diff options
| author | Luochongjun <luochongjun@gl-inet.com> | 2020-07-11 20:58:47 +0800 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-07-29 20:49:48 +0200 |
| commit | 68ac3f2cddab8422d7de0ce1a78d23edf29012e7 (patch) | |
| tree | e1eac5a94468efa87c84dec6b1a4466edc4b70f2 /target/linux/ath79/nand/base-files | |
| parent | eda3da56a6847f94aaff42a493166670853b8bc6 (diff) | |
| download | upstream-68ac3f2cddab8422d7de0ce1a78d23edf29012e7.tar.gz upstream-68ac3f2cddab8422d7de0ce1a78d23edf29012e7.tar.bz2 upstream-68ac3f2cddab8422d7de0ce1a78d23edf29012e7.zip | |
ath79: add support for gl-e750
The gl-e750 is a portable travel router that gives you safe access to
the internet while traveling.
Specifications:
- SoC: Qualcomm Atheros AR9531 (650MHz)
- RAM: 128 MB DDR2
- Flash: 16 MB SPI NOR (W25Q128FVSG) + 128 MB SPI NAND (GD5F1GQ4UFYIG)
- Ethernet: 10/100: 1xLAN
- Wireless: QCA9531 2.4GHz (bgn) + QCA9887 5GHz (ac)
- USB: 1x USB 2.0 port
- Switch: 1x switch
- Button: 1x reset button
- OLED Screen: 128*64 px
MAC addresses based on vendor firmware:
LAN *:a0 art 0x0
2.4GHz *:a1 art 0x1002
5GHz *:a2 art calculated from art 0x0 + 2
Flash firmware:
Since openwrt's kernel already exceeds 2MB, upgrading from the official
version of GL-inet (v3.100) using the sysupgrade command will break the
kernel image. Users who are using version 3.100 can only upgrade via
uboot. The official guidance for GL-inet is as follows:
https://docs.gl-inet.com/en/3/troubleshooting/debrick/
In the future, GL-inet will modify the firmware to support the sysupgrade
command, so users will be able to upgrade directly with the sysupgrade
command in future releases.
OLED screen control:
OLED controller is connected to QCA9531 through serial port, and can send
instructions to OLED controller directly through serial port.
Refer to the links below for a list of supported instructions:
https://github.com/gl-inet/GL-E750-MCU-instruction
Signed-off-by: Luochongjun <luochongjun@gl-inet.com>
[fix alphabetic sorting in 10-fix-wifi-mac, drop check-kernel-size]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/nand/base-files')
| -rwxr-xr-x | target/linux/ath79/nand/base-files/etc/board.d/02_network | 3 | ||||
| -rw-r--r-- | target/linux/ath79/nand/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac | 5 |
2 files changed, 7 insertions, 1 deletions
diff --git a/target/linux/ath79/nand/base-files/etc/board.d/02_network b/target/linux/ath79/nand/base-files/etc/board.d/02_network index 84cdfd99bb..daba0e9679 100755 --- a/target/linux/ath79/nand/base-files/etc/board.d/02_network +++ b/target/linux/ath79/nand/base-files/etc/board.d/02_network @@ -8,7 +8,8 @@ ath79_setup_interfaces() local board="$1" case "$board" in - aerohive,hiveap-121) + aerohive,hiveap-121|\ + glinet,gl-e750) ucidef_set_interface_lan "eth0" ;; domywifi,dw33d) diff --git a/target/linux/ath79/nand/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac b/target/linux/ath79/nand/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac index 6c61e5df00..730a5f9943 100644 --- a/target/linux/ath79/nand/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac +++ b/target/linux/ath79/nand/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac @@ -10,6 +10,11 @@ PHYNBR=${DEVPATH##*/phy} board=$(board_name) case $board in + glinet,gl-e750) + # Set mac address for 5g device + [ "$PHYNBR" -eq 0 ] && \ + macaddr_add $(mtd_get_mac_binary art 0x0) 2 > /sys${DEVPATH}/macaddress + ;; zyxel,nbg6716) # Set mac address for 2.4g device [ "$PHYNBR" -eq 1 ] && \ |