aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2021-02-17 01:29:44 +0100
committerDavid Bauer <mail@david-bauer.net>2021-02-20 01:26:33 +0100
commitd6b785d47739a84611088ab26256fa5808d06a9d (patch)
treed45ffa6e6182ce80ec35663de8c514888655e1b8 /target/linux/ath79
parentfb64e2c30f0cba887d3b183ce52de36b3e8bbb7e (diff)
downloadupstream-d6b785d47739a84611088ab26256fa5808d06a9d.tar.gz
upstream-d6b785d47739a84611088ab26256fa5808d06a9d.tar.bz2
upstream-d6b785d47739a84611088ab26256fa5808d06a9d.zip
ath79: add kernel 5.10 support
This adds Kernel 5.10 support for the generic, nand and tiny subtargets. The following patch is not contained, as it needs to be reworked: platform/920-mikrotik-rb4xx.patch Tested-on: - Siemens WS-AP3610 - Enterasys WS-AP3710 - Aerohive HiveAP 121 - TP-Link TL-WA901 v2 - TP-Link TL-WR741 v1 Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ath79')
-rw-r--r--target/linux/ath79/Makefile1
-rw-r--r--target/linux/ath79/config-5.10199
-rw-r--r--target/linux/ath79/generic/target.mk2
-rw-r--r--target/linux/ath79/nand/target.mk2
-rw-r--r--target/linux/ath79/patches-5.10/0003-leds-add-reset-controller-based-driver.patch186
-rw-r--r--target/linux/ath79/patches-5.10/0004-phy-add-ath79-usb-phys.patch333
-rw-r--r--target/linux/ath79/patches-5.10/0005-usb-add-more-OF-quirk-properties.patch24
-rw-r--r--target/linux/ath79/patches-5.10/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch168
-rw-r--r--target/linux/ath79/patches-5.10/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch23
-rw-r--r--target/linux/ath79/patches-5.10/0017-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch57
-rw-r--r--target/linux/ath79/patches-5.10/0018-MIPS-pci-ar71xx-convert-to-OF.patch202
-rw-r--r--target/linux/ath79/patches-5.10/0019-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch61
-rw-r--r--target/linux/ath79/patches-5.10/0020-MIPS-pci-ar724x-convert-to-OF.patch205
-rw-r--r--target/linux/ath79/patches-5.10/0032-MIPS-ath79-sanitize-symbols.patch93
-rw-r--r--target/linux/ath79/patches-5.10/0033-spi-ath79-drop-pdata-support.patch71
-rw-r--r--target/linux/ath79/patches-5.10/0034-MIPS-ath79-ath9k-exports.patch27
-rw-r--r--target/linux/ath79/patches-5.10/0036-GPIO-add-named-gpio-exports.patch165
-rw-r--r--target/linux/ath79/patches-5.10/0036-MIPS-ath79-remove-irq-code-from-pci.patch139
-rw-r--r--target/linux/ath79/patches-5.10/0037-missing-registers.patch21
-rw-r--r--target/linux/ath79/patches-5.10/0038-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch90
-rw-r--r--target/linux/ath79/patches-5.10/0039-MIPS-ath79-export-UART1-reference-clock.patch52
-rw-r--r--target/linux/ath79/patches-5.10/004-register_gpio_driver_earlier.patch18
-rw-r--r--target/linux/ath79/patches-5.10/0050-spi-ath79-remove-spi-master-setup-and-cleanup-assign.patch28
-rw-r--r--target/linux/ath79/patches-5.10/0051-spi-ath79-always-call-chipselect-function.patch21
-rw-r--r--target/linux/ath79/patches-5.10/0052-mtd-spi-nor-add-block-protection-flags-to-macronix.patch26
-rw-r--r--target/linux/ath79/patches-5.10/0053-mtd-spi-nor-use-4-bit-BP-for-large-Macronix-flash.patch85
-rw-r--r--target/linux/ath79/patches-5.10/0054-spi-always-write-cs.patch31
-rw-r--r--target/linux/ath79/patches-5.10/0062-MIPS-pci-ar724x-add-QCA9550-reset-sequence.patch130
-rw-r--r--target/linux/ath79/patches-5.10/404-mtd-cybertan-trx-parser.patch27
-rw-r--r--target/linux/ath79/patches-5.10/408-mtd-redboot_partition_scan.patch44
-rw-r--r--target/linux/ath79/patches-5.10/410-spi-ath79-Implement-the-spi_mem-interface.patch68
-rw-r--r--target/linux/ath79/patches-5.10/420-net-use-downstream-ag71xx.patch28
-rw-r--r--target/linux/ath79/patches-5.10/425-at803x-allow-sgmii-aneg-override.patch16
-rw-r--r--target/linux/ath79/patches-5.10/430-drivers-link-spi-before-mtd.patch12
-rw-r--r--target/linux/ath79/patches-5.10/440-mtd-ar934x-nand-driver.patch25
-rw-r--r--target/linux/ath79/patches-5.10/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch98
-rw-r--r--target/linux/ath79/patches-5.10/900-mdio_bitbang_ignore_ta_value.patch32
-rw-r--r--target/linux/ath79/patches-5.10/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch61
-rw-r--r--target/linux/ath79/patches-5.10/910-unaligned_access_hacks.patch869
-rw-r--r--target/linux/ath79/patches-5.10/921-serial-core-add-support-for-boot-console-with-arbitr.patch54
-rw-r--r--target/linux/ath79/patches-5.10/930-ar8216-make-reg-access-atomic.patch59
-rw-r--r--target/linux/ath79/tiny/target.mk2
42 files changed, 3854 insertions, 1 deletions
diff --git a/target/linux/ath79/Makefile b/target/linux/ath79/Makefile
index 2a9857bfb1..288f0f5cd5 100644
--- a/target/linux/ath79/Makefile
+++ b/target/linux/ath79/Makefile
@@ -9,7 +9,6 @@ SUBTARGETS:=generic mikrotik nand tiny
FEATURES:=ramdisk squashfs usbgadget
KERNEL_PATCHVER:=5.4
-KERNEL_TESTING_PATCHVER:=5.4
include $(INCLUDE_DIR)/target.mk
diff --git a/target/linux/ath79/config-5.10 b/target/linux/ath79/config-5.10
new file mode 100644
index 0000000000..4ea93d0837
--- /dev/null
+++ b/target/linux/ath79/config-5.10
@@ -0,0 +1,199 @@
+CONFIG_AG71XX=y
+# CONFIG_AG71XX_DEBUG is not set
+CONFIG_AG71XX_DEBUG_FS=y
+CONFIG_AR8216_PHY=y
+CONFIG_AR8216_PHY_LEDS=y
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MMAP_RND_BITS_MAX=15
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ATH79=y
+CONFIG_ATH79_WDT=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_COMMON_CLK=y
+# CONFIG_COMMON_CLK_BOSTON is not set
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_DIEI=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_RIXI=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_MSA=y
+# CONFIG_CRYPTO_CHACHA_MIPS is not set
+CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
+# CONFIG_CRYPTO_POLY1305_MIPS is not set
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_FIXED_PHY=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_GETTIMEOFDAY=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_LIB_ASHLDI3=y
+CONFIG_GENERIC_LIB_ASHRDI3=y
+CONFIG_GENERIC_LIB_CMPDI2=y
+CONFIG_GENERIC_LIB_LSHRDI3=y
+CONFIG_GENERIC_LIB_UCMPDI2=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_PINCTRL_GROUPS=y
+CONFIG_GENERIC_PINMUX_FUNCTIONS=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_74X164=y
+CONFIG_GPIO_ATH79=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HZ=250
+CONFIG_HZ_250=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_MIPS_CPU=y
+CONFIG_IRQ_WORK=y
+# CONFIG_KERNEL_ZSTD is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_RESET is not set
+CONFIG_LIBFDT=y
+CONFIG_LLD_VERSION=0
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MDIO_GPIO=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MIGRATION=y
+CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
+CONFIG_MIPS_CBPF_JIT=y
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
+CONFIG_MIPS_CMDLINE_FROM_DTB=y
+# CONFIG_MIPS_ELF_APPENDED_DTB is not set
+# CONFIG_MIPS_GENERIC_KERNEL is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_LD_CAN_LINK_VDSO=y
+# CONFIG_MIPS_NO_APPENDED_DTB is not set
+CONFIG_MIPS_RAW_APPENDED_DTB=y
+CONFIG_MIPS_SPRAM=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_PARSER_CYBERTAN=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPLIT_ELF_FW=y
+CONFIG_MTD_SPLIT_LZMA_FW=y
+CONFIG_MTD_SPLIT_SEAMA_FW=y
+CONFIG_MTD_SPLIT_TPLINK_FW=y
+CONFIG_MTD_SPLIT_UIMAGE_FW=y
+CONFIG_MTD_SPLIT_WRGG_FW=y
+CONFIG_MTD_VIRT_CONCAT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_NVMEM=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_PCI=y
+CONFIG_PCI_AR71XX=y
+CONFIG_PCI_AR724X=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DRIVERS_LEGACY=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+# CONFIG_PHY_AR7100_USB is not set
+# CONFIG_PHY_AR7200_USB is not set
+# CONFIG_PHY_ATH79_USB is not set
+CONFIG_PINCTRL=y
+CONFIG_RATIONAL=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_RESET_ATH79=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_AR933X=y
+CONFIG_SERIAL_AR933X_CONSOLE=y
+CONFIG_SERIAL_AR933X_NR_UARTS=2
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_AR934X=y
+CONFIG_SPI_ATH79=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+# CONFIG_SPI_RB4XX is not set
+CONFIG_SRCU=y
+CONFIG_SWCONFIG=y
+CONFIG_SWCONFIG_LEDS=y
+CONFIG_SWPHY=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_MIPS16=y
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM=y
+CONFIG_TARGET_ISA_REV=2
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TINY_SRCU=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
diff --git a/target/linux/ath79/generic/target.mk b/target/linux/ath79/generic/target.mk
index 4e53c89260..2ecaab3f36 100644
--- a/target/linux/ath79/generic/target.mk
+++ b/target/linux/ath79/generic/target.mk
@@ -2,6 +2,8 @@ BOARDNAME:=Generic
DEFAULT_PACKAGES += wpad-basic-wolfssl
+KERNEL_TESTING_PATCHVER:=5.10
+
define Target/Description
Build firmware images for generic Atheros AR71xx/AR913x/AR934x based boards.
endef
diff --git a/target/linux/ath79/nand/target.mk b/target/linux/ath79/nand/target.mk
index 7ea9b57f45..ed3c381093 100644
--- a/target/linux/ath79/nand/target.mk
+++ b/target/linux/ath79/nand/target.mk
@@ -4,6 +4,8 @@ FEATURES += nand
DEFAULT_PACKAGES += wpad-basic-wolfssl
+KERNEL_TESTING_PATCHVER:=5.10
+
define Target/Description
Firmware for boards using Qualcomm Atheros, MIPS-based SoCs
in the ar72xx and subsequent series, with support for NAND flash
diff --git a/target/linux/ath79/patches-5.10/0003-leds-add-reset-controller-based-driver.patch b/target/linux/ath79/patches-5.10/0003-leds-add-reset-controller-based-driver.patch
new file mode 100644
index 0000000000..a023d4c644
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0003-leds-add-reset-controller-based-driver.patch
@@ -0,0 +1,186 @@
+From ecbd9c87f073f097d9fe56390353e64e963e866a Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Tue, 6 Mar 2018 10:03:03 +0100
+Subject: [PATCH 03/27] leds: add reset-controller based driver
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ drivers/leds/Kconfig | 11 ++++
+ drivers/leds/Makefile | 1 +
+ drivers/leds/leds-reset.c | 137 ++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 149 insertions(+)
+ create mode 100644 drivers/leds/leds-reset.c
+
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -928,6 +928,17 @@ config LEDS_ACER_A500
+ This option enables support for the Power Button LED of
+ Acer Iconia Tab A500.
+
++config LEDS_RESET
++ tristate "LED support for reset-controller API"
++ depends on LEDS_CLASS
++ depends on RESET_CONTROLLER
++ help
++ This option enables support for LEDs connected to pins driven by reset
++ controllers. Yes, DNI actual built HW like that.
++
++ To compile this driver as a module, choose M here: the module
++ will be called leds-reset.
++
+ comment "LED Triggers"
+ source "drivers/leds/trigger/Kconfig"
+
+--- /dev/null
++++ b/drivers/leds/leds-reset.c
+@@ -0,0 +1,140 @@
++/*
++ * Copyright (C) 2018 John Crispin <john@phrozen.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++#include <linux/err.h>
++#include <linux/reset.h>
++#include <linux/kernel.h>
++#include <linux/leds.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/platform_device.h>
++#include <linux/reset.h>
++
++struct reset_led_data {
++ struct led_classdev cdev;
++ struct reset_control *rst;
++};
++
++static inline struct reset_led_data *
++ cdev_to_reset_led_data(struct led_classdev *led_cdev)
++{
++ return container_of(led_cdev, struct reset_led_data, cdev);
++}
++
++static void reset_led_set(struct led_classdev *led_cdev,
++ enum led_brightness value)
++{
++ struct reset_led_data *led_dat = cdev_to_reset_led_data(led_cdev);
++
++ if (value == LED_OFF)
++ reset_control_assert(led_dat->rst);
++ else
++ reset_control_deassert(led_dat->rst);
++}
++
++struct reset_leds_priv {
++ int num_leds;
++ struct reset_led_data leds[];
++};
++
++static inline int sizeof_reset_leds_priv(int num_leds)
++{
++ return sizeof(struct reset_leds_priv) +
++ (sizeof(struct reset_led_data) * num_leds);
++}
++
++static struct reset_leds_priv *reset_leds_create(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct fwnode_handle *child;
++ struct reset_leds_priv *priv;
++ int count, ret;
++
++ count = device_get_child_node_count(dev);
++ if (!count)
++ return ERR_PTR(-ENODEV);
++
++ priv = devm_kzalloc(dev, sizeof_reset_leds_priv(count), GFP_KERNEL);
++ if (!priv)
++ return ERR_PTR(-ENOMEM);
++
++ device_for_each_child_node(dev, child) {
++ struct reset_led_data *led = &priv->leds[priv->num_leds];
++ struct device_node *np = to_of_node(child);
++
++ ret = fwnode_property_read_string(child, "label", &led->cdev.name);
++ if (!led->cdev.name) {
++ fwnode_handle_put(child);
++ return ERR_PTR(-EINVAL);
++ }
++ led->rst = __of_reset_control_get(np, NULL, 0, 0, 0, true);
++ if (IS_ERR(led->rst))
++ return ERR_PTR(-EINVAL);
++
++ fwnode_property_read_string(child, "linux,default-trigger",
++ &led->cdev.default_trigger);
++
++ led->cdev.brightness_set = reset_led_set;
++ ret = devm_led_classdev_register(&pdev->dev, &led->cdev);
++ if (ret < 0)
++ return ERR_PTR(ret);
++ led->cdev.dev->of_node = np;
++ priv->num_leds++;
++ }
++
++ return priv;
++}
++
++static const struct of_device_id of_reset_leds_match[] = {
++ { .compatible = "reset-leds", },
++ {},
++};
++
++MODULE_DEVICE_TABLE(of, of_reset_leds_match);
++
++static int reset_led_probe(struct platform_device *pdev)
++{
++ struct reset_leds_priv *priv;
++
++ priv = reset_leds_create(pdev);
++ if (IS_ERR(priv))
++ return PTR_ERR(priv);
++
++ platform_set_drvdata(pdev, priv);
++
++ return 0;
++}
++
++static void reset_led_shutdown(struct platform_device *pdev)
++{
++ struct reset_leds_priv *priv = platform_get_drvdata(pdev);
++ int i;
++
++ for (i = 0; i < priv->num_leds; i++) {
++ struct reset_led_data *led = &priv->leds[i];
++
++ if (!(led->cdev.flags & LED_RETAIN_AT_SHUTDOWN))
++ reset_led_set(&led->cdev, LED_OFF);
++ }
++}
++
++static struct platform_driver reset_led_driver = {
++ .probe = reset_led_probe,
++ .shutdown = reset_led_shutdown,
++ .driver = {
++ .name = "leds-reset",
++ .of_match_table = of_reset_leds_match,
++ },
++};
++
++module_platform_driver(reset_led_driver);
++
++MODULE_AUTHOR("John Crispin <john@phrozen.org>");
++MODULE_DESCRIPTION("reset controller LED driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:leds-reset");
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -93,6 +93,7 @@ obj-$(CONFIG_LEDS_TURRIS_OMNIA) += leds
+ obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
+ obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
+ obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
++obj-$(CONFIG_LEDS_RESET) += leds-reset.o
+
+ # LED SPI Drivers
+ obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o
diff --git a/target/linux/ath79/patches-5.10/0004-phy-add-ath79-usb-phys.patch b/target/linux/ath79/patches-5.10/0004-phy-add-ath79-usb-phys.patch
new file mode 100644
index 0000000000..e319f738a5
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0004-phy-add-ath79-usb-phys.patch
@@ -0,0 +1,333 @@
+From 08c9d6ceef01893678a5d2e8a15517c745417f21 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Tue, 6 Mar 2018 10:04:05 +0100
+Subject: [PATCH 04/27] phy: add ath79 usb phys
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ drivers/phy/Kconfig | 16 ++++++
+ drivers/phy/Makefile | 2 +
+ drivers/phy/phy-ar7100-usb.c | 124 +++++++++++++++++++++++++++++++++++++++++++
+ drivers/phy/phy-ar7200-usb.c | 108 +++++++++++++++++++++++++++++++++++++
+ 4 files changed, 250 insertions(+)
+ create mode 100644 drivers/phy/phy-ar7100-usb.c
+ create mode 100644 drivers/phy/phy-ar7200-usb.c
+
+--- a/drivers/phy/Kconfig
++++ b/drivers/phy/Kconfig
+@@ -24,6 +24,22 @@ config GENERIC_PHY_MIPI_DPHY
+ Provides a number of helpers a core functions for MIPI D-PHY
+ drivers to us.
