diff options
author | Pawel Dembicki <paweldembicki@gmail.com> | 2018-03-19 19:15:29 +0100 |
---|---|---|
committer | Petr Štetiar <ynezz@true.cz> | 2019-03-24 01:44:24 +0100 |
commit | 67fced9ba336dd69c5a35aec3157db4b158a9e2d (patch) | |
tree | 1203504bb73e691a34c91a686dc051d88f17f913 /target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts | |
parent | 1f149fcad38677cc917d249e32b4b791cde95702 (diff) | |
download | upstream-67fced9ba336dd69c5a35aec3157db4b158a9e2d.tar.gz upstream-67fced9ba336dd69c5a35aec3157db4b158a9e2d.tar.bz2 upstream-67fced9ba336dd69c5a35aec3157db4b158a9e2d.zip |
ramips: add support for DLINK DIR-510L
The DIR-510L Wireless Router are based on the MT7620A SoC.
Specification:
-MediaTek MT7620A (580 Mhz)
-128 MB of RAM
-16 MB of FLASH
-802.11bgn radio
-1x 10/100 Mbps Ethernet
-2x internal, non-detachable antennas
-UART (J3) header on PCB (57600 8n1)
-1x bi-color LED (GPIO-controlled), 2x button
-JBOOT bootloader
Known issues:
-Ethernet port is used as LAN
-No communication with charger IC. (uart bitbang needed)
Installation:
Apply factory image via d-link http web-gui.
How to revert to OEM firmware:
1.) Push the reset button and turn on the power. Wait until LED start blinking (~10sec.)
2.) Upload original factory image via JBOOT http (IP: 192.168.123.254)
3.) If http doesn't work, it can be done with curl command:
curl -F FN=@XXXXX.bin http://192.168.123.254/upg
where XXXXX.bin is name of firmware file.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
[fixed whitespace issue in 10-rt2x00-eeprom]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts')
0 files changed, 0 insertions, 0 deletions