diff options
| author | Andrew Cameron <apcameron@softhome.net> | 2019-10-25 20:29:36 -0500 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2019-11-06 13:37:40 +0100 |
| commit | bae0d47f2e36376d2876bc4d5557e3e11f80f2fb (patch) | |
| tree | e93c9fcf7d01d5a80afde9dcdfd8c94ff5cf9192 /target/linux/ath79/generic | |
| parent | d2b9333ea90ed89069879b4a676211c72c859f9b (diff) | |
| download | upstream-bae0d47f2e36376d2876bc4d5557e3e11f80f2fb.tar.gz upstream-bae0d47f2e36376d2876bc4d5557e3e11f80f2fb.tar.bz2 upstream-bae0d47f2e36376d2876bc4d5557e3e11f80f2fb.zip | |
ath79: add support for the TP-LINK CPE220 V3
This adds support for a popular low-cost 2.4GHz N based AP
Specifications:
SoC: Qualcomm Atheros QCA9533 (650MHz)
RAM: 64MB
Storage: 8 MB SPI NOR
Wireless: 2.4GHz N based built into SoC 2x2
Ethernet: 2x 100/10 Mbps, integrated into SoC
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
This also applies some minor changes to the common DTSI:
- use &wmac for label-mac-device, as this one is actually set up in
common DTSI
- move ð0 to parent DTSI
- fix several leading spaces, added/removed newlines
Signed-off-by: Andrew Cameron <apcameron@softhome.net>
[DTS style fixes/improvements, updated commit message/title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/generic')
3 files changed, 3 insertions, 0 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index fbb0d0ea03..de2c8e9197 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -173,6 +173,7 @@ tplink,archer-d50-v1) ;; tplink,cpe210-v1|\ tplink,cpe220-v2|\ +tplink,cpe220-v3|\ tplink,cpe510-v1|\ tplink,wbs210-v2) ucidef_set_led_netdev "lan0" "LAN0" "tp-link:green:lan0" "eth1" diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 10ca213e70..34f6e31047 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -89,6 +89,7 @@ ath79_setup_interfaces() comfast,cf-e314n-v2|\ tplink,cpe210-v1|\ tplink,cpe220-v2|\ + tplink,cpe220-v3|\ tplink,cpe510-v1|\ tplink,wbs210-v2|\ ubnt,nanostation-m|\ diff --git a/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches index 4d6277c223..04206f4a58 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches @@ -44,6 +44,7 @@ tplink,archer-c25-v1) ;; tplink,cpe210-v1|\ tplink,cpe220-v2|\ +tplink,cpe220-v3|\ tplink,cpe510-v1|\ tplink,wbs210-v2) ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20" |