+
++config PHY_AR7100_USB
++ tristate "Atheros AR7100 USB PHY driver"
++ depends on ATH79 || COMPILE_TEST
++ default y if USB_EHCI_HCD_PLATFORM
++ select PHY_SIMPLE
++ help
++ Enable this to support the USB PHY on Atheros AR7100 SoCs.
++
++config PHY_AR7200_USB
++ tristate "Atheros AR7200 USB PHY driver"
++ depends on ATH79 || COMPILE_TEST
++ default y if USB_EHCI_HCD_PLATFORM
++ select PHY_SIMPLE
++ help
++ Enable this to support the USB PHY on Atheros AR7200 SoCs.
++
+ config PHY_LPC18XX_USB_OTG
+ tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
+ depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
+--- a/drivers/phy/Makefile
++++ b/drivers/phy/Makefile
+@@ -4,6 +4,8 @@
+ #
+
+ obj-$(CONFIG_GENERIC_PHY) += phy-core.o
++obj-$(CONFIG_PHY_AR7100_USB) += phy-ar7100-usb.o
++obj-$(CONFIG_PHY_AR7200_USB) += phy-ar7200-usb.o
+ obj-$(CONFIG_GENERIC_PHY_MIPI_DPHY) += phy-core-mipi-dphy.o
+ obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
+ obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
+--- /dev/null
++++ b/drivers/phy/phy-ar7100-usb.c
+@@ -0,0 +1,140 @@
++/*
++ * Copyright (C) 2018 John Crispin <john@phrozen.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/phy/phy.h>
++#include <linux/delay.h>
++#include <linux/reset.h>
++#include <linux/of_gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++struct ar7100_usb_phy {
++ struct reset_control *rst_phy;
++ struct reset_control *rst_host;
++ struct reset_control *rst_ohci_dll;
++ void __iomem *io_base;
++ struct phy *phy;
++ int gpio;
++};
++
++static int ar7100_usb_phy_power_off(struct phy *phy)
++{
++ struct ar7100_usb_phy *priv = phy_get_drvdata(phy);
++ int err = 0;
++
++ err |= reset_control_assert(priv->rst_host);
++ err |= reset_control_assert(priv->rst_phy);
++ err |= reset_control_assert(priv->rst_ohci_dll);
++
++ return err;
++}
++
++static int ar7100_usb_phy_power_on(struct phy *phy)
++{
++ struct ar7100_usb_phy *priv = phy_get_drvdata(phy);
++ int err = 0;
++
++ err |= ar7100_usb_phy_power_off(phy);
++ mdelay(100);
++ err |= reset_control_deassert(priv->rst_ohci_dll);
++ err |= reset_control_deassert(priv->rst_phy);
++ err |= reset_control_deassert(priv->rst_host);
++ mdelay(500);
++ iowrite32(0xf0000, priv->io_base + AR71XX_USB_CTRL_REG_CONFIG);
++ iowrite32(0x20c00, priv->io_base + AR71XX_USB_CTRL_REG_FLADJ);
++
++ return err;
++}
++
++static const struct phy_ops ar7100_usb_phy_ops = {
++ .power_on = ar7100_usb_phy_power_on,
++ .power_off = ar7100_usb_phy_power_off,
++ .owner = THIS_MODULE,
++};
++
++static int ar7100_usb_phy_probe(struct platform_device *pdev)
++{
++ struct phy_provider *phy_provider;
++ struct resource *res;
++ struct ar7100_usb_phy *priv;
++
++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
++ if (!priv)
++ return -ENOMEM;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ priv->io_base = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(priv->io_base))
++ return PTR_ERR(priv->io_base);
++
++ priv->rst_phy = devm_reset_control_get(&pdev->dev, "usb-phy");
++ if (IS_ERR(priv->rst_phy)) {
++ dev_err(&pdev->dev, "phy reset is missing\n");
++ return PTR_ERR(priv->rst_phy);
++ }
++
++ priv->rst_host = devm_reset_control_get(&pdev->dev, "usb-host");
++ if (IS_ERR(priv->rst_host)) {
++ dev_err(&pdev->dev, "host reset is missing\n");
++ return PTR_ERR(priv->rst_host);
++ }
++
++ priv->rst_ohci_dll = devm_reset_control_get(&pdev->dev, "usb-ohci-dll");
++ if (IS_ERR(priv->rst_ohci_dll)) {
++ dev_err(&pdev->dev, "ohci-dll reset is missing\n");
++ return PTR_ERR(priv->rst_host);
++ }
++
++ priv->phy = devm_phy_create(&pdev->dev, NULL, &ar7100_usb_phy_ops);
++ if (IS_ERR(priv->phy)) {
++ dev_err(&pdev->dev, "failed to create PHY\n");
++ return PTR_ERR(priv->phy);
++ }
++
++ priv->gpio = of_get_gpio(pdev->dev.of_node, 0);
++ if (priv->gpio >= 0) {
++ int ret = devm_gpio_request(&pdev->dev, priv->gpio, dev_name(&pdev->dev));
++
++ if (ret) {
++ dev_err(&pdev->dev, "failed to request gpio\n");
++ return ret;
++ }
++ gpio_export_with_name(priv->gpio, 0, dev_name(&pdev->dev));
++ gpio_set_value(priv->gpio, 1);
++ }
++
++ phy_set_drvdata(priv->phy, priv);
++
++ phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
++
++
++ return PTR_ERR_OR_ZERO(phy_provider);
++}
++
++static const struct of_device_id ar7100_usb_phy_of_match[] = {
++ { .compatible = "qca,ar7100-usb-phy" },
++ {}
++};
++MODULE_DEVICE_TABLE(of, ar7100_usb_phy_of_match);
++
++static struct platform_driver ar7100_usb_phy_driver = {
++ .probe = ar7100_usb_phy_probe,
++ .driver = {
++ .of_match_table = ar7100_usb_phy_of_match,
++ .name = "ar7100-usb-phy",
++ }
++};
++module_platform_driver(ar7100_usb_phy_driver);
++
++MODULE_DESCRIPTION("ATH79 USB PHY driver");
++MODULE_AUTHOR("Alban Bedel <albeu@free.fr>");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/drivers/phy/phy-ar7200-usb.c
+@@ -0,0 +1,136 @@
++/*
++ * Copyright (C) 2015 Alban Bedel <albeu@free.fr>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/phy/phy.h>
++#include <linux/reset.h>
++#include <linux/of_gpio.h>
++
++struct ar7200_usb_phy {
++ struct reset_control *rst_phy;
++ struct reset_control *rst_phy_analog;
++ struct reset_control *suspend_override;
++ struct phy *phy;
++ int gpio;
++};
++
++static int ar7200_usb_phy_power_on(struct phy *phy)
++{
++ struct ar7200_usb_phy *priv = phy_get_drvdata(phy);
++ int err = 0;
++
++ if (priv->suspend_override)
++ err = reset_control_assert(priv->suspend_override);
++ if (priv->rst_phy)
++ err |= reset_control_deassert(priv->rst_phy);
++ if (priv->rst_phy_analog)
++ err |= reset_control_deassert(priv->rst_phy_analog);
++
++ return err;
++}
++
++static int ar7200_usb_phy_power_off(struct phy *phy)
++{
++ struct ar7200_usb_phy *priv = phy_get_drvdata(phy);
++ int err = 0;
++
++ if (priv->suspend_override)
++ err = reset_control_deassert(priv->suspend_override);
++ if (priv->rst_phy)
++ err |= reset_control_assert(priv->rst_phy);
++ if (priv->rst_phy_analog)
++ err |= reset_control_assert(priv->rst_phy_analog);
++
++ return err;
++}
++
++static const struct phy_ops ar7200_usb_phy_ops = {
++ .power_on = ar7200_usb_phy_power_on,
++ .power_off = ar7200_usb_phy_power_off,
++ .owner = THIS_MODULE,
++};
++
++static int ar7200_usb_phy_probe(struct platform_device *pdev)
++{
++ struct phy_provider *phy_provider;
++ struct ar7200_usb_phy *priv;
++
++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
++ if (!priv)
++ return -ENOMEM;
++
++ priv->rst_phy = devm_reset_control_get(&pdev->dev, "usb-phy");
++ if (IS_ERR(priv->rst_phy)) {
++ if (PTR_ERR(priv->rst_phy) != -EPROBE_DEFER)
++ dev_err(&pdev->dev, "phy reset is missing\n");
++ return PTR_ERR(priv->rst_phy);
++ }
++
++ priv->rst_phy_analog = devm_reset_control_get_optional(
++ &pdev->dev, "usb-phy-analog");
++ if (IS_ERR(priv->rst_phy_analog)) {
++ if (PTR_ERR(priv->rst_phy_analog) == -ENOENT)
++ priv->rst_phy_analog = NULL;
++ else
++ return PTR_ERR(priv->rst_phy_analog);
++ }
++
++ priv->suspend_override = devm_reset_control_get_optional(
++ &pdev->dev, "usb-suspend-override");
++ if (IS_ERR(priv->suspend_override)) {
++ if (PTR_ERR(priv->suspend_override) == -ENOENT)
++ priv->suspend_override = NULL;
++ else
++ return PTR_ERR(priv->suspend_override);
++ }
++
++ priv->phy = devm_phy_create(&pdev->dev, NULL, &ar7200_usb_phy_ops);
++ if (IS_ERR(priv->phy)) {
++ dev_err(&pdev->dev, "failed to create PHY\n");
++ return PTR_ERR(priv->phy);
++ }
++
++ priv->gpio = of_get_gpio(pdev->dev.of_node, 0);
++ if (priv->gpio >= 0) {
++ int ret = devm_gpio_request(&pdev->dev, priv->gpio, dev_name(&pdev->dev));
++
++ if (ret) {
++ dev_err(&pdev->dev, "failed to request gpio\n");
++ return ret;
++ }
++ gpio_export_with_name(priv->gpio, 0, dev_name(&pdev->dev));
++ gpio_set_value(priv->gpio, 1);
++ }
++
++ phy_set_drvdata(priv->phy, priv);
++
++ phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
++
++ return PTR_ERR_OR_ZERO(phy_provider);
++}
++
++static const struct of_device_id ar7200_usb_phy_of_match[] = {
++ { .compatible = "qca,ar7200-usb-phy" },
++ {}
++};
++MODULE_DEVICE_TABLE(of, ar7200_usb_phy_of_match);
++
++static struct platform_driver ar7200_usb_phy_driver = {
++ .probe = ar7200_usb_phy_probe,
++ .driver = {
++ .of_match_table = ar7200_usb_phy_of_match,
++ .name = "ar7200-usb-phy",
++ }
++};
++module_platform_driver(ar7200_usb_phy_driver);
++
++MODULE_DESCRIPTION("ATH79 USB PHY driver");
++MODULE_AUTHOR("Alban Bedel <albeu@free.fr>");
++MODULE_LICENSE("GPL");
diff --git a/target/linux/ath79/patches-5.10/0005-usb-add-more-OF-quirk-properties.patch b/target/linux/ath79/patches-5.10/0005-usb-add-more-OF-quirk-properties.patch
new file mode 100644
index 0000000000..3c8740311d
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0005-usb-add-more-OF-quirk-properties.patch
@@ -0,0 +1,24 @@
+From 2201818e5bd33f389beceb3943fdfcf5a698fc5b Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Tue, 6 Mar 2018 10:01:43 +0100
+Subject: [PATCH 05/27] usb: add more OF/quirk properties
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ drivers/usb/host/ehci-platform.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/drivers/usb/host/ehci-platform.c
++++ b/drivers/usb/host/ehci-platform.c
+@@ -269,6 +269,11 @@ static int ehci_platform_probe(struct pl
+ ehci = hcd_to_ehci(hcd);
+
+ if (pdata == &ehci_platform_defaults && dev->dev.of_node) {
++ of_property_read_u32(dev->dev.of_node, "caps-offset", &pdata->caps_offset);
++
++ if (of_property_read_bool(dev->dev.of_node, "has-synopsys-hc-bug"))
++ pdata->has_synopsys_hc_bug = 1;
++
+ if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
+ ehci->big_endian_mmio = 1;
+
diff --git a/target/linux/ath79/patches-5.10/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch b/target/linux/ath79/patches-5.10/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch
new file mode 100644
index 0000000000..ceda511c21
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch
@@ -0,0 +1,168 @@
+From f3eacff2310a60348a755c50a8da6fc251fc8587 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Tue, 6 Mar 2018 09:55:13 +0100
+Subject: [PATCH 07/33] irqchip/irq-ath79-intc: add irq cascade driver for
+ QCA9556 SoCs
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ drivers/irqchip/Makefile | 1 +
+ drivers/irqchip/irq-ath79-intc.c | 142 +++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 143 insertions(+)
+ create mode 100644 drivers/irqchip/irq-ath79-intc.c
+
+--- a/drivers/irqchip/Makefile
++++ b/drivers/irqchip/Makefile
+@@ -4,6 +4,7 @@ obj-$(CONFIG_IRQCHIP) += irqchip.o
+ obj-$(CONFIG_AL_FIC) += irq-al-fic.o
+ obj-$(CONFIG_ALPINE_MSI) += irq-alpine-msi.o
+ obj-$(CONFIG_ATH79) += irq-ath79-cpu.o
++obj-$(CONFIG_ATH79) += irq-ath79-intc.o
+ obj-$(CONFIG_ATH79) += irq-ath79-misc.o
+ obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o
+ obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2836.o
+--- /dev/null
++++ b/drivers/irqchip/irq-ath79-intc.c
+@@ -0,0 +1,142 @@
++/*
++ * Atheros AR71xx/AR724x/AR913x specific interrupt handling
++ *
++ * Copyright (C) 2018 John Crispin <john@phrozen.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/interrupt.h>
++#include <linux/irqchip.h>
++#include <linux/of.h>
++#include <linux/of_irq.h>
++#include <linux/irqdomain.h>
++
++#include <asm/irq_cpu.h>
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#define ATH79_MAX_INTC_CASCADE 3
++
++struct ath79_intc {
++ struct irq_chip chip;
++ u32 irq;
++ u32 pending_mask;
++ u32 int_status;
++ u32 irq_mask[ATH79_MAX_INTC_CASCADE];
++ u32 irq_wb_chan[ATH79_MAX_INTC_CASCADE];
++};
++
++static void ath79_intc_irq_handler(struct irq_desc *desc)
++{
++ struct irq_domain *domain = irq_desc_get_handler_data(desc);
++ struct ath79_intc *intc = domain->host_data;
++ u32 pending;
++
++ pending = ath79_reset_rr(intc->int_status);
++ pending &= intc->pending_mask;
++
++ if (pending) {
++ int i;
++
++ for (i = 0; i < domain->hwirq_max; i++)
++ if (pending & intc->irq_mask[i]) {
++ if (intc->irq_wb_chan[i] != 0xffffffff)
++ ath79_ddr_wb_flush(intc->irq_wb_chan[i]);
++ generic_handle_irq(irq_find_mapping(domain, i));
++ }
++ } else {
++ spurious_interrupt();
++ }
++}
++
++static void ath79_intc_irq_enable(struct irq_data *d)
++{
++ struct ath79_intc *intc = d->domain->host_data;
++ enable_irq(intc->irq);
++}
++
++static void ath79_intc_irq_disable(struct irq_data *d)
++{
++ struct ath79_intc *intc = d->domain->host_data;
++ disable_irq(intc->irq);
++}
++
++static int ath79_intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
++{
++ struct ath79_intc *intc = d->host_data;
++
++ irq_set_chip_and_handler(irq, &intc->chip, handle_level_irq);
++
++ return 0;
++}
++
++static const struct irq_domain_ops ath79_irq_domain_ops = {
++ .xlate = irq_domain_xlate_onecell,
++ .map = ath79_intc_map,
++};
++
++static int __init ath79_intc_of_init(
++ struct device_node *node, struct device_node *parent)
++{
++ struct irq_domain *domain;
++ struct ath79_intc *intc;
++ int cnt, cntwb, i, err;
++
++ cnt = of_property_count_u32_elems(node, "qca,pending-bits");
++ if (cnt > ATH79_MAX_INTC_CASCADE)
++ panic("Too many INTC pending bits\n");
++
++ intc = kzalloc(sizeof(*intc), GFP_KERNEL);
++ if (!intc)
++ panic("Failed to allocate INTC memory\n");
++ intc->chip = dummy_irq_chip;
++ intc->chip.name = "INTC";
++ intc->chip.irq_disable = ath79_intc_irq_disable;
++ intc->chip.irq_enable = ath79_intc_irq_enable;
++
++ if (of_property_read_u32(node, "qca,int-status-addr", &intc->int_status) < 0) {
++ panic("Missing address of interrupt status register\n");
++ }
++
++ of_property_read_u32_array(node, "qca,pending-bits", intc->irq_mask, cnt);
++ for (i = 0; i < cnt; i++) {
++ intc->pending_mask |= intc->irq_mask[i];
++ intc->irq_wb_chan[i] = 0xffffffff;
++ }
++
++ cntwb = of_count_phandle_with_args(
++ node, "qca,ddr-wb-channels", "#qca,ddr-wb-channel-cells");
++
++ for (i = 0; i < cntwb; i++) {
++ struct of_phandle_args args;
++ u32 irq = i;
++
++ of_property_read_u32_index(
++ node, "qca,ddr-wb-channel-interrupts", i, &irq);
++ if (irq >= ATH79_MAX_INTC_CASCADE)
++ continue;
++
++ err = of_parse_phandle_with_args(
++ node, "qca,ddr-wb-channels",
++ "#qca,ddr-wb-channel-cells",
++ i, &args);
++ if (err)
++ return err;
++
++ intc->irq_wb_chan[irq] = args.args[0];
++ }
++
++ intc->irq = irq_of_parse_and_map(node, 0);
++ if (!intc->irq)
++ panic("Failed to get INTC IRQ");
++
++ domain = irq_domain_add_linear(node, cnt, &ath79_irq_domain_ops, intc);
++ irq_set_chained_handler_and_data(intc->irq, ath79_intc_irq_handler, domain);
++
++ return 0;
++}
++IRQCHIP_DECLARE(ath79_intc, "qca,ar9340-intc",
++ ath79_intc_of_init);
diff --git a/target/linux/ath79/patches-5.10/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch b/target/linux/ath79/patches-5.10/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch
new file mode 100644
index 0000000000..13117d9a8e
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch
@@ -0,0 +1,23 @@
+From e029f998594f151008ecbfa024e2957edd2a5189 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Tue, 6 Mar 2018 09:58:19 +0100
+Subject: [PATCH 08/33] irqchip/irq-ath79-cpu: drop !OF init helper
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ drivers/irqchip/irq-ath79-cpu.c | 7 -------
+ 1 file changed, 7 deletions(-)
+
+--- a/drivers/irqchip/irq-ath79-cpu.c
++++ b/drivers/irqchip/irq-ath79-cpu.c
+@@ -85,10 +85,3 @@ static int __init ar79_cpu_intc_of_init(
+ }
+ IRQCHIP_DECLARE(ar79_cpu_intc, "qca,ar7100-cpu-intc",
+ ar79_cpu_intc_of_init);
+-
+-void __init ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3)
+-{
+- irq_wb_chan[2] = irq_wb_chan2;
+- irq_wb_chan[3] = irq_wb_chan3;
+- mips_cpu_irq_init();
+-}
diff --git a/target/linux/ath79/patches-5.10/0017-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch b/target/linux/ath79/patches-5.10/0017-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch
new file mode 100644
index 0000000000..bf7eb691a5
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0017-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch
@@ -0,0 +1,57 @@
+From 4a4f869ec58ed8910b9b2e68d0eee50957e9bb20 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Mon, 25 Jun 2018 15:52:10 +0200
+Subject: [PATCH 17/33] dt-bindings: PCI: qcom,ar7100: adds binding doc
+
+With the driver being converted from platform_data to pure OF, we need to
+also add some docs.
