aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/dts/qca9558_comfast_cf-wr650ac.dtsi
diff options
context:
space:
mode:
authorManuel Giganto <mgigantoregistros@gmail.com>2019-09-16 10:25:23 +0000
committerChuanhong Guo <gch981213@gmail.com>2020-03-07 11:02:13 +0800
commitb2130b9ce841d9da2bf5a3d91191192d0c2ad44a (patch)
tree899f4bf49f57bc3fd20d1c6f31b69aa499073868 /target/linux/ath79/dts/qca9558_comfast_cf-wr650ac.dtsi
parent643cab4f315d2733a6694e4afd232fc13ad3a7c8 (diff)
downloadupstream-b2130b9ce841d9da2bf5a3d91191192d0c2ad44a.tar.gz
upstream-b2130b9ce841d9da2bf5a3d91191192d0c2ad44a.tar.bz2
upstream-b2130b9ce841d9da2bf5a3d91191192d0c2ad44a.zip
ath79: add support for Devolo Magic 2 WIFI
This patch support Devolo Magic 2 WIFI, board devolo_dlan2-2400-ac. This device is a plc wifi AC2400 router/extender with 2 Ethernet ports, has a G.hn PLC and uses LCMP protocol from Home Grid Forum. Hardware: SoC: AR9344 CPU: 560 MHz Flash: 16 MiB (W25Q128JVSIQ) RAM: 128 MiB DDR2 Ethernet: 2xLAN 10/100/1000 PLC: 88LX5152 (MaxLinear G.hn) PLC Flash: W25Q32JVSSIQ PLC Uplink: 1Gbps MIMO PLC Link: RGMII 1Gbps (WAN) WiFi: Atheros AR9340 2.4GHz 802.11bgn Atheros AR9882-BR4A 5GHz 802.11ac Switch: QCA8337, Port0:CPU, Port2:PLC, Port3:LAN1, Port4:LAN2 Button: 3x Buttons (Reset, wifi and plc) LED: 3x Leds (wifi, plc white, plc red) GPIO Switch: 11-PLC Pairing (Active Low) 13-PLC Enable 21-WLAN power MACs Details verified with the stock firmware: Radio1: 2.4 GHz &wmac *:4c Art location: 0x1002 Radio0: 5.0 GHz &pcie *:4d Art location: 0x5006 Ethernet &ethernet *:4e = 2.4 GHz + 2 PLC uplink --- *:4f = 2.4 GHz + 3 Label MAC address is from PLC uplink OEM SSID: echo devolo-$(grep SerialNumber /dev/mtd1 | grep -o ...$) OEM WiFi password: grep DlanSecurityID /dev/mtd1|tr -d -|cut -d'=' -f 2 Recommendations: Configure and link your PLC with OEM firmware BEFORE you flash the device. PLC configuration/link should remain in different memory and should work straight forward after flashing. Restrictions: PLC link detection to trigger plc red led is not available. PLC G.hn chip is not compatible with open-plc-tools, it uses LCMP protocol with AES-128 and requires different software. Notes: Pairing should be possible with gpio switch. Default configuration will trigger wifi led with 2.4Ghz wifi traffic and plc white led with wan traffic. Flash instruction (TFTP): 1. Set PC to fixed ip address 192.168.0.100 2. Download the sysupgrade image and rename it to uploadfile 3. Start a tftp server with the image file in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Allow 1-2 minutes for the first boot. Signed-off-by: Manuel Giganto <mgigantoregistros@gmail.com>
Diffstat (limited to 'target/linux/ath79/dts/qca9558_comfast_cf-wr650ac.dtsi')
0 files changed, 0 insertions, 0 deletions