aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/dts
diff options
context:
space:
mode:
authorSebastian Schaper <openwrt@sebastianschaper.net>2020-11-30 20:09:29 +0100
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2021-01-04 01:09:32 +0100
commit8ae2ee99c60382f9f5130009397fd36e40900447 (patch)
tree89ab34d00861e52d360e447bbdafc94f4c83da48 /target/linux/ath79/dts
parent5b58710fad2137eedad874f0fe8fe22082d1edc6 (diff)
downloadupstream-8ae2ee99c60382f9f5130009397fd36e40900447.tar.gz
upstream-8ae2ee99c60382f9f5130009397fd36e40900447.tar.bz2
upstream-8ae2ee99c60382f9f5130009397fd36e40900447.zip
ath79: add support for D-Link DAP-3320 A1
Specifications: * QCA9533, 16 MiB Flash, 64 MiB RAM, 802.11n 2T2R * 10/100 Ethernet Port, 802.11af PoE * IP55 pole-mountable outdoor case Installation: * Factory Web UI is at 192.168.0.50 login with 'admin' and blank password, flash factory.bin * Recovery Web UI is at 192.168.0.50 connect network cable, hold reset button during power-on and keep it pressed until uploading has started (only required when checksum is ok, e.g. for reverting back to oem firmware), flash factory.bin After flashing factory.bin, additional free space can be reclaimed by flashing sysupgrade.bin, since the factory image requires some padding to be accepted for upgrading via OEM Web UI. Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
Diffstat (limited to 'target/linux/ath79/dts')
-rw-r--r--target/linux/ath79/dts/qca9533_dlink_dap-3320-a1.dts56
1 files changed, 56 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/qca9533_dlink_dap-3320-a1.dts b/target/linux/ath79/dts/qca9533_dlink_dap-3320-a1.dts
new file mode 100644
index 0000000000..97f2f62b4a
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_dlink_dap-3320-a1.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+#include "qca95xx_dlink_dap-2xxx.dtsi"
+
+/ {
+ compatible = "dlink,dap-3320-a1", "qca,qca9533";
+ model = "D-Link DAP-3320 A1";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+};
+
+&partitions {
+ partition@70000 {
+ label = "firmware";
+ reg = <0x70000 0xef0000>;
+ compatible = "wrg";
+ };
+
+ partition@f60000 {
+ label = "dlink";
+ reg = <0xf60000 0x90000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+};