+
+Cc: Rob Herring <robh+dt@kernel.org>
+Cc: devicetree@vger.kernel.org
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ .../devicetree/bindings/pci/qcom,ar7100-pci.txt | 38 ++++++++++++++++++++++
+ 1 file changed, 38 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/pci/qcom,ar7100-pci.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/pci/qcom,ar7100-pci.txt
+@@ -0,0 +1,38 @@
++* Qualcomm Atheros AR7100 PCI express root complex
++
++Required properties:
++- compatible: should contain "qcom,ar7100-pci" to identify the core.
++- reg: Should contain the register ranges as listed in the reg-names property.
++- reg-names: Definition: Must include the following entries
++ - "cfg_base" IO Memory
++- #address-cells: set to <3>
++- #size-cells: set to <2>
++- ranges: ranges for the PCI memory and I/O regions
++- interrupt-map-mask and interrupt-map: standard PCI
++ properties to define the mapping of the PCIe interface to interrupt
++ numbers.
++- #interrupt-cells: set to <1>
++- interrupt-controller: define to enable the builtin IRQ cascade.
++
++Optional properties:
++- interrupt-parent: phandle to the MIPS IRQ controller
++
++* Example for ar7100
++ pcie-controller@180c0000 {
++ compatible = "qca,ar7100-pci";
++ #address-cells = <3>;
++ #size-cells = <2>;
++ bus-range = <0x0 0x0>;
++ reg = <0x17010000 0x100>;
++ reg-names = "cfg_base";
++ ranges = <0x2000000 0 0x10000000 0x10000000 0 0x07000000
++ 0x1000000 0 0x00000000 0x00000000 0 0x00000001>;
++ interrupt-parent = <&cpuintc>;
++ interrupts = <2>;
++
++ interrupt-controller;
++ #interrupt-cells = <1>;
++
++ interrupt-map-mask = <0 0 0 1>;
++ interrupt-map = <0 0 0 0 &pcie0 0>;
++ };
diff --git a/target/linux/ath79/patches-5.10/0018-MIPS-pci-ar71xx-convert-to-OF.patch b/target/linux/ath79/patches-5.10/0018-MIPS-pci-ar71xx-convert-to-OF.patch
new file mode 100644
index 0000000000..e600a4f0d9
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0018-MIPS-pci-ar71xx-convert-to-OF.patch
@@ -0,0 +1,202 @@
+From 1855ab6b1d27f5b38a648baf57ff6a534afec26d Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Sat, 23 Jun 2018 15:07:23 +0200
+Subject: [PATCH 18/33] MIPS: pci-ar71xx: convert to OF
+
+With the ath79 target getting converted to pure OF, we can drop all the
+platform data code and add the missing OF bits to the driver. We also add
+a irq domain for the PCI/e controllers cascade, thus making it usable from
+dts files.
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/mips/pci/pci-ar71xx.c | 82 +++++++++++++++++++++++-----------------------
+ 1 file changed, 41 insertions(+), 41 deletions(-)
+
+--- a/arch/mips/pci/pci-ar71xx.c
++++ b/arch/mips/pci/pci-ar71xx.c
+@@ -15,8 +15,11 @@
+ #include <linux/pci.h>
+ #include <linux/pci_regs.h>
+ #include <linux/interrupt.h>
++#include <linux/irqchip/chained_irq.h>
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
++#include <linux/of_irq.h>
++#include <linux/of_pci.h>
+
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ #include <asm/mach-ath79/ath79.h>
+@@ -46,12 +49,13 @@
+ #define AR71XX_PCI_IRQ_COUNT 5
+
+ struct ar71xx_pci_controller {
++ struct device_node *np;
+ void __iomem *cfg_base;
+ int irq;
+- int irq_base;
+ struct pci_controller pci_ctrl;
+ struct resource io_res;
+ struct resource mem_res;
++ struct irq_domain *domain;
+ };
+
+ /* Byte lane enable bits */
+@@ -225,29 +229,30 @@ static struct pci_ops ar71xx_pci_ops = {
+
+ static void ar71xx_pci_irq_handler(struct irq_desc *desc)
+ {
+- struct ar71xx_pci_controller *apc;
+ void __iomem *base = ath79_reset_base;
++ struct irq_chip *chip = irq_desc_get_chip(desc);
++ struct ar71xx_pci_controller *apc = irq_desc_get_handler_data(desc);
+ u32 pending;
+
+- apc = irq_desc_get_handler_data(desc);
+-
++ chained_irq_enter(chip, desc);
+ pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) &
+ __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+
+ if (pending & AR71XX_PCI_INT_DEV0)
+- generic_handle_irq(apc->irq_base + 0);
++ generic_handle_irq(irq_linear_revmap(apc->domain, 1));
+
+ else if (pending & AR71XX_PCI_INT_DEV1)
+- generic_handle_irq(apc->irq_base + 1);
++ generic_handle_irq(irq_linear_revmap(apc->domain, 2));
+
+ else if (pending & AR71XX_PCI_INT_DEV2)
+- generic_handle_irq(apc->irq_base + 2);
++ generic_handle_irq(irq_linear_revmap(apc->domain, 3));
+
+ else if (pending & AR71XX_PCI_INT_CORE)
+- generic_handle_irq(apc->irq_base + 4);
++ generic_handle_irq(irq_linear_revmap(apc->domain, 4));
+
+ else
+ spurious_interrupt();
++ chained_irq_exit(chip, desc);
+ }
+
+ static void ar71xx_pci_irq_unmask(struct irq_data *d)
+@@ -258,7 +263,7 @@ static void ar71xx_pci_irq_unmask(struct
+ u32 t;
+
+ apc = irq_data_get_irq_chip_data(d);
+- irq = d->irq - apc->irq_base;
++ irq = irq_linear_revmap(apc->domain, d->irq);
+
+ t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+ __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+@@ -275,7 +280,7 @@ static void ar71xx_pci_irq_mask(struct i
+ u32 t;
+
+ apc = irq_data_get_irq_chip_data(d);
+- irq = d->irq - apc->irq_base;
++ irq = irq_linear_revmap(apc->domain, d->irq);
+
+ t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+ __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+@@ -291,24 +296,31 @@ static struct irq_chip ar71xx_pci_irq_ch
+ .irq_mask_ack = ar71xx_pci_irq_mask,
+ };
+
++static int ar71xx_pci_irq_map(struct irq_domain *d,
++ unsigned int irq, irq_hw_number_t hw)
++{
++ struct ar71xx_pci_controller *apc = d->host_data;
++
++ irq_set_chip_and_handler(irq, &ar71xx_pci_irq_chip, handle_level_irq);
++ irq_set_chip_data(irq, apc);
++
++ return 0;
++}
++
++static const struct irq_domain_ops ar71xx_pci_domain_ops = {
++ .xlate = irq_domain_xlate_onecell,
++ .map = ar71xx_pci_irq_map,
++};
++
+ static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc)
+ {
+ void __iomem *base = ath79_reset_base;
+- int i;
+
+ __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+ __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS);
+
+- BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR71XX_PCI_IRQ_COUNT);
+-
+- apc->irq_base = ATH79_PCI_IRQ_BASE;
+- for (i = apc->irq_base;
+- i < apc->irq_base + AR71XX_PCI_IRQ_COUNT; i++) {
+- irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip,
+- handle_level_irq);
+- irq_set_chip_data(i, apc);
+- }
+-
++ apc->domain = irq_domain_add_linear(apc->np, AR71XX_PCI_IRQ_COUNT,
++ &ar71xx_pci_domain_ops, apc);
+ irq_set_chained_handler_and_data(apc->irq, ar71xx_pci_irq_handler,
+ apc);
+ }
+@@ -325,6 +337,11 @@ static void ar71xx_pci_reset(void)
+ mdelay(100);
+ }
+
++static const struct of_device_id ar71xx_pci_ids[] = {
++ { .compatible = "qca,ar7100-pci" },
++ {},
++};
++
+ static int ar71xx_pci_probe(struct platform_device *pdev)
+ {
+ struct ar71xx_pci_controller *apc;
+@@ -345,26 +362,6 @@ static int ar71xx_pci_probe(struct platf
+ if (apc->irq < 0)
+ return -EINVAL;
+
+- res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base");
+- if (!res)
+- return -EINVAL;
+-
+- apc->io_res.parent = res;
+- apc->io_res.name = "PCI IO space";
+- apc->io_res.start = res->start;
+- apc->io_res.end = res->end;
+- apc->io_res.flags = IORESOURCE_IO;
+-
+- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base");
+- if (!res)
+- return -EINVAL;
+-
+- apc->mem_res.parent = res;
+- apc->mem_res.name = "PCI memory space";
+- apc->mem_res.start = res->start;
+- apc->mem_res.end = res->end;
+- apc->mem_res.flags = IORESOURCE_MEM;
+-
+ ar71xx_pci_reset();
+
+ /* setup COMMAND register */
+@@ -377,9 +374,11 @@ static int ar71xx_pci_probe(struct platf
+
+ ar71xx_pci_irq_init(apc);
+
++ apc->np = pdev->dev.of_node;
+ apc->pci_ctrl.pci_ops = &ar71xx_pci_ops;
+ apc->pci_ctrl.mem_resource = &apc->mem_res;
+ apc->pci_ctrl.io_resource = &apc->io_res;
++ pci_load_of_ranges(&apc->pci_ctrl, pdev->dev.of_node);
+
+ register_pci_controller(&apc->pci_ctrl);
+
+@@ -390,6 +389,7 @@ static struct platform_driver ar71xx_pci
+ .probe = ar71xx_pci_probe,
+ .driver = {
+ .name = "ar71xx-pci",
++ .of_match_table = of_match_ptr(ar71xx_pci_ids),
+ },
+ };
+
diff --git a/target/linux/ath79/patches-5.10/0019-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch b/target/linux/ath79/patches-5.10/0019-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch
new file mode 100644
index 0000000000..a0af79cb4d
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0019-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch
@@ -0,0 +1,61 @@
+From ea27764bc3ef2a05decf3ae05edffc289cd0d93c Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Mon, 25 Jun 2018 15:52:02 +0200
+Subject: [PATCH 19/33] dt-bindings: PCI: qcom,ar7240: adds binding doc
+
+With the driver being converted from platform_data to pure OF, we need to
+also add some docs.
+
+Cc: Rob Herring <robh+dt@kernel.org>
+Cc: devicetree@vger.kernel.org
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ .../devicetree/bindings/pci/qcom,ar7240-pci.txt | 42 ++++++++++++++++++++++
+ 1 file changed, 42 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt
+@@ -0,0 +1,42 @@
++* Qualcomm Atheros AR724X PCI express root complex
++
++Required properties:
++- compatible: should contain "qcom,ar7240-pci" to identify the core.
++- reg: Should contain the register ranges as listed in the reg-names property.
++- reg-names: Definition: Must include the following entries
++ - "crp_base" Configuration registers
++ - "ctrl_base" Control registers
++ - "cfg_base" IO Memory
++- #address-cells: set to <3>
++- #size-cells: set to <2>
++- ranges: ranges for the PCI memory and I/O regions
++- interrupt-map-mask and interrupt-map: standard PCI
++ properties to define the mapping of the PCIe interface to interrupt
++ numbers.
++- #interrupt-cells: set to <1>
++- interrupt-parent: phandle to the MIPS IRQ controller
++
++Optional properties:
++- interrupt-controller: define to enable the builtin IRQ cascade.
++
++* Example for qca9557
++ pcie-controller@180c0000 {
++ compatible = "qcom,ar7240-pci";
++ #address-cells = <3>;
++ #size-cells = <2>;
++ bus-range = <0x0 0x0>;
++ reg = <0x180c0000 0x1000>,
++ <0x180f0000 0x100>,
++ <0x14000000 0x1000>;
++ reg-names = "crp_base", "ctrl_base", "cfg_base";
++ ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000
++ 0x1000000 0 0x00000000 0x00000000 0 0x00000001>;
++ interrupt-parent = <&intc2>;
++ interrupts = <1>;
++
++ interrupt-controller;
++ #interrupt-cells = <1>;
++
++ interrupt-map-mask = <0 0 0 1>;
++ interrupt-map = <0 0 0 0 &pcie0 0>;
++ };
diff --git a/target/linux/ath79/patches-5.10/0020-MIPS-pci-ar724x-convert-to-OF.patch b/target/linux/ath79/patches-5.10/0020-MIPS-pci-ar724x-convert-to-OF.patch
new file mode 100644
index 0000000000..b8a877c63d
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0020-MIPS-pci-ar724x-convert-to-OF.patch
@@ -0,0 +1,205 @@
+From a522ee0199d5d3ea114ca2e211f6ac398d3e8e0b Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Sat, 23 Jun 2018 15:07:37 +0200
+Subject: [PATCH 20/33] MIPS: pci-ar724x: convert to OF
+
+With the ath79 target getting converted to pure OF, we can drop all the
+platform data code and add the missing OF bits to the driver. We also add
+a irq domain for the PCI/e controllers cascade, thus making it usable from
+dts files.
