to the former
ar7240_tplink_tl-wr74xn-v1.dtsi.

While at it, remove unused firmware partition label and rename
pinmux_switch_led_pins.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 158 deletions

diff --git a/target/linux/ath79/dts/ar7240_tplink_tl-wr74xn-v1.dtsi b/target/linux/ath79/dts/ar7240_tplink_tl-wr74xn-v1.dtsi
deleted file mode 100644
index 147fcad666..0000000000
--- a/target/linux/ath79/dts/ar7240_tplink_tl-wr74xn-v1.dtsi
+++ /dev/null
@@ -1,158 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar7240.dtsi"
-
-/ {
-	aliases {
-		led-boot = &led_system;
-		led-failsafe = &led_system;
-		led-running = &led_system;
-		led-upgrade = &led_system;
-		label-mac-device = &ath9k;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-
-		wps {
-			label = "wps";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&switch_led_pins>;
-
-		led_system: system {
-			label = "tp-link:green:system";
-			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-		};
-
-		qss {
-			label = "tp-link:green:qss";
-			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
-		};
-
-		lan1 {
-			label = "tp-link:green:lan1";
-			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-		};
-
-		lan2 {
-			label = "tp-link:green:lan2";
-			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-		};
-
-		lan3 {
-			label = "tp-link:green:lan3";
-			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-		};
-
-		lan4 {
-			label = "tp-link:green:lan4";
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-
-		wan {
-			label = "tp-link:green:wan";
-			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	ath9k-leds {
-		compatible = "gpio-leds";
-
-		wlan {
-			label = "tp-link:green:wlan";
-			gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "phy0tpt";
-		};
-	};
-};
-
-&spi {
-	status = "okay";
-
-	num-cs = <1>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <25000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			uboot: partition@0 {
-				reg = <0x0 0x20000>;
-				label = "u-boot";
-				read-only;
-			};
-
-			firmware: partition@20000 {
-				compatible = "tplink,firmware";
-				reg = <0x20000 0x3d0000>;
-				label = "firmware";
-			};
-
-			art: partition@3f0000 {
-				reg = <0x3f0000 0x10000>;
-				label = "art";
-				read-only;
-			};
-		};
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	mtd-mac-address = <&uboot 0x1fc00>;
-	mtd-mac-address-increment = <(-1)>;
-};
-
-&eth1 {
-	status = "okay";
-
-	mtd-mac-address = <&uboot 0x1fc00>;
-	mtd-mac-address-increment = <1>;
-};
-
-&pcie {
-	status = "okay";
-
-	ath9k: wifi@0,0 {
-		compatible = "pci168c,002b";
-		reg = <0x0000 0 0 0 0>;
-		qca,no-eeprom;
-		mtd-mac-address = <&uboot 0x1fc00>;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-};
-
-&pinmux {
-	switch_led_pins: pinmux_switch_led_pins {
-		pinctrl-single,bits = <0x0 0x0 0xf8>;
-	};
-};
-
-&uart {
-	status = "okay";
-};