diff options
| author | Roger Pueyo Centelles <roger.pueyo@guifi.net> | 2020-03-12 11:37:10 +0100 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-04-27 23:17:30 +0200 |
| commit | e210fe91b186ba5b229fd64d165a631810d60dac (patch) | |
| tree | 08bafb66e4939c7a39db014e558e2f539f2e7996 /target/linux/ath79/dts/ar7241_tplink_tl-mr3220-v1.dts | |
| parent | f0435d53439bdf2a329d2145e40b8e8e65508754 (diff) | |
| download | upstream-e210fe91b186ba5b229fd64d165a631810d60dac.tar.gz upstream-e210fe91b186ba5b229fd64d165a631810d60dac.tar.bz2 upstream-e210fe91b186ba5b229fd64d165a631810d60dac.zip | |
ath79: add support for Ubiquiti PowerBeam 5AC Gen2
The Ubiquiti PowerBeam 5AC Gen 2 (PBE-5AC-Gen2) is an outdoor 802.11ac
5 GHz bridge with a radio feed and a dish antenna. The device is
hardware-compatible with the LiteBeam AC Gen2, plus the 4 extra LEDs.
Specifications:
- SoC: Qualcomm Atheros AR9342 rev 2
- RAM: 64 MB DDR2
- Flash: 16 MB SPI NOR (mx25l12805d)
- Ethernet: 1x 10/100/1000 Mbps Atheros 8035, 24 Vdc PoE-in
- WiFi 5 GHz: QCA988x HW2.0 Ubiquiti target 0x4100016c chip_id 0x043222ff
- WiFi 2.4 GHz: Atheros AR9340 (SoC-based)
- Buttons: 1x (reset)
- LEDs: 1x power, 1x Ethernet, 4x RSSI via GPIO. All blue.
- UART: not tested
Installation from stock airOS firmware:
- Follow instructions for WA-type Ubiquiti devices on OpenWrt wiki
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
[changed device name in commit title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/dts/ar7241_tplink_tl-mr3220-v1.dts')
0 files changed, 0 insertions, 0 deletions