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/mips/pci/pci-ar724x.c | 88 ++++++++++++++++++++++------------------------
+ 1 file changed, 42 insertions(+), 46 deletions(-)
+
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -11,8 +11,11 @@
+ #include <linux/init.h>
+ #include <linux/delay.h>
+ #include <linux/platform_device.h>
++#include <linux/irqchip/chained_irq.h>
+ #include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/ar71xx_regs.h>
++#include <linux/of_irq.h>
++#include <linux/of_pci.h>
+
+ #define AR724X_PCI_REG_APP 0x00
+ #define AR724X_PCI_REG_RESET 0x18
+@@ -42,17 +45,20 @@ struct ar724x_pci_controller {
+ void __iomem *crp_base;
+
+ int irq;
+- int irq_base;
+
+ bool link_up;
+ bool bar0_is_cached;
+ u32 bar0_value;
+
++ struct device_node *np;
+ struct pci_controller pci_controller;
++ struct irq_domain *domain;
+ struct resource io_res;
+ struct resource mem_res;
+ };
+
++static struct irq_chip ar724x_pci_irq_chip;
++
+ static inline bool ar724x_pci_check_link(struct ar724x_pci_controller *apc)
+ {
+ u32 reset;
+@@ -228,35 +234,31 @@ static struct pci_ops ar724x_pci_ops = {
+
+ static void ar724x_pci_irq_handler(struct irq_desc *desc)
+ {
+- struct ar724x_pci_controller *apc;
+- void __iomem *base;
++ struct irq_chip *chip = irq_desc_get_chip(desc);
++ struct ar724x_pci_controller *apc = irq_desc_get_handler_data(desc);
+ u32 pending;
+
+- apc = irq_desc_get_handler_data(desc);
+- base = apc->ctrl_base;
+-
+- pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) &
+- __raw_readl(base + AR724X_PCI_REG_INT_MASK);
++ chained_irq_enter(chip, desc);
++ pending = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_INT_STATUS) &
++ __raw_readl(apc->ctrl_base + AR724X_PCI_REG_INT_MASK);
+
+ if (pending & AR724X_PCI_INT_DEV0)
+- generic_handle_irq(apc->irq_base + 0);
+-
++ generic_handle_irq(irq_linear_revmap(apc->domain, 1));
+ else
+ spurious_interrupt();
++ chained_irq_exit(chip, desc);
+ }
+
+ static void ar724x_pci_irq_unmask(struct irq_data *d)
+ {
+ struct ar724x_pci_controller *apc;
+ void __iomem *base;
+- int offset;
+ u32 t;
+
+ apc = irq_data_get_irq_chip_data(d);
+ base = apc->ctrl_base;
+- offset = apc->irq_base - d->irq;
+
+- switch (offset) {
++ switch (irq_linear_revmap(apc->domain, d->irq)) {
+ case 0:
+ t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
+ __raw_writel(t | AR724X_PCI_INT_DEV0,
+@@ -270,14 +272,12 @@ static void ar724x_pci_irq_mask(struct i
+ {
+ struct ar724x_pci_controller *apc;
+ void __iomem *base;
+- int offset;
+ u32 t;
+
+ apc = irq_data_get_irq_chip_data(d);
+ base = apc->ctrl_base;
+- offset = apc->irq_base - d->irq;
+
+- switch (offset) {
++ switch (irq_linear_revmap(apc->domain, d->irq)) {
+ case 0:
+ t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
+ __raw_writel(t & ~AR724X_PCI_INT_DEV0,
+@@ -302,26 +302,34 @@ static struct irq_chip ar724x_pci_irq_ch
+ .irq_mask_ack = ar724x_pci_irq_mask,
+ };
+
++static int ar724x_pci_irq_map(struct irq_domain *d,
++ unsigned int irq, irq_hw_number_t hw)
++{
++ struct ar724x_pci_controller *apc = d->host_data;
++
++ irq_set_chip_and_handler(irq, &ar724x_pci_irq_chip, handle_level_irq);
++ irq_set_chip_data(irq, apc);
++
++ return 0;
++}
++
++static const struct irq_domain_ops ar724x_pci_domain_ops = {
++ .xlate = irq_domain_xlate_onecell,
++ .map = ar724x_pci_irq_map,
++};
++
+ static void ar724x_pci_irq_init(struct ar724x_pci_controller *apc,
+ int id)
+ {
+ void __iomem *base;
+- int i;
+
+ base = apc->ctrl_base;
+
+ __raw_writel(0, base + AR724X_PCI_REG_INT_MASK);
+ __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS);
+
+- apc->irq_base = ATH79_PCI_IRQ_BASE + (id * AR724X_PCI_IRQ_COUNT);
+-
+- for (i = apc->irq_base;
+- i < apc->irq_base + AR724X_PCI_IRQ_COUNT; i++) {
+- irq_set_chip_and_handler(i, &ar724x_pci_irq_chip,
+- handle_level_irq);
+- irq_set_chip_data(i, apc);
+- }
+-
++ apc->domain = irq_domain_add_linear(apc->np, 2,
++ &ar724x_pci_domain_ops, apc);
+ irq_set_chained_handler_and_data(apc->irq, ar724x_pci_irq_handler,
+ apc);
+ }
+@@ -391,29 +399,11 @@ static int ar724x_pci_probe(struct platf
+ if (apc->irq < 0)
+ return -EINVAL;
+
+- res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base");
+- if (!res)
+- return -EINVAL;
+-
+- apc->io_res.parent = res;
+- apc->io_res.name = "PCI IO space";
+- apc->io_res.start = res->start;
+- apc->io_res.end = res->end;
+- apc->io_res.flags = IORESOURCE_IO;
+-
+- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base");
+- if (!res)
+- return -EINVAL;
+-
+- apc->mem_res.parent = res;
+- apc->mem_res.name = "PCI memory space";
+- apc->mem_res.start = res->start;
+- apc->mem_res.end = res->end;
+- apc->mem_res.flags = IORESOURCE_MEM;
+-
++ apc->np = pdev->dev.of_node;
+ apc->pci_controller.pci_ops = &ar724x_pci_ops;
+ apc->pci_controller.io_resource = &apc->io_res;
+ apc->pci_controller.mem_resource = &apc->mem_res;
++ pci_load_of_ranges(&apc->pci_controller, pdev->dev.of_node);
+
+ /*
+ * Do the full PCIE Root Complex Initialization Sequence if the PCIe
+@@ -435,10 +425,16 @@ static int ar724x_pci_probe(struct platf
+ return 0;
+ }
+
++static const struct of_device_id ar724x_pci_ids[] = {
++ { .compatible = "qcom,ar7240-pci" },
++ {},
++};
++
+ static struct platform_driver ar724x_pci_driver = {
+ .probe = ar724x_pci_probe,
+ .driver = {
+ .name = "ar724x-pci",
++ .of_match_table = of_match_ptr(ar724x_pci_ids),
+ },
+ };
+
diff --git a/target/linux/ath79/patches-5.10/0032-MIPS-ath79-sanitize-symbols.patch b/target/linux/ath79/patches-5.10/0032-MIPS-ath79-sanitize-symbols.patch
new file mode 100644
index 0000000000..14dddd5147
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0032-MIPS-ath79-sanitize-symbols.patch
@@ -0,0 +1,93 @@
+From 3fc8585cf76022dba7496627074d42af88c30718 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Sat, 23 Jun 2018 15:16:55 +0200
+Subject: [PATCH 32/33] MIPS: ath79: sanitize symbols
+
+We no longer need to select which SoCs are supported as the whole arch
+code is always built. So lets drop all the SoC symbols
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/mips/Kconfig | 2 ++
+ arch/mips/ath79/Kconfig | 44 +++++---------------------------------------
+ arch/mips/pci/Makefile | 2 +-
+ 3 files changed, 8 insertions(+), 40 deletions(-)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -217,6 +217,8 @@ config ATH79
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_MIPS16
+ select SYS_SUPPORTS_ZBOOT_UART_PROM
++ select HAVE_PCI
++ select USB_ARCH_HAS_EHCI
+ select USE_OF
+ select USB_EHCI_ROOT_HUB_TT if USB_EHCI_HCD_PLATFORM
+ help
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -1,48 +1,14 @@
+ # SPDX-License-Identifier: GPL-2.0
+ if ATH79
+
+-config SOC_AR71XX
+- select HAVE_PCI
+- def_bool n
+-
+-config SOC_AR724X
+- select HAVE_PCI
+- select PCI_AR724X if PCI
+- def_bool n
+-
+-config SOC_AR913X
+- def_bool n
+-
+-config SOC_AR933X
+- def_bool n
+-
+-config SOC_AR934X
+- select HAVE_PCI
+- select PCI_AR724X if PCI
+- def_bool n
+-
+-config SOC_QCA955X
+- select HAVE_PCI
+- select PCI_AR724X if PCI
++config PCI_AR71XX
++ bool "PCI support for AR7100 type SoCs"
++ depends on PCI
+ def_bool n
+
+ config PCI_AR724X
+- def_bool n
+-
+-config ATH79_DEV_GPIO_BUTTONS
+- def_bool n
+-
+-config ATH79_DEV_LEDS_GPIO
+- def_bool n
+-
+-config ATH79_DEV_SPI
+- def_bool n
+-
+-config ATH79_DEV_USB
+- def_bool n
+-
+-config ATH79_DEV_WMAC
+- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
++ bool "PCI support for AR724x type SoCs"
++ depends on PCI
+ def_bool n
+
+ endif
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -23,7 +23,7 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o
+ ops-bcm63xx.o
+ obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
+ obj-$(CONFIG_PCI_AR2315) += pci-ar2315.o
+-obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o
++obj-$(CONFIG_PCI_AR71XX) += pci-ar71xx.o
+ obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o
+ obj-$(CONFIG_MIPS_PCI_VIRTIO) += pci-virtio-guest.o
+ obj-$(CONFIG_PCI_XTALK_BRIDGE) += pci-xtalk-bridge.o
diff --git a/target/linux/ath79/patches-5.10/0033-spi-ath79-drop-pdata-support.patch b/target/linux/ath79/patches-5.10/0033-spi-ath79-drop-pdata-support.patch
new file mode 100644
index 0000000000..8fd99bd333
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0033-spi-ath79-drop-pdata-support.patch
@@ -0,0 +1,71 @@
+From c4e197bbcecc7233aa9e553e7047fa50e4e1fe77 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Mon, 25 Jun 2018 15:52:34 +0200
+Subject: [PATCH 33/33] spi: ath79: drop pdata support
+
+The target is being converted to pure OF. We can therefore drop all of the
+platform data code from the driver.
+
+Cc: linux-spi@vger.kernel.org
+Acked-by: Mark Brown <broonie@kernel.org>
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ include/linux/platform_data/spi-ath79.h | 16 -------------------
+ drivers/spi/spi-ath79.c | 8 --------
+ 2 files changed, 27 deletions(-)
+ delete mode 100644 arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
+
+--- a/include/linux/platform_data/spi-ath79.h
++++ /dev/null
+@@ -1,16 +0,0 @@
+-/* SPDX-License-Identifier: GPL-2.0-only */
+-/*
+- * Platform data definition for Atheros AR71XX/AR724X/AR913X SPI controller
+- *
+- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+- */
+-
+-#ifndef _ATH79_SPI_PLATFORM_H
+-#define _ATH79_SPI_PLATFORM_H
+-
+-struct ath79_spi_platform_data {
+- unsigned bus_num;
+- unsigned num_chipselect;
+-};
+-
+-#endif /* _ATH79_SPI_PLATFORM_H */
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -19,7 +19,6 @@
+ #include <linux/bitops.h>
+ #include <linux/clk.h>
+ #include <linux/err.h>
+-#include <linux/platform_data/spi-ath79.h>
+
+ #define DRV_NAME "ath79-spi"
+
+@@ -138,7 +137,6 @@ static int ath79_spi_probe(struct platfo
+ {
+ struct spi_master *master;
+ struct ath79_spi *sp;
+- struct ath79_spi_platform_data *pdata;
+ unsigned long rate;
+ int ret;
+
+@@ -152,16 +150,10 @@ static int ath79_spi_probe(struct platfo
+ master->dev.of_node = pdev->dev.of_node;
+ platform_set_drvdata(pdev, sp);
+
+- pdata = dev_get_platdata(&pdev->dev);
+-
+ master->use_gpio_descriptors = true;
+ master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
+ master->setup = spi_bitbang_setup;
+ master->cleanup = spi_bitbang_cleanup;
+- if (pdata) {
+- master->bus_num = pdata->bus_num;
+- master->num_chipselect = pdata->num_chipselect;
+- }
+
+ sp->bitbang.master = master;
+ sp->bitbang.chipselect = ath79_spi_chipselect;
diff --git a/target/linux/ath79/patches-5.10/0034-MIPS-ath79-ath9k-exports.patch b/target/linux/ath79/patches-5.10/0034-MIPS-ath79-ath9k-exports.patch
new file mode 100644
index 0000000000..71acc22210
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0034-MIPS-ath79-ath9k-exports.patch
@@ -0,0 +1,27 @@
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -31,11 +31,13 @@ EXPORT_SYMBOL_GPL(ath79_ddr_freq);
+
+ enum ath79_soc_type ath79_soc;
+ unsigned int ath79_soc_rev;
++EXPORT_SYMBOL_GPL(ath79_soc_rev);
+
+ void __iomem *ath79_pll_base;
+ void __iomem *ath79_reset_base;
+ EXPORT_SYMBOL_GPL(ath79_reset_base);
+-static void __iomem *ath79_ddr_base;
++void __iomem *ath79_ddr_base;
++EXPORT_SYMBOL_GPL(ath79_ddr_base);
+ static void __iomem *ath79_ddr_wb_flush_base;
+ static void __iomem *ath79_ddr_pci_win_base;
+
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -149,6 +149,7 @@ void ath79_ddr_wb_flush(unsigned int reg
+ void ath79_ddr_set_pci_windows(void);
+
+ extern void __iomem *ath79_pll_base;
++extern void __iomem *ath79_ddr_base;
+ extern void __iomem *ath79_reset_base;
+
+ static inline void ath79_pll_wr(unsigned reg, u32 val)
diff --git a/target/linux/ath79/patches-5.10/0036-GPIO-add-named-gpio-exports.patch b/target/linux/ath79/patches-5.10/0036-GPIO-add-named-gpio-exports.patch
new file mode 100644
index 0000000000..d4ea379159
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0036-GPIO-add-named-gpio-exports.patch
@@ -0,0 +1,165 @@
+From 4267880319bc1a2270d352e0ded6d6386242a7ef Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 12 Aug 2014 20:49:27 +0200
+Subject: [PATCH 24/53] GPIO: add named gpio exports
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++
+ drivers/gpio/gpiolib-sysfs.c | 10 +++++-
+ include/asm-generic/gpio.h | 6 ++++
+ include/linux/gpio/consumer.h | 8 +++++
+ 4 files changed, 91 insertions(+), 1 deletion(-)
+
+--- a/drivers/gpio/gpiolib-of.c
++++ b/drivers/gpio/gpiolib-of.c
+@@ -19,6 +19,8 @@
+ #include <linux/pinctrl/pinctrl.h>
+ #include <linux/slab.h>
+ #include <linux/gpio/machine.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
+
+ #include "gpiolib.h"
+ #include "gpiolib-of.h"
+@@ -915,3 +917,68 @@ void of_gpiochip_remove(struct gpio_chip
+ {
+ of_node_put(chip->of_node);
+ }
++
++static struct of_device_id gpio_export_ids[] = {
++ { .compatible = "gpio-export" },
++ { /* sentinel */ }
++};
++
++static int of_gpio_export_probe(struct platform_device *pdev)
++{
++ struct device_node *np = pdev->dev.of_node;
++ struct device_node *cnp;
++ u32 val;
++ int nb = 0;
++
++ for_each_child_of_node(np, cnp) {
++ const char *name = NULL;
++ int gpio;
++ bool dmc;
++ int max_gpio = 1;
++ int i;
++
++ of_property_read_string(cnp, "gpio-export,name", &name);
++
++ if (!name)
++ max_gpio = of_gpio_count(cnp);
++
++ for (i = 0; i < max_gpio; i++) {
++ unsigned flags = 0;
++ enum of_gpio_flags of_flags;
++
++ gpio = of_get_gpio_flags(cnp, i, &of_flags);
++ if (!gpio_is_valid(gpio))
++ return gpio;
++
++ if (of_flags == OF_GPIO_ACTIVE_LOW)
++ flags |= GPIOF_ACTIVE_LOW;
++
++ if (!of_property_read_u32(cnp, "gpio-export,output", &val))
++ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
++ else
++ flags |= GPIOF_IN;
++
++ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
++ continue;
++
++ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
++ gpio_export_with_name(gpio, dmc, name);
++ nb++;
++ }
++ }
++
++ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
++
++ return 0;
++}
++
++static struct platform_driver gpio_export_driver = {
++ .driver = {
++ .name = "gpio-export",
++ .owner = THIS_MODULE,
++ .of_match_table = of_match_ptr(gpio_export_ids),
++ },
++ .probe = of_gpio_export_probe,
++};
++
++module_platform_driver(gpio_export_driver);
+--- a/drivers/gpio/gpiolib-sysfs.c
++++ b/drivers/gpio/gpiolib-sysfs.c
+@@ -563,7 +563,7 @@ static struct class gpio_class = {
+ *
+ * Returns zero on success, else an error.
