aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/image/generic-ubnt.mk
diff options
context:
space:
mode:
author张鹏 <sd20@qxwlan.com>2020-10-14 15:47:35 +0800
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-10-17 20:17:59 +0200
commit27a7d071c0e0576eddeb641d1f68abe1b6205aee (patch)
tree8feb827e45947f8c09709242f54f03529171b45c /target/linux/ath79/image/generic-ubnt.mk
parent4a0688ed71532a3dd68907f5603177d970e4ec03 (diff)
downloadupstream-27a7d071c0e0576eddeb641d1f68abe1b6205aee.tar.gz
upstream-27a7d071c0e0576eddeb641d1f68abe1b6205aee.tar.bz2
upstream-27a7d071c0e0576eddeb641d1f68abe1b6205aee.zip
ath79: add support for Qxwlan E750G v8
Qxwlan E750G v8 is based on Qualcomm QCA9344 + QCA9334. Specification: - 560/450/225 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4G GHz (AR9344) - 2x 10/100/1000 Mbps Ethernet (one port with PoE support) - 7x LED (6 driven by GPIO) - 1x button (reset) - 1x DC jack for main power input (9-48 V) - UART (J23) and LEDs (J2) headers on PCB Flash instruction: 1.Using tftp mode with UART connection and original LEDE image - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin" to "firmware.bin" and place it in tftp server directory. - Connect PC with one of LAN ports, power up the router and press key "Enter" to access U-Boot CLI. - Use the following commands to update the device to LEDE: run lfw - After that the device will reboot and boot to LEDE. - Wait until all LEDs stops flashing and use the router. 2.Using httpd mode with Web UI connection and original LEDE image - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server. - Connect PC with one of LAN ports,press the reset button, power up the router and keep button pressed for around 6-7 seconds, until leds flashing. - Open your browser and enter 192.168.1.1,You will see the upgrade interface, select "openwrt-ar71xx-generic-xxx-squashfs- sysupgrade.bin" and click the upgrade button. - After that the device will reboot and boot to LEDE. - Wait until all LEDs stops flashing and use the router. Signed-off-by: 张鹏 <sd20@qxwlan.com> [cut out of bigger patch, keep swconfig] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/image/generic-ubnt.mk')
0 files changed, 0 insertions, 0 deletions