diff options
author | Cezary Jackiewicz <cezary@eko.one.pl> | 2018-04-19 19:34:22 +0200 |
---|---|---|
committer | Mathias Kresin <dev@kresin.me> | 2018-08-15 07:42:36 +0200 |
commit | 37af596593b0e84d0a076ab8f173066e3d7bc810 (patch) | |
tree | fc009e33abc46962259afc72a392f7023889ef47 /target/linux/ath79/dts/ar7241_tplink_tl-mr3x20.dtsi | |
parent | 4877ad44c718debfa75533aedaaf3dfd0faeb6f0 (diff) | |
download | upstream-37af596593b0e84d0a076ab8f173066e3d7bc810.tar.gz upstream-37af596593b0e84d0a076ab8f173066e3d7bc810.tar.bz2 upstream-37af596593b0e84d0a076ab8f173066e3d7bc810.zip |
ramips: add support for D-Link DWR-118-A2
The DWR-118-A2 Wireless Router is based on the MT7620A SoC.
Specification:
- MediaTek MT7620A (580 Mhz)
- 128 MB of RAM
- 16 MB of FLASH
- 1x 802.11bgn radio
- 1x 802.11ac radio (MT7612EN)
- 4x 10/100 Mbps Ethernet (1 WAN and 3 LAN)
- 1x 10/100/1000 Mbps Marvell Ethernet PHY (1 LAN)
- 2x external, non-detachable antennas
- 1x USB 2.0
- UART (J1) header on PCB (57600 8n1)
- 7x LED (5x GPIO-controlled), 2x button
- JBOOT bootloader
Known issues:
- GELAN not working
- flash is very slow
The status led has been assigned to the dwr-118-a2:green:internet led.
At the end of the boot it is switched off and is available for other
operation. Work correctly also during sysupgrade operation.
Installation:
Apply factory image via http web-gui or JBOOT recovery page
How to revert to OEM firmware:
- push the reset button and turn on the power. Wait until LED start
blinking (~10sec.)
- upload original factory image via JBOOT http (IP: 192.168.123.254)
Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Diffstat (limited to 'target/linux/ath79/dts/ar7241_tplink_tl-mr3x20.dtsi')
0 files changed, 0 insertions, 0 deletions