+ */
+-int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
+ {
+ struct gpio_chip *chip;
+ struct gpio_device *gdev;
+@@ -625,6 +625,8 @@ int gpiod_export(struct gpio_desc *desc,
+ offset = gpio_chip_hwgpio(desc);
+ if (chip->names && chip->names[offset])
+ ioname = chip->names[offset];
++ if (name)
++ ioname = name;
+
+ dev = device_create_with_groups(&gpio_class, &gdev->dev,
+ MKDEV(0, 0), data, gpio_groups,
+@@ -646,6 +648,12 @@ err_unlock:
+ gpiod_dbg(desc, "%s: status %d\n", __func__, status);
+ return status;
+ }
++EXPORT_SYMBOL_GPL(__gpiod_export);
++
++int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
++{
++ return __gpiod_export(desc, direction_may_change, NULL);
++}
+ EXPORT_SYMBOL_GPL(gpiod_export);
+
+ static int match_export(struct device *dev, const void *desc)
+--- a/include/asm-generic/gpio.h
++++ b/include/asm-generic/gpio.h
+@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g
+ return gpiod_export(gpio_to_desc(gpio), direction_may_change);
+ }
+
++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
++static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
++{
++ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
++}
++
+ static inline int gpio_export_link(struct device *dev, const char *name,
+ unsigned gpio)
+ {
+--- a/include/linux/gpio/consumer.h
++++ b/include/linux/gpio/consumer.h
+@@ -668,6 +668,7 @@ static inline void devm_acpi_dev_remove_
+
+ #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
+
++int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
+ int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
+ int gpiod_export_link(struct device *dev, const char *name,
+ struct gpio_desc *desc);
+@@ -675,6 +676,13 @@ void gpiod_unexport(struct gpio_desc *de
+
+ #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
+
++static inline int _gpiod_export(struct gpio_desc *desc,
++ bool direction_may_change,
++ const char *name)
++{
++ return -ENOSYS;
++}
++
+ static inline int gpiod_export(struct gpio_desc *desc,
+ bool direction_may_change)
+ {
diff --git a/target/linux/ath79/patches-5.10/0036-MIPS-ath79-remove-irq-code-from-pci.patch b/target/linux/ath79/patches-5.10/0036-MIPS-ath79-remove-irq-code-from-pci.patch
new file mode 100644
index 0000000000..80fcd0a7f5
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0036-MIPS-ath79-remove-irq-code-from-pci.patch
@@ -0,0 +1,139 @@
+--- a/arch/mips/pci/pci-ar71xx.c
++++ b/arch/mips/pci/pci-ar71xx.c
+@@ -51,11 +51,9 @@
+ struct ar71xx_pci_controller {
+ struct device_node *np;
+ void __iomem *cfg_base;
+- int irq;
+ struct pci_controller pci_ctrl;
+ struct resource io_res;
+ struct resource mem_res;
+- struct irq_domain *domain;
+ };
+
+ /* Byte lane enable bits */
+@@ -227,104 +225,6 @@ static struct pci_ops ar71xx_pci_ops = {
+ .write = ar71xx_pci_write_config,
+ };
+
+-static void ar71xx_pci_irq_handler(struct irq_desc *desc)
+-{
+- void __iomem *base = ath79_reset_base;
+- struct irq_chip *chip = irq_desc_get_chip(desc);
+- struct ar71xx_pci_controller *apc = irq_desc_get_handler_data(desc);
+- u32 pending;
+-
+- chained_irq_enter(chip, desc);
+- pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) &
+- __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+-
+- if (pending & AR71XX_PCI_INT_DEV0)
+- generic_handle_irq(irq_linear_revmap(apc->domain, 1));
+-
+- else if (pending & AR71XX_PCI_INT_DEV1)
+- generic_handle_irq(irq_linear_revmap(apc->domain, 2));
+-
+- else if (pending & AR71XX_PCI_INT_DEV2)
+- generic_handle_irq(irq_linear_revmap(apc->domain, 3));
+-
+- else if (pending & AR71XX_PCI_INT_CORE)
+- generic_handle_irq(irq_linear_revmap(apc->domain, 4));
+-
+- else
+- spurious_interrupt();
+- chained_irq_exit(chip, desc);
+-}
+-
+-static void ar71xx_pci_irq_unmask(struct irq_data *d)
+-{
+- struct ar71xx_pci_controller *apc;
+- unsigned int irq;
+- void __iomem *base = ath79_reset_base;
+- u32 t;
+-
+- apc = irq_data_get_irq_chip_data(d);
+- irq = irq_linear_revmap(apc->domain, d->irq);
+-
+- t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+- __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+-
+- /* flush write */
+- __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+-}
+-
+-static void ar71xx_pci_irq_mask(struct irq_data *d)
+-{
+- struct ar71xx_pci_controller *apc;
+- unsigned int irq;
+- void __iomem *base = ath79_reset_base;
+- u32 t;
+-
+- apc = irq_data_get_irq_chip_data(d);
+- irq = irq_linear_revmap(apc->domain, d->irq);
+-
+- t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+- __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+-
+- /* flush write */
+- __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+-}
+-
+-static struct irq_chip ar71xx_pci_irq_chip = {
+- .name = "AR71XX PCI",
+- .irq_mask = ar71xx_pci_irq_mask,
+- .irq_unmask = ar71xx_pci_irq_unmask,
+- .irq_mask_ack = ar71xx_pci_irq_mask,
+-};
+-
+-static int ar71xx_pci_irq_map(struct irq_domain *d,
+- unsigned int irq, irq_hw_number_t hw)
+-{
+- struct ar71xx_pci_controller *apc = d->host_data;
+-
+- irq_set_chip_and_handler(irq, &ar71xx_pci_irq_chip, handle_level_irq);
+- irq_set_chip_data(irq, apc);
+-
+- return 0;
+-}
+-
+-static const struct irq_domain_ops ar71xx_pci_domain_ops = {
+- .xlate = irq_domain_xlate_onecell,
+- .map = ar71xx_pci_irq_map,
+-};
+-
+-static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc)
+-{
+- void __iomem *base = ath79_reset_base;
+-
+- __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+- __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS);
+-
+- apc->domain = irq_domain_add_linear(apc->np, AR71XX_PCI_IRQ_COUNT,
+- &ar71xx_pci_domain_ops, apc);
+- irq_set_chained_handler_and_data(apc->irq, ar71xx_pci_irq_handler,
+- apc);
+-}
+-
+ static void ar71xx_pci_reset(void)
+ {
+ ath79_device_reset_set(AR71XX_RESET_PCI_BUS | AR71XX_RESET_PCI_CORE);
+@@ -358,10 +258,6 @@ static int ar71xx_pci_probe(struct platf
+ if (IS_ERR(apc->cfg_base))
+ return PTR_ERR(apc->cfg_base);
+
+- apc->irq = platform_get_irq(pdev, 0);
+- if (apc->irq < 0)
+- return -EINVAL;
+-
+ ar71xx_pci_reset();
+
+ /* setup COMMAND register */
+@@ -372,8 +268,6 @@ static int ar71xx_pci_probe(struct platf
+ /* clear bus errors */
+ ar71xx_pci_check_error(apc, 1);
+
+- ar71xx_pci_irq_init(apc);
+-
+ apc->np = pdev->dev.of_node;
+ apc->pci_ctrl.pci_ops = &ar71xx_pci_ops;
+ apc->pci_ctrl.mem_resource = &apc->mem_res;
diff --git a/target/linux/ath79/patches-5.10/0037-missing-registers.patch b/target/linux/ath79/patches-5.10/0037-missing-registers.patch
new file mode 100644
index 0000000000..9067e4ca7b
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0037-missing-registers.patch
@@ -0,0 +1,21 @@
+commit f3ffac90bc7266b7d917616f3233f58e8c08a196
+Author: Christian Lamparter <chunkeey@gmail.com>
+Date: Fri Aug 10 23:24:47 2018 +0200
+
+ ath79: gmac: add parsers for rxd(v)- and tx(d|en)-delay for AR9344
+
+ Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -1226,6 +1226,10 @@
+ #define AR934X_ETH_CFG_RDV_DELAY BIT(16)
+ #define AR934X_ETH_CFG_RDV_DELAY_MASK 0x3
+ #define AR934X_ETH_CFG_RDV_DELAY_SHIFT 16
++#define AR934X_ETH_CFG_TXD_DELAY_MASK 0x3
++#define AR934X_ETH_CFG_TXD_DELAY_SHIFT 18
++#define AR934X_ETH_CFG_TXE_DELAY_MASK 0x3
++#define AR934X_ETH_CFG_TXE_DELAY_SHIFT 20
+
+ /*
+ * QCA953X GMAC Interface
diff --git a/target/linux/ath79/patches-5.10/0038-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch b/target/linux/ath79/patches-5.10/0038-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch
new file mode 100644
index 0000000000..bc09062dc5
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0038-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch
@@ -0,0 +1,90 @@
+From 60efe35257b063ce584968f9f80b437030ce6ba6 Mon Sep 17 00:00:00 2001
+From: David Bauer <mail@david-bauer.net>
+Date: Mon, 18 Mar 2019 00:54:06 +0100
+Subject: [PATCH] MIPS: ath79: add missing QCA955x GMAC registers
+
+This adds missing GMAC register definitions for the Qualcomm Atheros
+QCA955X series MIPS SoCs.
+
+They originate from the platforms U-Boot code and the AVM FRITZ!WLAN
+Repeater 450E's GPL tarball.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+---
+ .../mips/include/asm/mach-ath79/ar71xx_regs.h | 54 +++++++++++++++++++
+ 1 file changed, 54 insertions(+)
+
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -1246,7 +1246,12 @@
+ */
+
+ #define QCA955X_GMAC_REG_ETH_CFG 0x00
++#define QCA955X_GMAC_REG_SGMII_RESET 0x14
+ #define QCA955X_GMAC_REG_SGMII_SERDES 0x18
++#define QCA955X_GMAC_REG_MR_AN_CONTROL 0x1c
++#define QCA955X_GMAC_REG_MR_AN_STATUS 0x20
++#define QCA955X_GMAC_REG_SGMII_CONFIG 0x34
++#define QCA955X_GMAC_REG_SGMII_DEBUG 0x58
+
+ #define QCA955X_ETH_CFG_RGMII_EN BIT(0)
+ #define QCA955X_ETH_CFG_MII_GE0 BIT(1)
+@@ -1268,9 +1273,58 @@
+ #define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3
+ #define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20
+
++#define QCA955X_SGMII_RESET_RX_CLK_N_RESET 0
++#define QCA955X_SGMII_RESET_RX_CLK_N BIT(0)
++#define QCA955X_SGMII_RESET_TX_CLK_N BIT(1)
++#define QCA955X_SGMII_RESET_RX_125M_N BIT(2)
++#define QCA955X_SGMII_RESET_TX_125M_N BIT(3)
++#define QCA955X_SGMII_RESET_HW_RX_125M_N BIT(4)
++
+ #define QCA955X_SGMII_SERDES_LOCK_DETECT_STATUS BIT(15)
+ #define QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23
+ #define QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf
++
++#define QCA955X_MR_AN_CONTROL_SPEED_SEL1 BIT(6)
++#define QCA955X_MR_AN_CONTROL_DUPLEX_MODE BIT(8)
++#define QCA955X_MR_AN_CONTROL_RESTART_AN BIT(9)
++#define QCA955X_MR_AN_CONTROL_POWER_DOWN BIT(11)
++#define QCA955X_MR_AN_CONTROL_AN_ENABLE BIT(12)
++#define QCA955X_MR_AN_CONTROL_SPEED_SEL0 BIT(13)
++#define QCA955X_MR_AN_CONTROL_LOOPBACK BIT(14)
++#define QCA955X_MR_AN_CONTROL_PHY_RESET BIT(15)
++
++#define QCA955X_MR_AN_STATUS_EXT_CAP BIT(0)
++#define QCA955X_MR_AN_STATUS_LINK_UP BIT(2)
++#define QCA955X_MR_AN_STATUS_AN_ABILITY BIT(3)
++#define QCA955X_MR_AN_STATUS_REMOTE_FAULT BIT(4)
++#define QCA955X_MR_AN_STATUS_AN_COMPLETE BIT(5)
++#define QCA955X_MR_AN_STATUS_NO_PREAMBLE BIT(6)
++#define QCA955X_MR_AN_STATUS_BASE_PAGE BIT(7)
++
++#define QCA955X_SGMII_CONFIG_MODE_CTRL_SHIFT 0
++#define QCA955X_SGMII_CONFIG_MODE_CTRL_MASK 0x7
++#define QCA955X_SGMII_CONFIG_ENABLE_SGMII_TX_PAUSE BIT(3)
++#define QCA955X_SGMII_CONFIG_MR_REG4_CHANGED BIT(4)
++#define QCA955X_SGMII_CONFIG_FORCE_SPEED BIT(5)
++#define QCA955X_SGMII_CONFIG_SPEED_SHIFT 6
++#define QCA955X_SGMII_CONFIG_SPEED_MASK 0xc0
++#define QCA955X_SGMII_CONFIG_REMOTE_PHY_LOOPBACK BIT(8)
++#define QCA955X_SGMII_CONFIG_NEXT_PAGE_LOADED BIT(9)
++#define QCA955X_SGMII_CONFIG_MDIO_ENABLE BIT(10)
++#define QCA955X_SGMII_CONFIG_MDIO_PULSE BIT(11)
++#define QCA955X_SGMII_CONFIG_MDIO_COMPLETE BIT(12)
++#define QCA955X_SGMII_CONFIG_PRBS_ENABLE BIT(13)
++#define QCA955X_SGMII_CONFIG_BERT_ENABLE BIT(14)
++
++#define QCA955X_SGMII_DEBUG_TX_STATE_MASK 0xff
++#define QCA955X_SGMII_DEBUG_TX_STATE_SHIFT 0
++#define QCA955X_SGMII_DEBUG_RX_STATE_MASK 0xff00
++#define QCA955X_SGMII_DEBUG_RX_STATE_SHIFT 8
++#define QCA955X_SGMII_DEBUG_RX_SYNC_STATE_MASK 0xff0000
++#define QCA955X_SGMII_DEBUG_RX_SYNC_STATE_SHIFT 16
++#define QCA955X_SGMII_DEBUG_ARB_STATE_MASK 0xf000000
++#define QCA955X_SGMII_DEBUG_ARB_STATE_SHIFT 24
++
+ /*
+ * QCA956X GMAC Interface
+ */
diff --git a/target/linux/ath79/patches-5.10/0039-MIPS-ath79-export-UART1-reference-clock.patch b/target/linux/ath79/patches-5.10/0039-MIPS-ath79-export-UART1-reference-clock.patch
new file mode 100644
index 0000000000..edf888c7e7
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0039-MIPS-ath79-export-UART1-reference-clock.patch
@@ -0,0 +1,52 @@
+--- a/arch/mips/ath79/clock.c
++++ b/arch/mips/ath79/clock.c
+@@ -40,6 +40,7 @@ static const char * const clk_names[ATH7
+ [ATH79_CLK_AHB] = "ahb",
+ [ATH79_CLK_REF] = "ref",
+ [ATH79_CLK_MDIO] = "mdio",
++ [ATH79_CLK_UART1] = "uart1",
+ };
+
+ static const char * __init ath79_clk_name(int type)
+@@ -344,6 +345,9 @@ static void __init ar934x_clocks_init(vo
+ if (clk_ctrl & AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL)
+ ath79_set_clk(ATH79_CLK_MDIO, 100 * 1000 * 1000);
+
++ if (clk_ctrl & AR934X_PLL_SWITCH_CLOCK_CONTROL_UART1_CLK_SEL)
++ ath79_set_clk(ATH79_CLK_UART1, 100 * 1000 * 1000);
++
+ iounmap(dpll_base);
+ }
+
+@@ -649,6 +653,9 @@ static void __init ath79_clocks_init_dt(
+ if (!clks[ATH79_CLK_MDIO])
+ clks[ATH79_CLK_MDIO] = clks[ATH79_CLK_REF];
+
++ if (!clks[ATH79_CLK_UART1])
++ clks[ATH79_CLK_UART1] = clks[ATH79_CLK_REF];
++
+ if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) {
+ pr_err("%pOF: could not register clk provider\n", np);
+ goto err_iounmap;
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -348,6 +348,7 @@
+ #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
+
+ #define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6)
++#define AR934X_PLL_SWITCH_CLOCK_CONTROL_UART1_CLK_SEL BIT(7)
+
+ #define QCA953X_PLL_CPU_CONFIG_REG 0x00
+ #define QCA953X_PLL_DDR_CONFIG_REG 0x04
+--- a/include/dt-bindings/clock/ath79-clk.h
++++ b/include/dt-bindings/clock/ath79-clk.h
+@@ -11,7 +11,8 @@
+ #define ATH79_CLK_AHB 2
+ #define ATH79_CLK_REF 3
+ #define ATH79_CLK_MDIO 4
++#define ATH79_CLK_UART1 5
+
+-#define ATH79_CLK_END 5
++#define ATH79_CLK_END 6
+
+ #endif /* __DT_BINDINGS_ATH79_CLK_H */
diff --git a/target/linux/ath79/patches-5.10/004-register_gpio_driver_earlier.patch b/target/linux/ath79/patches-5.10/004-register_gpio_driver_earlier.patch
new file mode 100644
index 0000000000..fa4b05f724
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/004-register_gpio_driver_earlier.patch
@@ -0,0 +1,18 @@
+HACK: register the GPIO driver earlier to ensure that gpio_request calls
+from mach files succeed.
+
+--- a/drivers/gpio/gpio-ath79.c
++++ b/drivers/gpio/gpio-ath79.c
+@@ -310,7 +310,11 @@ static struct platform_driver ath79_gpio
+ .probe = ath79_gpio_probe,
+ };
+
+-module_platform_driver(ath79_gpio_driver);
++static int __init ath79_gpio_init(void)
++{
++ return platform_driver_register(&ath79_gpio_driver);
++}
++postcore_initcall(ath79_gpio_init);
+
+ MODULE_DESCRIPTION("Atheros AR71XX/AR724X/AR913X GPIO API support");
+ MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ath79/patches-5.10/0050-spi-ath79-remove-spi-master-setup-and-cleanup-assign.patch b/target/linux/ath79/patches-5.10/0050-spi-ath79-remove-spi-master-setup-and-cleanup-assign.patch
new file mode 100644
index 0000000000..a57ac24f29
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0050-spi-ath79-remove-spi-master-setup-and-cleanup-assign.patch
@@ -0,0 +1,28 @@
+From b142b1beb199f62d47370c98a3dd8e13f792e9c0 Mon Sep 17 00:00:00 2001
+From: David Bauer <mail@david-bauer.net>
+Date: Thu, 27 Feb 2020 23:03:20 +0100
+Subject: [PATCH] spi: ath79: remove spi-master setup and cleanup assignment
+
+This removes the assignment of setup and cleanup functions for the ath79
+target. Assigning the setup-method will lead to 'setup_transfer' not
+being assigned in spi_bitbang_init.
+
+Also drop the redundant cleanup assignment, as this also happens in
+spi_bitbang_init.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+---
+ drivers/spi/spi-ath79.c | 2 --
+ 1 file changed, 2 deletions(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -152,8 +152,6 @@ static int ath79_spi_probe(struct platfo
+
+ master->use_gpio_descriptors = true;
+ master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
+- master->setup = spi_bitbang_setup;
+- master->cleanup = spi_bitbang_cleanup;
+
+ sp->bitbang.master = master;
+ sp->bitbang.chipselect = ath79_spi_chipselect;
diff --git a/target/linux/ath79/patches-5.10/0051-spi-ath79-always-call-chipselect-function.patch b/target/linux/ath79/patches-5.10/0051-spi-ath79-always-call-chipselect-function.patch
new file mode 100644
index 0000000000..746f9035a6
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0051-spi-ath79-always-call-chipselect-function.patch
@@ -0,0 +1,21 @@
+From: David Bauer <mail@david-bauer.net>
+Date: Wed, 17 Feb 2021 02:44:55 +0100
+Subject: [PATCH] spi: ath79: always call chipselect function
+
+api-bitbang has to call the chipselect function on the ath79 SPI driver
+in order to communicate with the SPI slave device.
+
+Fixes commit 4a07b8bcd503 ("spi: bitbang: Make chipselect callback optional")
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -152,6 +152,7 @@ static int ath79_spi_probe(struct platfo
+
+ master->use_gpio_descriptors = true;
+ master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
++ master->flags = SPI_MASTER_GPIO_SS;
+
+ sp->bitbang.master = master;
+ sp->bitbang.chipselect = ath79_spi_chipselect;
diff --git a/target/linux/ath79/patches-5.10/0052-mtd-spi-nor-add-block-protection-flags-to-macronix.patch b/target/linux/ath79/patches-5.10/0052-mtd-spi-nor-add-block-protection-flags-to-macronix.patch
new file mode 100644
index 0000000000..d416276f0d
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0052-mtd-spi-nor-add-block-protection-flags-to-macronix.patch
@@ -0,0 +1,26 @@
+From 158f9796335b393980afb8e9796eb8d44106652a Mon Sep 17 00:00:00 2001
+From: David Bauer <mail@david-bauer.net>
+Date: Mon, 26 Oct 2020 15:10:47 +0100
+Subject: [PATCH 1/2] mtd: spi-nor: add block protection flags to macronix
+
+Macronix flash chips support block protection by using BP bits in the
+read status register. Add the corresponding flag to indicate block
+protection support.
