diff options
author | Alex Maclean <monkeh@monkeh.net> | 2018-06-12 21:54:52 +0100 |
---|---|---|
committer | Mathias Kresin <dev@kresin.me> | 2018-06-16 10:08:51 +0200 |
commit | ab5b359876e8ee68500e104606d291e119116c6a (patch) | |
tree | 9d84251ffd03ea855208295181e124e87c8d7642 /target/linux/ath79/dts/ar9331_tl-wr703n_tl-mr10u.dtsi | |
parent | 3e0489dcd91faa3954a05e3fcdaf5de2d1892e67 (diff) | |
download | upstream-ab5b359876e8ee68500e104606d291e119116c6a.tar.gz upstream-ab5b359876e8ee68500e104606d291e119116c6a.tar.bz2 upstream-ab5b359876e8ee68500e104606d291e119116c6a.zip |
ath79: fixup TL-WR703N/TL-MR10U split
Readd SoC compatible strings and correct model names mangled in
a51078f7354fac9e31f6956cbddc77aaef02c67b, cleanup dts to remove
duplication, rename dtsi for clarity, use correct GPIO for TL-MR10U
USB power.
Tested only on TL-WR703N due to lack of a TL-MR10U.
Signed-off-by: Alex Maclean <monkeh@monkeh.net>
Diffstat (limited to 'target/linux/ath79/dts/ar9331_tl-wr703n_tl-mr10u.dtsi')
-rw-r--r-- | target/linux/ath79/dts/ar9331_tl-wr703n_tl-mr10u.dtsi | 135 |
1 files changed, 135 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar9331_tl-wr703n_tl-mr10u.dtsi b/target/linux/ath79/dts/ar9331_tl-wr703n_tl-mr10u.dtsi new file mode 100644 index 0000000000..8a82d80706 --- /dev/null +++ b/target/linux/ath79/dts/ar9331_tl-wr703n_tl-mr10u.dtsi @@ -0,0 +1,135 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "ar9331.dtsi" + +/ { + aliases { + serial0 = &uart; + led-status = &led_system; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led_system: system { + label = "tl-wr703n:blue:system"; + gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + }; + }; + + reg_usb_vbus: reg_usb_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + }; + +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + reg = <0x0 0x20000>; + label = "u-boot"; + read-only; + }; + + firmware: partition@20000 { + reg = <0x20000 0x3d0000>; + label = "firmware"; + }; + + art: partition@3f0000 { + reg = <0x3f0000 0x10000>; + label = "art"; + read-only; + }; + }; + }; +}; + +ð0 { + status = "okay"; + + phy-handle = <&phy4>; + + mtd-mac-address = <&uboot 0x1fc00>; + + gmac-config { + device = <&gmac>; + + switch-phy-addr-swap = <0>; + switch-phy-swap = <0>; + }; +}; + +&gpio { + status = "okay"; +}; + +&mdio0 { + status = "okay"; + + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "mii"; + }; +}; + +&uart { + status = "okay"; +}; + +&usb { + dr_mode = "host"; + vbus-supply = <®_usb_vbus>; + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&uboot 0x1fc00>; +}; |