diff options
| author | Roberto Valentini <valantin89@gmail.com> | 2021-07-01 11:56:30 +0200 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2021-07-11 16:58:12 +0200 |
| commit | af56075a8ff760832df27546325428f2497a0121 (patch) | |
| tree | 10adbb81fee0b99358d8439a2141253eae8b259c /target/linux/ath79/generic/base-files/etc/board.d/01_leds | |
| parent | 0c721434ea56044cdc1c13554c970b82471bc43e (diff) | |
| download | upstream-af56075a8ff760832df27546325428f2497a0121.tar.gz upstream-af56075a8ff760832df27546325428f2497a0121.tar.bz2 upstream-af56075a8ff760832df27546325428f2497a0121.zip | |
ath79: add support for TP-Link RE455 v1
TP-Link RE455 v1 is a dual band router/range-extender based on
Qualcomm/Atheros QCA9563 + QCA9880.
This device is nearly identical to RE450 v3
Specification:
- 775 MHz CPU
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 3T3R 5 GHz
- 1x 10/100/1000 Mbps Ethernet (AR8033 PHY)
- 7x LED, 4x button
- UART header on PCB[1]
Flash instruction:
Apply factory image in OEM firmware web-gui.
[1] Didn't work, probably need to short unpopulated resistor R64
and R69 as RE450v3
Signed-off-by: Roberto Valentini <valantin89@gmail.com>
Diffstat (limited to 'target/linux/ath79/generic/base-files/etc/board.d/01_leds')
| -rw-r--r-- | target/linux/ath79/generic/base-files/etc/board.d/01_leds | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 890b38e58a..5e5ccca32f 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -352,7 +352,8 @@ tplink,tl-wr902ac-v1) tplink,re355-v1|\ tplink,re450-v1|\ tplink,re450-v2|\ -tplink,re450-v3) +tplink,re450-v3|\ +tplink,re455-v1) ucidef_set_led_netdev "lan_data" "LAN Data" "green:lan_data" "eth0" "tx rx" ucidef_set_led_netdev "lan_link" "LAN Link" "green:lan_link" "eth0" "link" ;; |