+
+Otherwise, locked blocks are not unlocked when requested.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+---
+ drivers/mtd/spi-nor/macronix.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/mtd/spi-nor/macronix.c
++++ b/drivers/mtd/spi-nor/macronix.c
+@@ -94,6 +94,7 @@ static const struct flash_info macronix_
+
+ static void macronix_default_init(struct spi_nor *nor)
+ {
++ nor->flags |= SNOR_F_HAS_LOCK;
+ nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
+ nor->params->set_4byte_addr_mode = spi_nor_set_4byte_addr_mode;
+ nor->flags |= SNOR_F_HAS_LOCK;
diff --git a/target/linux/ath79/patches-5.10/0053-mtd-spi-nor-use-4-bit-BP-for-large-Macronix-flash.patch b/target/linux/ath79/patches-5.10/0053-mtd-spi-nor-use-4-bit-BP-for-large-Macronix-flash.patch
new file mode 100644
index 0000000000..bb393e52eb
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0053-mtd-spi-nor-use-4-bit-BP-for-large-Macronix-flash.patch
@@ -0,0 +1,85 @@
+From 59f88b8d4447be809d0b5e7a283290d06848d3bc Mon Sep 17 00:00:00 2001
+From: David Bauer <mail@david-bauer.net>
+Date: Sun, 25 Oct 2020 01:14:22 +0200
+Subject: [PATCH 2/2] mtd: spi-nor: use 4 bit BP for large Macronix flash
+
+Macronix SPI-NOR chips with 128 or more 64k blocks have 4 block
+protection bits in their status register. Add the corresponding
+flag in order to clear these bits when unloking the flash.
+
+Otherwise, the flash might not be writable depending on the state the
+bootloader left the flash in.
+
+Fixes commit 62593cf40b23 ("mtd: spi-nor: refactor block protection functions")
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+---
+ drivers/mtd/spi-nor/macronix.c | 31 ++++++++++++++++++-------------
+ 1 file changed, 18 insertions(+), 13 deletions(-)
+
+--- a/drivers/mtd/spi-nor/macronix.c
++++ b/drivers/mtd/spi-nor/macronix.c
+@@ -50,8 +50,8 @@ static const struct flash_info macronix_
+ { "mx25u4035", INFO(0xc22533, 0, 64 * 1024, 8, SECT_4K) },
+ { "mx25u8035", INFO(0xc22534, 0, 64 * 1024, 16, SECT_4K) },
+ { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
+- { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, SECT_4K) },
+- { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
++ { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_4BIT_BP) },
++ { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, SPI_NOR_4BIT_BP) },
+ { "mx25r1635f", INFO(0xc22815, 0, 64 * 1024, 32,
+ SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+@@ -60,36 +60,41 @@ static const struct flash_info macronix_
+ SPI_NOR_QUAD_READ) },
+ { "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256,
+ SECT_4K | SPI_NOR_DUAL_READ |
+- SPI_NOR_QUAD_READ) },
++ SPI_NOR_QUAD_READ | SPI_NOR_4BIT_BP) },
+ { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512,
+- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
++ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
++ SPI_NOR_4BIT_BP)
+ .fixups = &mx25l25635_fixups },
+ { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512,
+- SECT_4K | SPI_NOR_4B_OPCODES) },
++ SECT_4K | SPI_NOR_4B_OPCODES |
++ SPI_NOR_4BIT_BP) },
+ { "mx25u51245g", INFO(0xc2253a, 0, 64 * 1024, 1024,
+ SECT_4K | SPI_NOR_DUAL_READ |
+- SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
++ SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES |
++ SPI_NOR_4BIT_BP) },
+ { "mx25v8035f", INFO(0xc22314, 0, 64 * 1024, 16,
+ SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+- { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
++ { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, SPI_NOR_4BIT_BP) },
+ { "mx25l51245g", INFO(0xc2201a, 0, 64 * 1024, 1024,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+- SPI_NOR_4B_OPCODES) },
++ SPI_NOR_4B_OPCODES | SPI_NOR_4BIT_BP) },
+ { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+- SPI_NOR_4B_OPCODES) },
++ SPI_NOR_4B_OPCODES | SPI_NOR_4BIT_BP) },
+ { "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024,
+ SECT_4K | SPI_NOR_DUAL_READ |
+- SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
++ SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES |
++ SPI_NOR_4BIT_BP) },
+ { "mx66l1g45g", INFO(0xc2201b, 0, 64 * 1024, 2048,
+ SECT_4K | SPI_NOR_DUAL_READ |
+- SPI_NOR_QUAD_READ) },
++ SPI_NOR_QUAD_READ | SPI_NOR_4BIT_BP) },
+ { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048,
+- SPI_NOR_QUAD_READ) },
++ SPI_NOR_QUAD_READ | SPI_NOR_4BIT_BP) },
+ { "mx66u2g45g", INFO(0xc2253c, 0, 64 * 1024, 4096,
+ SECT_4K | SPI_NOR_DUAL_READ |
+- SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
++ SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES |
++ SPI_NOR_4BIT_BP) },
+ };
+
+ static void macronix_default_init(struct spi_nor *nor)
diff --git a/target/linux/ath79/patches-5.10/0054-spi-always-write-cs.patch b/target/linux/ath79/patches-5.10/0054-spi-always-write-cs.patch
new file mode 100644
index 0000000000..1e461cee0a
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0054-spi-always-write-cs.patch
@@ -0,0 +1,31 @@
+Upstream commit d40f0b6f2e21 ("spi: Avoid settingthe chip select if
+we don't need to") causes the SPI CS only to be asserted once and not
+if it's state stays the same.
+
+This seems to cause problems with the SPI on the AR724x and the AR913x
+(but not the AR71xx). AR934x and subsequent chips do not look affected.
+
+ToDo:
+ - Analyze if this is a hardware bug or a bug in the software.
+ - Send a cleaned up patch upstream.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+
+--- a/drivers/spi/spi.c
++++ b/drivers/spi/spi.c
+@@ -791,6 +791,7 @@ static void spi_set_cs(struct spi_device
+ {
+ bool enable1 = enable;
+
++#if 0
+ /*
+ * Avoid calling into the driver (or doing delays) if the chip select
+ * isn't actually changing from the last time this was called.
+@@ -801,6 +802,7 @@ static void spi_set_cs(struct spi_device
+
+ spi->controller->last_cs_enable = enable;
+ spi->controller->last_cs_mode_high = spi->mode & SPI_CS_HIGH;
++#endif
+
+ if (!spi->controller->set_cs_timing) {
+ if (enable1)
diff --git a/target/linux/ath79/patches-5.10/0062-MIPS-pci-ar724x-add-QCA9550-reset-sequence.patch b/target/linux/ath79/patches-5.10/0062-MIPS-pci-ar724x-add-QCA9550-reset-sequence.patch
new file mode 100644
index 0000000000..13955c62a2
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0062-MIPS-pci-ar724x-add-QCA9550-reset-sequence.patch
@@ -0,0 +1,130 @@
+From: David Bauer <mail@david-bauer.net>
+Date: Sat, 11 Apr 2020 14:03:12 +0200
+Subject: MIPS: pci-ar724x: add QCA9550 reset sequence
+
+The QCA9550 family of SoCs have a slightly different reset
+sequence compared to older chips.
+
+Normally the bootloader performs this sequence, however
+some bootloader implementation expect the operating system
+to clear the reset.
+
+Also get the resets from OF to support handling of the second
+PCIe root-complex on the QCA9558.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -391,6 +391,7 @@
+ #define QCA955X_PLL_CPU_CONFIG_REG 0x00
+ #define QCA955X_PLL_DDR_CONFIG_REG 0x04
+ #define QCA955X_PLL_CLK_CTRL_REG 0x08
++#define QCA955X_PLL_PCIE_CONFIG_REG 0x0c
+ #define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28
+ #define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48
+ #define QCA955X_PLL_ETH_SGMII_SERDES_REG 0x4c
+@@ -476,6 +477,9 @@
+ #define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL BIT(21)
+ #define QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
+
++#define QCA955X_PLL_PCIE_CONFIG_PLL_PWD BIT(30)
++#define QCA955X_PLL_PCIE_CONFIG_PLL_BYPASS BIT(16)
++
+ #define QCA956X_PLL_SWITCH_CLOCK_SPARE_I2C_CLK_SELB BIT(5)
+ #define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL0_1 BIT(6)
+ #define QCA956X_PLL_SWITCH_CLOCK_SPARE_UART1_CLK_SEL BIT(7)
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -8,6 +8,7 @@
+
+ #include <linux/irq.h>
+ #include <linux/pci.h>
++#include <linux/reset.h>
+ #include <linux/init.h>
+ #include <linux/delay.h>
+ #include <linux/platform_device.h>
+@@ -55,6 +56,9 @@ struct ar724x_pci_controller {
+ struct irq_domain *domain;
+ struct resource io_res;
+ struct resource mem_res;
++
++ struct reset_control *hc_reset;
++ struct reset_control *phy_reset;
+ };
+
+ static struct irq_chip ar724x_pci_irq_chip;
+@@ -340,18 +344,30 @@ static void ar724x_pci_hw_init(struct ar
+ int wait = 0;
+
+ /* deassert PCIe host controller and PCIe PHY reset */
+- ath79_device_reset_clear(AR724X_RESET_PCIE);
+- ath79_device_reset_clear(AR724X_RESET_PCIE_PHY);
++ reset_control_deassert(apc->hc_reset);
++ reset_control_deassert(apc->phy_reset);
+
+- /* remove the reset of the PCIE PLL */
+- ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
+- ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET;
+- ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
+-
+- /* deassert bypass for the PCIE PLL */
+- ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
+- ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
+- ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
++ if (of_device_is_compatible(apc->np, "qcom,qca9550-pci")) {
++ /* remove the reset of the PCIE PLL */
++ ppl = ath79_pll_rr(QCA955X_PLL_PCIE_CONFIG_REG);
++ ppl &= ~QCA955X_PLL_PCIE_CONFIG_PLL_PWD;
++ ath79_pll_wr(QCA955X_PLL_PCIE_CONFIG_REG, ppl);
++
++ /* deassert bypass for the PCIE PLL */
++ ppl = ath79_pll_rr(QCA955X_PLL_PCIE_CONFIG_REG);
++ ppl &= ~QCA955X_PLL_PCIE_CONFIG_PLL_BYPASS;
++ ath79_pll_wr(QCA955X_PLL_PCIE_CONFIG_REG, ppl);
++ } else {
++ /* remove the reset of the PCIE PLL */
++ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
++ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET;
++ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
++
++ /* deassert bypass for the PCIE PLL */
++ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
++ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
++ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
++ }
+
+ /* set PCIE Application Control to ready */
+ app = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_APP);
+@@ -399,6 +415,14 @@ static int ar724x_pci_probe(struct platf
+ if (apc->irq < 0)
+ return -EINVAL;
+
++ apc->hc_reset = devm_reset_control_get_exclusive(&pdev->dev, "hc");
++ if (IS_ERR(apc->hc_reset))
++ return PTR_ERR(apc->hc_reset);
++
++ apc->phy_reset = devm_reset_control_get_exclusive(&pdev->dev, "phy");
++ if (IS_ERR(apc->phy_reset))
++ return PTR_ERR(apc->phy_reset);
++
+ apc->np = pdev->dev.of_node;
+ apc->pci_controller.pci_ops = &ar724x_pci_ops;
+ apc->pci_controller.io_resource = &apc->io_res;
+@@ -409,7 +433,7 @@ static int ar724x_pci_probe(struct platf
+ * Do the full PCIE Root Complex Initialization Sequence if the PCIe
+ * host controller is in reset.
+ */
+- if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE)
++ if (reset_control_status(apc->hc_reset))
+ ar724x_pci_hw_init(apc);
+
+ apc->link_up = ar724x_pci_check_link(apc);
+@@ -427,6 +451,7 @@ static int ar724x_pci_probe(struct platf
+
+ static const struct of_device_id ar724x_pci_ids[] = {
+ { .compatible = "qcom,ar7240-pci" },
++ { .compatible = "qcom,qca9550-pci" },
+ {},
+ };
+
diff --git a/target/linux/ath79/patches-5.10/404-mtd-cybertan-trx-parser.patch b/target/linux/ath79/patches-5.10/404-mtd-cybertan-trx-parser.patch
new file mode 100644
index 0000000000..1ebf87c610
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/404-mtd-cybertan-trx-parser.patch
@@ -0,0 +1,27 @@
+--- a/drivers/mtd/parsers/Makefile
++++ b/drivers/mtd/parsers/Makefile
+@@ -5,6 +5,7 @@ obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm6
+ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+ obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
++obj-$(CONFIG_MTD_PARSER_CYBERTAN) += parser_cybertan.o
+ obj-$(CONFIG_MTD_PARSER_IMAGETAG) += parser_imagetag.o
+ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
+ obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o
+--- a/drivers/mtd/parsers/Kconfig
++++ b/drivers/mtd/parsers/Kconfig
+@@ -83,6 +83,14 @@ config MTD_OF_PARTS
+ flash memory node, as described in
+ Documentation/devicetree/bindings/mtd/partition.txt.
+
++config MTD_PARSER_CYBERTAN
++ tristate "Parser for Cybertan format partitions"
++ depends on MTD && (ATH79 || COMPILE_TEST)
++ help
++ Cybertan has a proprietory header than encompasses a Broadcom trx
++ header. This driver will parse the header and take care of the
++ special offsets that result in the extra headers.
++
+ config MTD_PARSER_IMAGETAG
+ tristate "Parser for BCM963XX Image Tag format partitions"
+ depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
diff --git a/target/linux/ath79/patches-5.10/408-mtd-redboot_partition_scan.patch b/target/linux/ath79/patches-5.10/408-mtd-redboot_partition_scan.patch
new file mode 100644
index 0000000000..8f3ee32f57
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/408-mtd-redboot_partition_scan.patch
@@ -0,0 +1,44 @@
+--- a/drivers/mtd/parsers/redboot.c
++++ b/drivers/mtd/parsers/redboot.c
+@@ -85,12 +85,18 @@ static int parse_redboot_partitions(stru
+
+ parse_redboot_of(master);
+
++ buf = vmalloc(master->erasesize);
++ if (!buf)
++ return -ENOMEM;
++
++ restart:
+ if ( directory < 0 ) {
+ offset = master->size + directory * master->erasesize;
+ while (mtd_block_isbad(master, offset)) {
+ if (!offset) {
+ nogood:
+ printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
++ vfree(buf);
+ return -EIO;
+ }
+ offset -= master->erasesize;
+@@ -103,10 +109,6 @@ static int parse_redboot_partitions(stru
+ goto nogood;
+ }
+ }
+- buf = vmalloc(master->erasesize);
+-
+- if (!buf)
+- return -ENOMEM;
+
+ printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+ master->name, offset);
+@@ -179,6 +181,11 @@ static int parse_redboot_partitions(stru
+ }
+ if (i == numslots) {
+ /* Didn't find it */
++ if (offset + master->erasesize < master->size) {
++ /* not at the end of the flash yet, maybe next block :) */
++ directory++;
++ goto restart;
++ }
+ printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
+ master->name);
+ ret = 0;
diff --git a/target/linux/ath79/patches-5.10/410-spi-ath79-Implement-the-spi_mem-interface.patch b/target/linux/ath79/patches-5.10/410-spi-ath79-Implement-the-spi_mem-interface.patch
new file mode 100644
index 0000000000..2a6b9857fb
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/410-spi-ath79-Implement-the-spi_mem-interface.patch
@@ -0,0 +1,68 @@
+From 8d8cdb4a6ccee5b62cc0dc64651c3946364514dc Mon Sep 17 00:00:00 2001
+From: Luiz Angelo Daros de Luca <luizluca@gmail.com>
+Date: Mon, 10 Feb 2020 16:11:27 -0300
+Subject: [PATCH] spi: ath79: Implement the spi_mem interface
+
+Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
+---
+ drivers/spi/spi-ath79.c | 35 +++++++++++++++++++++++++++++++++++
+ 1 file changed, 35 insertions(+)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -15,6 +15,7 @@
+ #include <linux/platform_device.h>
+ #include <linux/io.h>
+ #include <linux/spi/spi.h>
++#include <linux/spi/spi-mem.h>
+ #include <linux/spi/spi_bitbang.h>
+ #include <linux/bitops.h>
+ #include <linux/clk.h>
+@@ -133,6 +134,39 @@ static u32 ath79_spi_txrx_mode0(struct s
+ return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS);
+ }
+
++static int ath79_exec_mem_op(struct spi_mem *mem,
++ const struct spi_mem_op *op)
++{
++ struct ath79_spi *sp = ath79_spidev_to_sp(mem->spi);
++
++ /* Ensures that reading is performed on device connected
++ to hardware cs0 */
++ if (mem->spi->chip_select || mem->spi->cs_gpiod)
++ return -ENOTSUPP;
++
++ /* Only use for fast-read op. */
++ if (op->cmd.opcode != 0x0b || op->data.dir != SPI_MEM_DATA_IN ||
++ op->addr.nbytes != 3 || op->dummy.nbytes != 1)
++ return -ENOTSUPP;
++
++ /* disable GPIO mode */
++ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
++
++ memcpy_fromio(op->data.buf.in, sp->base + op->addr.val, op->data.nbytes);
++
++ /* enable GPIO mode */
++ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
++
++ /* restore IOC register */
++ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
++
++ return 0;
++}
++
++static const struct spi_controller_mem_ops ath79_mem_ops = {
++ .exec_op = ath79_exec_mem_op,
++};
++
+ static int ath79_spi_probe(struct platform_device *pdev)
+ {
+ struct spi_master *master;
+@@ -163,6 +197,7 @@ static int ath79_spi_probe(struct platfo
+ ret = PTR_ERR(sp->base);
+ goto err_put_master;
+ }
++ master->mem_ops = &ath79_mem_ops;
+
+ sp->clk = devm_clk_get(&pdev->dev, "ahb");
+ if (IS_ERR(sp->clk)) {
diff --git a/target/linux/ath79/patches-5.10/420-net-use-downstream-ag71xx.patch b/target/linux/ath79/patches-5.10/420-net-use-downstream-ag71xx.patch
new file mode 100644
index 0000000000..7ce3f0d29c
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/420-net-use-downstream-ag71xx.patch
@@ -0,0 +1,28 @@
+--- a/drivers/net/ethernet/atheros/Kconfig
++++ b/drivers/net/ethernet/atheros/Kconfig
+@@ -17,13 +17,7 @@ config NET_VENDOR_ATHEROS
+
+ if NET_VENDOR_ATHEROS
+
+-config AG71XX
+- tristate "Atheros AR7XXX/AR9XXX built-in ethernet mac support"
+- depends on ATH79
+- select PHYLINK
+- help
+- If you wish to compile a kernel for AR7XXX/91XXX and enable
+- ethernet support, then you should always answer Y to this.
