aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/dts
diff options
context:
space:
mode:
authorRussell Senior <russell@personaltelco.net>2021-06-04 17:27:48 -0700
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2021-07-04 14:42:08 +0200
commit12eb5b2384a63427c0062856331fda60a1ebb309 (patch)
tree8bda302c39f821e56ab52ffea63bf68c49d7c681 /target/linux/ath79/dts
parent3c3a96df3ff51d99f608be435dfe3d25231ff845 (diff)
downloadupstream-12eb5b2384a63427c0062856331fda60a1ebb309.tar.gz
upstream-12eb5b2384a63427c0062856331fda60a1ebb309.tar.bz2
upstream-12eb5b2384a63427c0062856331fda60a1ebb309.zip
ath79: add support for Ubiquiti PowerBeam M (XW)
This patch adds support for the Ubiquiti PowerBeam M (XW), e.g. PBE-M5-400, a 802.11n wireless with a feed+dish form factor. This device was previously supported by the ar71xx loco-m-xw firmware. Specifications: - Atheros AR9342 SoC - 64 MB RAM - 8 MB SPI flash - 1x 10/100 Mbps Ethernet port, 24 Vdc PoE-in - Power and LAN green LEDs - 4x RSSI LEDs (red, orange, green, green) - UART (115200 8N1) Flashing via stock GUI: - Downgrade to AirOS v5.5.x (latest available is 5.5.10-u2) first (see https://openwrt.org/toh/ubiquiti/powerbeam installation instructions) - Upload the factory image via AirOS web GUI. Flashing via TFTP: - Use a pointy tool (e.g., unbent paperclip) to keep the reset button pressed. - Power on the device (keep reset button pressed). - Keep pressing until LEDs flash alternatively LED1+LED3 => LED2+LED4 => LED1+LED3, etc. - Release reset button. - The device starts a TFTP server at 192.168.1.20. - Set a static IP on the computer (e.g., 192.168.1.21/24). - Upload via tftp the factory image: $ tftp 192.168.1.20 tftp> bin tftp> trace tftp> put openwrt-ath79-generic-xxxxx-ubnt_powerbeam-m-xw-squashfs-factory.bin WARNING: so far, no non-destructive method has been discovered for opening the enclosure to reach the serial console. Internal photos are available here: https://fcc.io/SWX-NBM5HP Signed-off-by: Russell Senior <russell@personaltelco.net>
Diffstat (limited to 'target/linux/ath79/dts')
-rw-r--r--target/linux/ath79/dts/ar9342_ubnt_powerbeam-m-xw.dts34
1 files changed, 34 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar9342_ubnt_powerbeam-m-xw.dts b/target/linux/ath79/dts/ar9342_ubnt_powerbeam-m-xw.dts
new file mode 100644
index 0000000000..6db058f887
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_ubnt_powerbeam-m-xw.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9342_ubnt_xw.dtsi"
+
+/ {
+ compatible = "ubnt,powerbeam-m-xw", "ubnt,xw", "qca,ar9342";
+ model = "Ubiquiti PowerBeam M (XW)";
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <4>;
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ /* default for ar934x, except for 1000M and 10M */
+ pll-data = <0x02000000 0x00000101 0x00001313>;
+
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy4>;
+
+ gmac-config {
+ device = <&gmac>;
+ rxd-delay = <3>;
+ rxdv-delay = <3>;
+ };
+};