aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/dts/ar9344_qxwlan_e750a-v4-8m.dts
diff options
context:
space:
mode:
authorPeng Zhang <sd20@qxwlan.com>2020-10-14 15:47:35 +0800
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-10-15 18:52:39 +0200
commit5666ca913a879e499dabb7364fff5e080abe8819 (patch)
treeb188891e5c559f722fc2f3e4b46d26d161a147bb /target/linux/ath79/dts/ar9344_qxwlan_e750a-v4-8m.dts
parentdec4a028ab6bdc0235ecda26ac9ad7072caf6b09 (diff)
downloadupstream-5666ca913a879e499dabb7364fff5e080abe8819.tar.gz
upstream-5666ca913a879e499dabb7364fff5e080abe8819.tar.bz2
upstream-5666ca913a879e499dabb7364fff5e080abe8819.zip
ath79: add support for Qxwlan E750A v4
Qxwlan E750A v4 is based on Qualcomm QCA9344. Specification: - 560/450/225 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 5G GHz (AR9344) - 2x 10/100 Mbps Ethernet (one port with PoE support) - 1x miniPCIe slot (USB 2.0 bus only) - 7x LED (6 driven by GPIO) - 1x button (reset) - 1x DC jack for main power input (9-48 V) - UART (J23) and LEDs (J2) headers on PCB Flash instruction: 1.Using tftp mode with UART connection and original LEDE image - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin" to "firmware.bin" and place it in tftp server directory. - Connect PC with one of LAN ports, power up the router and press key "Enter" to access U-Boot CLI. - Use the following commands to update the device to LEDE: run lfw - After that the device will reboot and boot to LEDE. - Wait until all LEDs stops flashing and use the router. 2.Using httpd mode with Web UI connection and original LEDE image - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server. - Connect PC with one of LAN ports,press the reset button, power up the router and keep button pressed for around 6-7 seconds, until leds flashing. - Open your browser and enter 192.168.1.1,You will see the upgrade interface, select "openwrt-ar71xx-generic-xxx-squashfs- sysupgrade.bin" and click the upgrade button. - After that the device will reboot and boot to LEDE. - Wait until all LEDs stops flashing and use the router. Signed-off-by: Peng Zhang <sd20@qxwlan.com> [cut out of bigger patch, alter use of DEVICE_VARIANT, merge case in 01_leds, use lower case for v4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/dts/ar9344_qxwlan_e750a-v4-8m.dts')
-rw-r--r--target/linux/ath79/dts/ar9344_qxwlan_e750a-v4-8m.dts49
1 files changed, 49 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar9344_qxwlan_e750a-v4-8m.dts b/target/linux/ath79/dts/ar9344_qxwlan_e750a-v4-8m.dts
new file mode 100644
index 0000000000..e232cdab24
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_qxwlan_e750a-v4-8m.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_qxwlan_e750x.dtsi"
+
+/ {
+ model = "Qxwlan E750A v4 8M";
+ compatible = "qxwlan,e750a-v4-8m", "qca,ar9344";
+};
+
+&leds {
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&pridata 0x400>;
+ mtd-mac-address-increment = <1>;
+};
+
+&eth1 {
+ status = "okay";
+
+ mtd-mac-address = <&pridata 0x400>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <0>;
+ switch-only-mode = <1>;
+ };
+};
+
+&partitions {
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0x790000>;
+ };
+};