++source "drivers/net/ethernet/atheros/ag71xx/Kconfig"
+
+ config ATL2
+ tristate "Atheros L2 Fast Ethernet support"
+--- a/drivers/net/ethernet/atheros/Makefile
++++ b/drivers/net/ethernet/atheros/Makefile
+@@ -3,7 +3,7 @@
+ # Makefile for the Atheros network device drivers.
+ #
+
+-obj-$(CONFIG_AG71XX) += ag71xx.o
++obj-$(CONFIG_AG71XX) += ag71xx/
+ obj-$(CONFIG_ATL1) += atlx/
+ obj-$(CONFIG_ATL2) += atlx/
+ obj-$(CONFIG_ATL1E) += atl1e/
diff --git a/target/linux/ath79/patches-5.10/425-at803x-allow-sgmii-aneg-override.patch b/target/linux/ath79/patches-5.10/425-at803x-allow-sgmii-aneg-override.patch
new file mode 100644
index 0000000000..396b1ee7a2
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/425-at803x-allow-sgmii-aneg-override.patch
@@ -0,0 +1,16 @@
+--- a/drivers/net/phy/at803x.c
++++ b/drivers/net/phy/at803x.c
+@@ -383,6 +383,13 @@ static int at803x_aneg_done(struct phy_d
+ if (!(phy_read(phydev, AT803X_PSSR) & AT803X_PSSR_MR_AN_COMPLETE)) {
+ phydev_warn(phydev, "803x_aneg_done: SGMII link is not ok\n");
+ aneg_done = 0;
++#ifdef CONFIG_OF_MDIO
++ if (phydev->mdio.dev.of_node &&
++ of_property_read_bool(phydev->mdio.dev.of_node,
++ "at803x-override-sgmii-link-check")) {
++ aneg_done = 1;
++ }
++#endif
+ }
+ /* switch back to copper page */
+ phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);
diff --git a/target/linux/ath79/patches-5.10/430-drivers-link-spi-before-mtd.patch b/target/linux/ath79/patches-5.10/430-drivers-link-spi-before-mtd.patch
new file mode 100644
index 0000000000..4c6558db90
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/430-drivers-link-spi-before-mtd.patch
@@ -0,0 +1,12 @@
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -80,8 +80,8 @@ obj-y += scsi/
+ obj-y += nvme/
+ obj-$(CONFIG_ATA) += ata/
+ obj-$(CONFIG_TARGET_CORE) += target/
+-obj-$(CONFIG_MTD) += mtd/
+ obj-$(CONFIG_SPI) += spi/
++obj-$(CONFIG_MTD) += mtd/
+ obj-$(CONFIG_SPMI) += spmi/
+ obj-$(CONFIG_HSI) += hsi/
+ obj-$(CONFIG_SLIMBUS) += slimbus/
diff --git a/target/linux/ath79/patches-5.10/440-mtd-ar934x-nand-driver.patch b/target/linux/ath79/patches-5.10/440-mtd-ar934x-nand-driver.patch
new file mode 100644
index 0000000000..1e2d573ebf
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/440-mtd-ar934x-nand-driver.patch
@@ -0,0 +1,25 @@
+--- a/drivers/mtd/nand/raw/Kconfig
++++ b/drivers/mtd/nand/raw/Kconfig
+@@ -556,4 +556,12 @@ config MTD_NAND_DISKONCHIP_BBTWRITE
+ load time (assuming you build diskonchip as a module) with the module
+ parameter "inftl_bbt_write=1".
+
++config MTD_NAND_AR934X
++ tristate "Support for NAND controller on Qualcomm Atheros AR934x/QCA955x SoCs"
++ depends on ATH79 || COMPILE_TEST
++ depends on HAS_IOMEM
++ help
++ Enables support for NAND controller on Qualcomm Atheros SoCs.
++ This controller is found on AR934x and QCA955x SoCs.
++
+ endif # MTD_RAW_NAND
+--- a/drivers/mtd/nand/raw/Makefile
++++ b/drivers/mtd/nand/raw/Makefile
+@@ -58,6 +58,7 @@ obj-$(CONFIG_MTD_NAND_STM32_FMC2) += stm
+ obj-$(CONFIG_MTD_NAND_MESON) += meson_nand.o
+ obj-$(CONFIG_MTD_NAND_CADENCE) += cadence-nand-controller.o
+ obj-$(CONFIG_MTD_NAND_ARASAN) += arasan-nand-controller.o
++obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nand.o
+
+ nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
+ nand-objs += nand_onfi.o
diff --git a/target/linux/ath79/patches-5.10/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch b/target/linux/ath79/patches-5.10/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
new file mode 100644
index 0000000000..924faec509
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
@@ -0,0 +1,98 @@
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ath79/mangle-port.h
+@@ -0,0 +1,37 @@
++/*
++ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h
++ * Copyright (C) 2003, 2004 Ralf Baechle
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H
++#define __ASM_MACH_ATH79_MANGLE_PORT_H
++
++#ifdef CONFIG_PCI_AR71XX
++extern unsigned long (ath79_pci_swizzle_b)(unsigned long port);
++extern unsigned long (ath79_pci_swizzle_w)(unsigned long port);
++#else
++#define ath79_pci_swizzle_b(port) (port)
++#define ath79_pci_swizzle_w(port) (port)
++#endif
++
++#define __swizzle_addr_b(port) ath79_pci_swizzle_b(port)
++#define __swizzle_addr_w(port) ath79_pci_swizzle_w(port)
++#define __swizzle_addr_l(port) (port)
++#define __swizzle_addr_q(port) (port)
++
++# define ioswabb(a, x) (x)
++# define __mem_ioswabb(a, x) (x)
++# define ioswabw(a, x) (x)
++# define __mem_ioswabw(a, x) cpu_to_le16(x)
++# define ioswabl(a, x) (x)
++# define __mem_ioswabl(a, x) cpu_to_le32(x)
++# define ioswabq(a, x) (x)
++# define __mem_ioswabq(a, x) cpu_to_le64(x)
++
++#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */
+--- a/arch/mips/pci/pci-ar71xx.c
++++ b/arch/mips/pci/pci-ar71xx.c
+@@ -68,6 +68,45 @@ static const u32 ar71xx_pci_read_mask[8]
+ 0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0
+ };
+
++static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port);
++static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port);
++
++static inline bool ar71xx_is_pci_addr(unsigned long port)
++{
++ unsigned long phys = CPHYSADDR(port);
++
++ return (phys >= AR71XX_PCI_MEM_BASE &&
++ phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE);
++}
++
++static unsigned long ar71xx_pci_swizzle_b(unsigned long port)
++{
++ return ar71xx_is_pci_addr(port) ? port ^ 3 : port;
++}
++
++static unsigned long ar71xx_pci_swizzle_w(unsigned long port)
++{
++ return ar71xx_is_pci_addr(port) ? port ^ 2 : port;
++}
++
++unsigned long ath79_pci_swizzle_b(unsigned long port)
++{
++ if (__ath79_pci_swizzle_b)
++ return __ath79_pci_swizzle_b(port);
++
++ return port;
++}
++EXPORT_SYMBOL(ath79_pci_swizzle_b);
++
++unsigned long ath79_pci_swizzle_w(unsigned long port)
++{
++ if (__ath79_pci_swizzle_w)
++ return __ath79_pci_swizzle_w(port);
++
++ return port;
++}
++EXPORT_SYMBOL(ath79_pci_swizzle_w);
++
+ static inline u32 ar71xx_pci_get_ble(int where, int size, int local)
+ {
+ u32 t;
+@@ -276,6 +315,9 @@ static int ar71xx_pci_probe(struct platf
+
+ register_pci_controller(&apc->pci_ctrl);
+
++ __ath79_pci_swizzle_b = ar71xx_pci_swizzle_b;
++ __ath79_pci_swizzle_w = ar71xx_pci_swizzle_w;
++
+ return 0;
+ }
+
diff --git a/target/linux/ath79/patches-5.10/900-mdio_bitbang_ignore_ta_value.patch b/target/linux/ath79/patches-5.10/900-mdio_bitbang_ignore_ta_value.patch
new file mode 100644
index 0000000000..928f241abd
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/900-mdio_bitbang_ignore_ta_value.patch
@@ -0,0 +1,32 @@
+--- a/drivers/net/mdio/mdio-bitbang.c
++++ b/drivers/net/mdio/mdio-bitbang.c
+@@ -152,7 +152,7 @@ static int mdiobb_cmd_addr(struct mdiobb
+ static int mdiobb_read(struct mii_bus *bus, int phy, int reg)
+ {
+ struct mdiobb_ctrl *ctrl = bus->priv;
+- int ret, i;
++ int ret;
+
+ if (reg & MII_ADDR_C45) {
+ reg = mdiobb_cmd_addr(ctrl, phy, reg);
+@@ -162,19 +162,7 @@ static int mdiobb_read(struct mii_bus *b
+
+ ctrl->ops->set_mdio_dir(ctrl, 0);
+
+- /* check the turnaround bit: the PHY should be driving it to zero, if this
+- * PHY is listed in phy_ignore_ta_mask as having broken TA, skip that
+- */
+- if (mdiobb_get_bit(ctrl) != 0 &&
+- !(bus->phy_ignore_ta_mask & (1 << phy))) {
+- /* PHY didn't drive TA low -- flush any bits it
+- * may be trying to send.
+- */
+- for (i = 0; i < 32; i++)
+- mdiobb_get_bit(ctrl);
+-
+- return 0xffff;
+- }
++ mdiobb_get_bit(ctrl);
+
+ ret = mdiobb_get_num(ctrl, 16);
+ mdiobb_get_bit(ctrl);
diff --git a/target/linux/ath79/patches-5.10/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch b/target/linux/ath79/patches-5.10/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch
new file mode 100644
index 0000000000..5b3260eecb
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch
@@ -0,0 +1,61 @@
+From 66e584435ac0de6e0abeb6d7166fe4fe25d6bb73 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 16 Jun 2015 13:15:08 +0200
+Subject: [PATCH] phy/mdio-bitbang: prevent rescheduling during command
+
+It seems some phys have some maximum timings for accessing the MDIO line,
+resulting in bit errors under cpu stress. Prevent this from happening by
+disabling interrupts when sending commands.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/net/mdio/mdio-bitbang.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+--- a/drivers/net/mdio/mdio-bitbang.c
++++ b/drivers/net/mdio/mdio-bitbang.c
+@@ -14,6 +14,7 @@
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ */
+
++#include <linux/irqflags.h>
+ #include <linux/module.h>
+ #include <linux/mdio-bitbang.h>
+ #include <linux/types.h>
+@@ -153,7 +154,9 @@ static int mdiobb_read(struct mii_bus *b
+ {
+ struct mdiobb_ctrl *ctrl = bus->priv;
+ int ret;
++ unsigned long flags;
+
++ local_irq_save(flags);
+ if (reg & MII_ADDR_C45) {
+ reg = mdiobb_cmd_addr(ctrl, phy, reg);
+ mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg);
+@@ -166,13 +169,17 @@ static int mdiobb_read(struct mii_bus *b
+
+ ret = mdiobb_get_num(ctrl, 16);
+ mdiobb_get_bit(ctrl);
++ local_irq_restore(flags);
++
+ return ret;
+ }
+
+ static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
+ {
+ struct mdiobb_ctrl *ctrl = bus->priv;
++ unsigned long flags;
+
++ local_irq_save(flags);
+ if (reg & MII_ADDR_C45) {
+ reg = mdiobb_cmd_addr(ctrl, phy, reg);
+ mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg);
+@@ -187,6 +194,8 @@ static int mdiobb_write(struct mii_bus *
+
+ ctrl->ops->set_mdio_dir(ctrl, 0);
+ mdiobb_get_bit(ctrl);
++ local_irq_restore(flags);
++
+ return 0;
+ }
+
diff --git a/target/linux/ath79/patches-5.10/910-unaligned_access_hacks.patch b/target/linux/ath79/patches-5.10/910-unaligned_access_hacks.patch
new file mode 100644
index 0000000000..2440fbbb73
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/910-unaligned_access_hacks.patch
@@ -0,0 +1,869 @@
+--- a/arch/mips/include/asm/checksum.h
++++ b/arch/mips/include/asm/checksum.h
+@@ -134,26 +134,30 @@ static inline __sum16 ip_fast_csum(const
+ const unsigned int *stop = word + ihl;
+ unsigned int csum;
+ int carry;
++ unsigned int w;
+
+- csum = word[0];
+- csum += word[1];
+- carry = (csum < word[1]);
++ csum = net_hdr_word(word++);
++
++ w = net_hdr_word(word++);
++ csum += w;
++ carry = (csum < w);
+ csum += carry;
+
+- csum += word[2];
+- carry = (csum < word[2]);
++ w = net_hdr_word(word++);
++ csum += w;
++ carry = (csum < w);
+ csum += carry;
+
+- csum += word[3];
+- carry = (csum < word[3]);
++ w = net_hdr_word(word++);
++ csum += w;
++ carry = (csum < w);
+ csum += carry;
+
+- word += 4;
+ do {
+- csum += *word;
+- carry = (csum < *word);
++ w = net_hdr_word(word++);
++ csum += w;
++ carry = (csum < w);
+ csum += carry;
+- word++;
+ } while (word != stop);
+
+ return csum_fold(csum);
+@@ -214,73 +218,6 @@ static inline __sum16 ip_compute_csum(co
+ return csum_fold(csum_partial(buff, len, 0));
+ }
+
+-#define _HAVE_ARCH_IPV6_CSUM
+-static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+- const struct in6_addr *daddr,
+- __u32 len, __u8 proto,
+- __wsum sum)
+-{
+- __wsum tmp;
+-
+- __asm__(
+- " .set push # csum_ipv6_magic\n"
+- " .set noreorder \n"
+- " .set noat \n"
+- " addu %0, %5 # proto (long in network byte order)\n"
+- " sltu $1, %0, %5 \n"
+- " addu %0, $1 \n"
+-
+- " addu %0, %6 # csum\n"
+- " sltu $1, %0, %6 \n"
+- " lw %1, 0(%2) # four words source address\n"
+- " addu %0, $1 \n"
+- " addu %0, %1 \n"
+- " sltu $1, %0, %1 \n"
+-
+- " lw %1, 4(%2) \n"
+- " addu %0, $1 \n"
+- " addu %0, %1 \n"
+- " sltu $1, %0, %1 \n"
+-
+- " lw %1, 8(%2) \n"
+- " addu %0, $1 \n"
+- " addu %0, %1 \n"
+- " sltu $1, %0, %1 \n"
+-
+- " lw %1, 12(%2) \n"
+- " addu %0, $1 \n"
+- " addu %0, %1 \n"
+- " sltu $1, %0, %1 \n"
+-
+- " lw %1, 0(%3) \n"
+- " addu %0, $1 \n"
+- " addu %0, %1 \n"
+- " sltu $1, %0, %1 \n"
+-
+- " lw %1, 4(%3) \n"
+- " addu %0, $1 \n"
+- " addu %0, %1 \n"
+- " sltu $1, %0, %1 \n"
+-
+- " lw %1, 8(%3) \n"
+- " addu %0, $1 \n"
+- " addu %0, %1 \n"
+- " sltu $1, %0, %1 \n"
+-
+- " lw %1, 12(%3) \n"
+- " addu %0, $1 \n"
+- " addu %0, %1 \n"
+- " sltu $1, %0, %1 \n"
+-
+- " addu %0, $1 # Add final carry\n"
+- " .set pop"
+- : "=&r" (sum), "=&r" (tmp)
+- : "r" (saddr), "r" (daddr),
+- "0" (htonl(len)), "r" (htonl(proto)), "r" (sum));
+-
+- return csum_fold(sum);
+-}
+-
+ #include <asm-generic/checksum.h>
+ #endif /* CONFIG_GENERIC_CSUM */
+
+--- a/include/uapi/linux/ip.h
++++ b/include/uapi/linux/ip.h
+@@ -103,7 +103,7 @@ struct iphdr {
+ __be32 saddr;
+ __be32 daddr;
+ /*The options start here. */
+-};
++} __attribute__((packed, aligned(2)));
+
+
+ struct ip_auth_hdr {
+--- a/include/uapi/linux/ipv6.h
++++ b/include/uapi/linux/ipv6.h
+@@ -131,7 +131,7 @@ struct ipv6hdr {
+
+ struct in6_addr saddr;
+ struct in6_addr daddr;
+-};
++} __attribute__((packed, aligned(2)));
+
+
+ /* index values for the variables in ipv6_devconf */
+--- a/include/uapi/linux/tcp.h
++++ b/include/uapi/linux/tcp.h
+@@ -55,7 +55,7 @@ struct tcphdr {
+ __be16 window;
+ __sum16 check;
+ __be16 urg_ptr;
+-};
++} __attribute__((packed, aligned(2)));
+
+ /*
+ * The union cast uses a gcc extension to avoid aliasing problems
+@@ -65,7 +65,7 @@ struct tcphdr {
+ union tcp_word_hdr {
+ struct tcphdr hdr;
+ __be32 words[5];
+-};
++} __attribute__((packed, aligned(2)));
+
+ #define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3])
+
+--- a/include/uapi/linux/udp.h
++++ b/include/uapi/linux/udp.h
+@@ -25,7 +25,7 @@ struct udphdr {
+ __be16 dest;
+ __be16 len;
+ __sum16 check;
+-};
++} __attribute__((packed, aligned(2)));
+
+ /* UDP socket options */
+ #define UDP_CORK 1 /* Never send partially complete segments */
+--- a/net/netfilter/nf_conntrack_core.c
++++ b/net/netfilter/nf_conntrack_core.c
+@@ -271,8 +271,8 @@ nf_ct_get_tuple(const struct sk_buff *sk
+
+ switch (l3num) {
+ case NFPROTO_IPV4:
+- tuple->src.u3.ip = ap[0];
+- tuple->dst.u3.ip = ap[1];
++ tuple->src.u3.ip = net_hdr_word(ap++);
++ tuple->dst.u3.ip = net_hdr_word(ap);
+ break;
+ case NFPROTO_IPV6:
+ memcpy(tuple->src.u3.ip6, ap, sizeof(tuple->src.u3.ip6));
+--- a/include/uapi/linux/icmp.h
++++ b/include/uapi/linux/icmp.h
+@@ -82,7 +82,7 @@ struct icmphdr {
+ } frag;
+ __u8 reserved[4];
+ } un;
+-};
++} __attribute__((packed, aligned(2)));
+
+
+ /*
+--- a/include/uapi/linux/in6.h
++++ b/include/uapi/linux/in6.h
+@@ -43,7 +43,7 @@ struct in6_addr {
+ #define s6_addr16 in6_u.u6_addr16
+ #define s6_addr32 in6_u.u6_addr32
+ #endif
+-};
++} __attribute__((packed, aligned(2)));
+ #endif /* __UAPI_DEF_IN6_ADDR */
+
+ #if __UAPI_DEF_SOCKADDR_IN6
+--- a/net/ipv6/tcp_ipv6.c
++++ b/net/ipv6/tcp_ipv6.c
+@@ -35,6 +35,7 @@
+ #include <linux/ipsec.h>
+ #include <linux/times.h>
+ #include <linux/slab.h>
++#include <asm/unaligned.h>
+ #include <linux/uaccess.h>
+ #include <linux/ipv6.h>
+ #include <linux/icmpv6.h>
+@@ -849,10 +850,10 @@ static void tcp_v6_send_response(const s
+ topt = (__be32 *)(t1 + 1);
+
+ if (tsecr) {
+- *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
+- (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP);
+- *topt++ = htonl(tsval);
+- *topt++ = htonl(tsecr);
++ put_unaligned_be32((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
++ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP, topt++);
++ put_unaligned_be32(tsval, topt++);
++ put_unaligned_be32(tsecr, topt++);
+ }
+
+ #ifdef CONFIG_TCP_MD5SIG
+--- a/include/linux/ipv6.h
++++ b/include/linux/ipv6.h
+@@ -6,6 +6,7 @@
+
+ #define ipv6_optlen(p) (((p)->hdrlen+1) << 3)
+ #define ipv6_authlen(p) (((p)->hdrlen+2) << 2)
++
+ /*
+ * This structure contains configuration options per IPv6 link.
