aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79
diff options
context:
space:
mode:
authorINAGAKI Hiroshi <musashino.open@gmail.com>2018-09-11 20:13:17 +0900
committerMathias Kresin <dev@kresin.me>2018-09-26 20:35:07 +0200
commit1df1ea4d7e8b6ae3351780ed58800ccd9edd4c27 (patch)
tree0ec309cb5d905e9de750ff4f2259de68bb3f8ba4 /target/linux/ath79
parentb6e6785c88abe5183a6c8ebcd20e1175933883d5 (diff)
downloadupstream-1df1ea4d7e8b6ae3351780ed58800ccd9edd4c27.tar.gz
upstream-1df1ea4d7e8b6ae3351780ed58800ccd9edd4c27.tar.bz2
upstream-1df1ea4d7e8b6ae3351780ed58800ccd9edd4c27.zip
ath79: fix support for Buffalo WZR-HP-G450H and split to dts/dtsi
There are many parts that are incorrect or missing in the current code for Buffalo WZR-HP-G450H in ath79, so its support is broken. I fixed that issues and split to dts/dtsi files to add support for Buffalo BHR-4GRV. And WZR-450HP has the same hardware as WZR-HP-G450H, so I change the device name to "WZR-HP-G450H/WZR-450HP". Specification: - Atheros AR7242 - 64 MB of RAM - 32 MB of Flash - 2x 16 MB SPI-NOR flash - 3T3R 2.4 GHz wifi - SoC internal - 5x 10/100/1000 Mbps Ethernet - 6x LEDs, 5x keys - 1x USB 2.0 Type-A - UART header on PCB - JP1: Vcc, GND, TX, RX from reset button side Flash instruction using factory image: 1. Boot the WZR-HP-G450H (or WZR-450HP) normaly and connect the computer to its LAN port 2. Access to "http://192.168.11.1/cgi-bin/cgi?req=frm&frm=py-db/firmup.html" with user "bufpy" and password "otdpopy" 3. Select the OpenWrt factory image and click "OK" button to perform firmware update 4. Wait ~200 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/ath79')
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom3
-rw-r--r--target/linux/ath79/dts/ar7242_buffalo_wzr-bhr.dtsi174
-rw-r--r--target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts123
-rw-r--r--target/linux/ath79/image/generic.mk6
4 files changed, 225 insertions, 81 deletions
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 334e7056cf..8bcdb30272 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -120,6 +120,9 @@ case "$FIRMWARE" in
tplink,tl-wr941-v4)
ath9k_eeprom_extract "art" 4096 3768
;;
+ buffalo,wzr-hp-g450h)
+ ath9k_eeprom_extract "ART" 4096 1088
+ ;;
ocedo,raccoon|\
tplink,tl-wdr3600|\
tplink,tl-wdr4300|\
diff --git a/target/linux/ath79/dts/ar7242_buffalo_wzr-bhr.dtsi b/target/linux/ath79/dts/ar7242_buffalo_wzr-bhr.dtsi
new file mode 100644
index 0000000000..c82cf83f7e
--- /dev/null
+++ b/target/linux/ath79/dts/ar7242_buffalo_wzr-bhr.dtsi
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar7242.dtsi"
+
+/ {
+ aliases {
+ led-boot = &diag;
+ led-failsafe = &diag;
+ led-upgrade = &diag;
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+
+ keys: keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ usb {
+ label = "usb";
+ linux,code = <BTN_2>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ sec_vpn: sec_vpn {
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ diag: diag {
+ label = "buffalo:red:diag";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ usb {
+ label = "buffalo:green:usb";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ gpio_usb_power {
+ gpio-export,name = "buffalo:usb-power";
+ gpio-export,output = <1>;
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ virtual_flash {
+ compatible = "mtd-concat";
+ devices = <&flash0 &flash1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x40000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@40000 {
+ reg = <0x40000 0x10000>;
+ label = "u-boot-env";
+ };
+
+ ART: partition@50000 {
+ reg = <0x50000 0x10000>;
+ label = "ART";
+ read-only;
+ };
+
+ partition@60000 {
+ reg = <0x60000 0x1f80000>;
+ label = "firmware";
+ };
+
+ partition@1fe0000 {
+ reg = <0x1fe0000 0x20000>;
+ label = "user_property";
+ read-only;
+ };
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+ cs-gpios = <0>, <0>;
+ num-cs = <2>;
+
+ flash0: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ };
+
+ flash1: flash@1 {
+ compatible = "jedec,spi-nor";
+ reg = <1>;
+ spi-max-frequency = <25000000>;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0x1>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ mtd-mac-address = <&ART 0x1002>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+};
+
+&pll {
+ clocks = <&extosc>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
diff --git a/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts b/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts
index 8ff2c71952..804132dcfd 100644
--- a/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts
+++ b/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts
@@ -4,111 +4,74 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include "ar7242.dtsi"
+#include "ar7242_buffalo_wzr-bhr.dtsi"
/ {
compatible = "buffalo,wzr-hp-g450h", "qca,ar7242";
- model = "Buffalo WZR-HP-G450H";
+ model = "Buffalo WZR-HP-G450H/WZR-450HP";
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- usb {
- linux,code = <BTN_2>;
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- reset {
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- movie_engine {
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
- debounce-interval = <60>;
- };
-
- aoss {
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- router_off {
- linux,code = <BTN_5>;
- gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
- debounce-interval = <60>;
- };
- };
-
- leds {
+ ath9k-leds {
compatible = "gpio-leds";
- security {
- label = "buffalo:orange:security";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- };
- diag {
- label = "buffalo:red:diag";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ led_movie_engine {
+ label = "buffalo:blue:movie_engine";
+ gpios = <&ath9k 13 GPIO_ACTIVE_LOW>;
+ default-state = "off";
};
- };
- gpio-export {
- compatible = "gpio-export";
- #size-cells = <0>;
+ router {
+ label = "buffalo:green:router";
+ gpios = <&ath9k 14 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
- gpio_usb_power {
- gpio-export,name = "wzr-hp-g450h:usb-power";
- gpio-export,output = <1>;
- gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ wireless {
+ label = "buffalo:green:wireless";
+ gpios = <&ath9k 15 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
};
};
};
-&mdio0 {
- status = "okay";
- phy-mask = <0x1>;
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "rgmii";
+&keys {
+ movie_engine {
+ label = "movie_engine";
+ linux,code = <BTN_6>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
};
-};
-
-&eth0 {
- status = "okay";
-
- phy-mode = "rgmii";
- pll-data = <0x62000000 0 0>;
- fixed-link {
- speed = <1000>;
- full-duplex;
+ aoss {
+ label = "aoss";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
};
-};
-
-&uart {
- status = "okay";
-};
-&usb_phy {
- status = "okay";
+ router_off {
+ label = "router_off";
+ linux,code = <BTN_5>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
};
-&usb {
- status = "okay";
+&sec_vpn {
+ label = "buffalo:orange:security";
};
&pcie {
status = "okay";
- wifi@0,0 {
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,0030";
reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&ART 0x1002>;
qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
};
};
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 2727fb6ca1..91325cf4d4 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -84,9 +84,13 @@ TARGET_DEVICES += buffalo_wzr-hp-ag300h
define Device/buffalo_wzr-hp-g450h
ATH_SOC := ar7242
- DEVICE_TITLE := Buffalo WZR-HP-G450H
+ DEVICE_TITLE := Buffalo WZR-HP-G450H/WZR-450HP
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
IMAGE_SIZE := 32256k
+ IMAGES += factory.bin tftp.bin
+ IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-G450H 1.99 | buffalo-tag WZR-HP-G450H
+ IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header
SUPPORTED_DEVICES += wzr-hp-g450h
endef
TARGET_DEVICES += buffalo_wzr-hp-g450h