aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/dts
diff options
context:
space:
mode:
authorDaniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>2018-08-31 19:28:35 -0700
committerPetr Štetiar <ynezz@true.cz>2019-07-17 22:59:29 +0200
commitbc18c2bfe7a80630eea15aa71800b0829ce32634 (patch)
tree8c0be4b88f8b3b7205e0e3bf4ee2696889f0a961 /target/linux/ath79/dts
parenta9fa91d200d6427ca6b8e6637cb7a2e8c59d18af (diff)
downloadupstream-bc18c2bfe7a80630eea15aa71800b0829ce32634.tar.gz
upstream-bc18c2bfe7a80630eea15aa71800b0829ce32634.tar.bz2
upstream-bc18c2bfe7a80630eea15aa71800b0829ce32634.zip
ath79: add support for Bluesocket BSAP1880 board
This board was used in dual-band 802.11n enterprise access points, models BSAP-1800v2 and BSAP-1840, introduced in 2010 by Bluesocket, which was acquired by Adtran in 2011, who has now EOL'ed them. They differed only in that the BSAP-1840's antennae were detachable, while the BSAP-1800v2's were inside the case. They have an external RJ-45 console port, which works with standard Cisco 72-3383-01 console cables. Specification: - System-On-Chip: AR7161 - CPU/Speed: 600 MHz - Flash-Chip: Macronix MX25L12845E - Flash size: 16 MiB - RAM: 64 MiB - Wireless No1: Lite-On WN2601A card: AR9160/AR9103 2.4GHz 802.11bgn - Wireless No2: Lite-On WN2502A card: AR9160/AR9106 5GHz 802.11an - PHY: Vitesse VSC8601, Rev. B Installation: 1. Connect to the serial console using a terminal that supports YMODEM at 115200 bps, 8 data bits, no parity, 1 stop bit 2. Interrupt the bootloader using its password, which is: r00t 3. Issue the "fis init" command, confirming if prompted 4. Look at the length of the openwrt-ath79-generic-*-squashfs-kernel.bin file, and substitute it below, instead of where I have "LeNgTh" 5. Issue the following command, and upload this file using YMODEM protocol load -r -v -b 0x80060000 -m ymodem 6. Issue the following commands, substituting as mentioned above: fis create -b 0x80060000 -l LeNgTh vmlinux_2 load -r -v -b 0x80100000 -m ymodem 7. Using YMODEM, upload openwrt-ath79-generic-*-squashfs-rootfs.bin 8. Issue the "fis free" command, and for the first range in its response, use a hexadecimal calculator to subtract the start from the end in order to substitute it below, with the leading "0x" to specify it in hexadecimal, instead of where I have "LeNgTh" 9. Issue the following commands, substituting as mentioned above: fis create -b 0x80100000 -l LeNgTh -e 0 -r 0 rootfs reset 10.Wait for the status LED to go solid green Tested-by: Brian Gonyer <bgonyer@gmail.com> Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> [fixed obsolete $ARGV in platform_do_upgrade] Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/ath79/dts')
-rw-r--r--target/linux/ath79/dts/ar7161_adtran_bsap1800-v2.dts9
-rw-r--r--target/linux/ath79/dts/ar7161_adtran_bsap1840.dts9
-rw-r--r--target/linux/ath79/dts/ar7161_adtran_bsap1880.dtsi99
3 files changed, 117 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar7161_adtran_bsap1800-v2.dts b/target/linux/ath79/dts/ar7161_adtran_bsap1800-v2.dts
new file mode 100644
index 0000000000..1745ac76fb
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_adtran_bsap1800-v2.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar7161_adtran_bsap1880.dtsi"
+
+/ {
+ model = "Adtran/Bluesocket BSAP-1800 v2";
+ compatible = "adtran,bsap1800-v2", "qca,ar7161";
+};
diff --git a/target/linux/ath79/dts/ar7161_adtran_bsap1840.dts b/target/linux/ath79/dts/ar7161_adtran_bsap1840.dts
new file mode 100644
index 0000000000..38b87a1e32
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_adtran_bsap1840.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar7161_adtran_bsap1880.dtsi"
+
+/ {
+ model = "Adtran/Bluesocket BSAP-1840";
+ compatible = "adtran,bsap1840", "qca,ar7161";
+};
diff --git a/target/linux/ath79/dts/ar7161_adtran_bsap1880.dtsi b/target/linux/ath79/dts/ar7161_adtran_bsap1880.dtsi
new file mode 100644
index 0000000000..ba9b588bec
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_adtran_bsap1880.dtsi
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar7100.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &led_green_status;
+ led-failsafe = &led_yellow_status;
+ led-running = &led_green_status;
+ led-upgrade = &led_yellow_status;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan5g {
+ label = "bluesocket:green:wifi5g";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan2g {
+ label = "bluesocket:green:wifi2g";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_green_status: green_status {
+ label = "bluesocket:green:status";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ led_yellow_status: yellow_status {
+ label = "bluesocket:yellow:status";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0x1>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy0>;
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ecoscentric,redboot-fis-partitions";
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};