diff options
author | INAGAKI Hiroshi <musashino.open@gmail.com> | 2018-09-11 20:50:35 +0900 |
---|---|---|
committer | Mathias Kresin <dev@kresin.me> | 2018-09-26 20:35:07 +0200 |
commit | 81f7bdcb8d6284dbc291b7300c536359c8a528bd (patch) | |
tree | 133d6ac7fa7933791328631b06acdf2586a37c93 /target/linux/ath79/dts/ar7241_ubnt_bullet-m.dts | |
parent | 1df1ea4d7e8b6ae3351780ed58800ccd9edd4c27 (diff) | |
download | upstream-81f7bdcb8d6284dbc291b7300c536359c8a528bd.tar.gz upstream-81f7bdcb8d6284dbc291b7300c536359c8a528bd.tar.bz2 upstream-81f7bdcb8d6284dbc291b7300c536359c8a528bd.zip |
ath79: add support for Buffalo BHR-4GRV
Buffalo BHR-4GRV is a wired router, based on Atheros AR7242.
Specification:
- Atheros AR7242
- 64 MB of RAM
- 32 MB of Flash
- 2x 16 MB SPI-NOR flash
- 5x 10/100/1000 Mbps Ethernet
- 3x LEDs, 2x keys
- 1x USB 2.0 Type-A
- UART header on PCB
- JP1: Vcc, GND, TX, RX from reset button side
Flash instruction using factory image:
1. Boot the BHR-4GRV normaly and connect the computer to its LAN port
2. Access to
"http://192.168.11.1/cgi-bin/cgi?req=frm&frm=py-db/firmup.html"
with user "bufpy" and password "otdpopy"
3. Select the OpenWrt factory image and click "OK" button to perform
firmware upgrade
4. Wait ~200 seconds to complete flashing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/ath79/dts/ar7241_ubnt_bullet-m.dts')
0 files changed, 0 insertions, 0 deletions