+ */
+--- a/net/ipv6/datagram.c
++++ b/net/ipv6/datagram.c
+@@ -476,7 +476,7 @@ int ipv6_recv_error(struct sock *sk, str
+ ipv6_iface_scope_id(&sin->sin6_addr,
+ IP6CB(skb)->iif);
+ } else {
+- ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset),
++ ipv6_addr_set_v4mapped(net_hdr_word(nh + serr->addr_offset),
+ &sin->sin6_addr);
+ sin->sin6_scope_id = 0;
+ }
+@@ -830,12 +830,12 @@ int ip6_datagram_send_ctl(struct net *ne
+ }
+
+ if (fl6->flowlabel&IPV6_FLOWINFO_MASK) {
+- if ((fl6->flowlabel^*(__be32 *)CMSG_DATA(cmsg))&~IPV6_FLOWINFO_MASK) {
++ if ((fl6->flowlabel^net_hdr_word(CMSG_DATA(cmsg)))&~IPV6_FLOWINFO_MASK) {
+ err = -EINVAL;
+ goto exit_f;
+ }
+ }
+- fl6->flowlabel = IPV6_FLOWINFO_MASK & *(__be32 *)CMSG_DATA(cmsg);
++ fl6->flowlabel = IPV6_FLOWINFO_MASK & net_hdr_word(CMSG_DATA(cmsg));
+ break;
+
+ case IPV6_2292HOPOPTS:
+--- a/net/ipv6/exthdrs.c
++++ b/net/ipv6/exthdrs.c
+@@ -752,7 +752,7 @@ static bool ipv6_hop_jumbo(struct sk_buf
+ goto drop;
+ }
+
+- pkt_len = ntohl(*(__be32 *)(nh + optoff + 2));
++ pkt_len = ntohl(net_hdr_word(nh + optoff + 2));
+ if (pkt_len <= IPV6_MAXPLEN) {
+ __IP6_INC_STATS(net, idev, IPSTATS_MIB_INHDRERRORS);
+ icmpv6_param_prob(skb, ICMPV6_HDR_FIELD, optoff+2);
+--- a/include/linux/types.h
++++ b/include/linux/types.h
+@@ -225,5 +225,11 @@ struct callback_head {
+ typedef void (*rcu_callback_t)(struct rcu_head *head);
+ typedef void (*call_rcu_func_t)(struct rcu_head *head, rcu_callback_t func);
+
++struct net_hdr_word {
++ u32 words[1];
++} __attribute__((packed, aligned(2)));
++
++#define net_hdr_word(_p) (((struct net_hdr_word *) (_p))->words[0])
++
+ #endif /* __ASSEMBLY__ */
+ #endif /* _LINUX_TYPES_H */
+--- a/net/ipv4/af_inet.c
++++ b/net/ipv4/af_inet.c
+@@ -1441,8 +1441,8 @@ struct sk_buff *inet_gro_receive(struct
+ if (unlikely(ip_fast_csum((u8 *)iph, 5)))
+ goto out_unlock;
+
+- id = ntohl(*(__be32 *)&iph->id);
+- flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id & ~IP_DF));
++ id = ntohl(net_hdr_word(&iph->id));
++ flush = (u16)((ntohl(net_hdr_word(iph)) ^ skb_gro_len(skb)) | (id & ~IP_DF));
+ id >>= 16;
+
+ list_for_each_entry(p, head, list) {
+--- a/net/ipv4/tcp_output.c
++++ b/net/ipv4/tcp_output.c
+@@ -460,48 +460,53 @@ static void tcp_options_write(__be32 *pt
+ u16 options = opts->options; /* mungable copy */
+
+ if (unlikely(OPTION_MD5 & options)) {
+- *ptr++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
+- (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
++ net_hdr_word(ptr++) =
++ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
++ (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
+ /* overload cookie hash location */
+ opts->hash_location = (__u8 *)ptr;
+ ptr += 4;
+ }
+
+ if (unlikely(opts->mss)) {
+- *ptr++ = htonl((TCPOPT_MSS << 24) |
+- (TCPOLEN_MSS << 16) |
+- opts->mss);
++ net_hdr_word(ptr++) =
++ htonl((TCPOPT_MSS << 24) | (TCPOLEN_MSS << 16) |
++ opts->mss);
+ }
+
+ if (likely(OPTION_TS & options)) {
+ if (unlikely(OPTION_SACK_ADVERTISE & options)) {
+- *ptr++ = htonl((TCPOPT_SACK_PERM << 24) |
+- (TCPOLEN_SACK_PERM << 16) |
+- (TCPOPT_TIMESTAMP << 8) |
+- TCPOLEN_TIMESTAMP);
++ net_hdr_word(ptr++) =
++ htonl((TCPOPT_SACK_PERM << 24) |
++ (TCPOLEN_SACK_PERM << 16) |
++ (TCPOPT_TIMESTAMP << 8) |
++ TCPOLEN_TIMESTAMP);
+ options &= ~OPTION_SACK_ADVERTISE;
+ } else {
+- *ptr++ = htonl((TCPOPT_NOP << 24) |
+- (TCPOPT_NOP << 16) |
+- (TCPOPT_TIMESTAMP << 8) |
+- TCPOLEN_TIMESTAMP);
++ net_hdr_word(ptr++) =
++ htonl((TCPOPT_NOP << 24) |
++ (TCPOPT_NOP << 16) |
++ (TCPOPT_TIMESTAMP << 8) |
++ TCPOLEN_TIMESTAMP);
+ }
+- *ptr++ = htonl(opts->tsval);
+- *ptr++ = htonl(opts->tsecr);
++ net_hdr_word(ptr++) = htonl(opts->tsval);
++ net_hdr_word(ptr++) = htonl(opts->tsecr);
+ }
+
+ if (unlikely(OPTION_SACK_ADVERTISE & options)) {
+- *ptr++ = htonl((TCPOPT_NOP << 24) |
+- (TCPOPT_NOP << 16) |
+- (TCPOPT_SACK_PERM << 8) |
+- TCPOLEN_SACK_PERM);
++ net_hdr_word(ptr++) =
++ htonl((TCPOPT_NOP << 24) |
++ (TCPOPT_NOP << 16) |
++ (TCPOPT_SACK_PERM << 8) |
++ TCPOLEN_SACK_PERM);
+ }
+
+ if (unlikely(OPTION_WSCALE & options)) {
+- *ptr++ = htonl((TCPOPT_NOP << 24) |
+- (TCPOPT_WINDOW << 16) |
+- (TCPOLEN_WINDOW << 8) |
+- opts->ws);
++ net_hdr_word(ptr++) =
++ htonl((TCPOPT_NOP << 24) |
++ (TCPOPT_WINDOW << 16) |
++ (TCPOLEN_WINDOW << 8) |
++ opts->ws);
+ }
+
+ if (unlikely(opts->num_sack_blocks)) {
+@@ -509,16 +514,17 @@ static void tcp_options_write(__be32 *pt
+ tp->duplicate_sack : tp->selective_acks;
+ int this_sack;
+
+- *ptr++ = htonl((TCPOPT_NOP << 24) |
+- (TCPOPT_NOP << 16) |
+- (TCPOPT_SACK << 8) |
+- (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
++ net_hdr_word(ptr++) =
++ htonl((TCPOPT_NOP << 24) |
++ (TCPOPT_NOP << 16) |
++ (TCPOPT_SACK << 8) |
++ (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
+ TCPOLEN_SACK_PERBLOCK)));
+
+ for (this_sack = 0; this_sack < opts->num_sack_blocks;
+ ++this_sack) {
+- *ptr++ = htonl(sp[this_sack].start_seq);
+- *ptr++ = htonl(sp[this_sack].end_seq);
++ net_hdr_word(ptr++) = htonl(sp[this_sack].start_seq);
++ net_hdr_word(ptr++) = htonl(sp[this_sack].end_seq);
+ }
+
+ tp->rx_opt.dsack = 0;
+@@ -531,13 +537,14 @@ static void tcp_options_write(__be32 *pt
+
+ if (foc->exp) {
+ len = TCPOLEN_EXP_FASTOPEN_BASE + foc->len;
+- *ptr = htonl((TCPOPT_EXP << 24) | (len << 16) |
++ net_hdr_word(ptr) =
++ htonl((TCPOPT_EXP << 24) | (len << 16) |
+ TCPOPT_FASTOPEN_MAGIC);
+ p += TCPOLEN_EXP_FASTOPEN_BASE;
+ } else {
+ len = TCPOLEN_FASTOPEN_BASE + foc->len;
+- *p++ = TCPOPT_FASTOPEN;
+- *p++ = len;
++ net_hdr_word(p++) = TCPOPT_FASTOPEN;
++ net_hdr_word(p++) = len;
+ }
+
+ memcpy(p, foc->val, foc->len);
+--- a/include/uapi/linux/igmp.h
++++ b/include/uapi/linux/igmp.h
+@@ -33,7 +33,7 @@ struct igmphdr {
+ __u8 code; /* For newer IGMP */
+ __sum16 csum;
+ __be32 group;
+-};
++} __attribute__((packed, aligned(2)));
+
+ /* V3 group record types [grec_type] */
+ #define IGMPV3_MODE_IS_INCLUDE 1
+@@ -49,7 +49,7 @@ struct igmpv3_grec {
+ __be16 grec_nsrcs;
+ __be32 grec_mca;
+ __be32 grec_src[0];
+-};
++} __attribute__((packed, aligned(2)));
+
+ struct igmpv3_report {
+ __u8 type;
+@@ -58,7 +58,7 @@ struct igmpv3_report {
+ __be16 resv2;
+ __be16 ngrec;
+ struct igmpv3_grec grec[0];
+-};
++} __attribute__((packed, aligned(2)));
+
+ struct igmpv3_query {
+ __u8 type;
+@@ -79,7 +79,7 @@ struct igmpv3_query {
+ __u8 qqic;
+ __be16 nsrcs;
+ __be32 srcs[0];
+-};
++} __attribute__((packed, aligned(2)));
+
+ #define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */
+ #define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */
+--- a/net/core/flow_dissector.c
++++ b/net/core/flow_dissector.c
+@@ -212,7 +212,7 @@ __be32 __skb_flow_get_ports(const struct
+ ports = __skb_header_pointer(skb, thoff + poff,
+ sizeof(_ports), data, hlen, &_ports);
+ if (ports)
+- return *ports;
++ return (__be32)net_hdr_word(ports);
+ }
+
+ return 0;
+--- a/include/uapi/linux/icmpv6.h
++++ b/include/uapi/linux/icmpv6.h
+@@ -77,7 +77,7 @@ struct icmp6hdr {
+ #define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other
+ #define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime
+ #define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref
+-};
++} __attribute__((packed, aligned(2)));
+
+
+ #define ICMPV6_ROUTER_PREF_LOW 0x3
+--- a/include/net/ndisc.h
++++ b/include/net/ndisc.h
+@@ -92,7 +92,7 @@ struct ra_msg {
+ struct icmp6hdr icmph;
+ __be32 reachable_time;
+ __be32 retrans_timer;
+-};
++} __attribute__((packed, aligned(2)));
+
+ struct rd_msg {
+ struct icmp6hdr icmph;
+@@ -371,10 +371,10 @@ static inline u32 ndisc_hashfn(const voi
+ {
+ const u32 *p32 = pkey;
+
+- return (((p32[0] ^ hash32_ptr(dev)) * hash_rnd[0]) +
+- (p32[1] * hash_rnd[1]) +
+- (p32[2] * hash_rnd[2]) +
+- (p32[3] * hash_rnd[3]));
++ return (((net_hdr_word(&p32[0]) ^ hash32_ptr(dev)) * hash_rnd[0]) +
++ (net_hdr_word(&p32[1]) * hash_rnd[1]) +
++ (net_hdr_word(&p32[2]) * hash_rnd[2]) +
++ (net_hdr_word(&p32[3]) * hash_rnd[3]));
+ }
+
+ static inline struct neighbour *__ipv6_neigh_lookup_noref(struct net_device *dev, const void *pkey)
+--- a/net/sched/cls_u32.c
++++ b/net/sched/cls_u32.c
+@@ -155,7 +155,7 @@ next_knode:
+ data = skb_header_pointer(skb, toff, 4, &hdata);
+ if (!data)
+ goto out;
+- if ((*data ^ key->val) & key->mask) {
++ if ((net_hdr_word(data) ^ key->val) & key->mask) {
+ n = rcu_dereference_bh(n->next);
+ goto next_knode;
+ }
+@@ -206,8 +206,8 @@ check_terminal:
+ &hdata);
+ if (!data)
+ goto out;
+- sel = ht->divisor & u32_hash_fold(*data, &n->sel,
+- n->fshift);
++ sel = ht->divisor & u32_hash_fold(net_hdr_word(data),
++ &n->sel, n->fshift);
+ }
+ if (!(n->sel.flags & (TC_U32_VAROFFSET | TC_U32_OFFSET | TC_U32_EAT)))
+ goto next_ht;
+--- a/net/ipv6/ip6_offload.c
++++ b/net/ipv6/ip6_offload.c
+@@ -240,7 +240,7 @@ INDIRECT_CALLABLE_SCOPE struct sk_buff *
+ continue;
+
+ iph2 = (struct ipv6hdr *)(p->data + off);
+- first_word = *(__be32 *)iph ^ *(__be32 *)iph2;
++ first_word = net_hdr_word(iph) ^ net_hdr_word(iph2);
+
+ /* All fields must match except length and Traffic Class.
+ * XXX skbs on the gro_list have all been parsed and pulled
+--- a/include/net/addrconf.h
++++ b/include/net/addrconf.h
+@@ -47,7 +47,7 @@ struct prefix_info {
+ __be32 reserved2;
+
+ struct in6_addr prefix;
+-};
++} __attribute__((packed, aligned(2)));
+
+ #include <linux/ipv6.h>
+ #include <linux/netdevice.h>
+--- a/include/net/inet_ecn.h
++++ b/include/net/inet_ecn.h
+@@ -140,9 +140,9 @@ static inline int IP6_ECN_set_ce(struct
+ if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph)))
+ return 0;
+
+- from = *(__be32 *)iph;
++ from = net_hdr_word(iph);
+ to = from | htonl(INET_ECN_CE << 20);
+- *(__be32 *)iph = to;
++ net_hdr_word(iph) = to;
+ if (skb->ip_summed == CHECKSUM_COMPLETE)
+ skb->csum = csum_add(csum_sub(skb->csum, (__force __wsum)from),
+ (__force __wsum)to);
+--- a/include/net/ipv6.h
++++ b/include/net/ipv6.h
+@@ -146,7 +146,7 @@ struct frag_hdr {
+ __u8 reserved;
+ __be16 frag_off;
+ __be32 identification;
+-};
++} __attribute__((packed, aligned(2)));
+
+ #define IP6_MF 0x0001
+ #define IP6_OFFSET 0xFFF8
+@@ -557,8 +557,8 @@ static inline void __ipv6_addr_set_half(
+ }
+ #endif
+ #endif
+- addr[0] = wh;
+- addr[1] = wl;
++ net_hdr_word(&addr[0]) = wh;
++ net_hdr_word(&addr[1]) = wl;
+ }
+
+ static inline void ipv6_addr_set(struct in6_addr *addr,
+@@ -617,6 +617,8 @@ static inline bool ipv6_prefix_equal(con
+ const __be32 *a1 = addr1->s6_addr32;
+ const __be32 *a2 = addr2->s6_addr32;
+ unsigned int pdw, pbi;
++ /* Used for last <32-bit fraction of prefix */
++ u32 pbia1, pbia2;
+
+ /* check complete u32 in prefix */
+ pdw = prefixlen >> 5;
+@@ -625,7 +627,9 @@ static inline bool ipv6_prefix_equal(con
+
+ /* check incomplete u32 in prefix */
+ pbi = prefixlen & 0x1f;
+- if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi))))
++ pbia1 = net_hdr_word(&a1[pdw]);
++ pbia2 = net_hdr_word(&a2[pdw]);
++ if (pbi && ((pbia1 ^ pbia2) & htonl((0xffffffff) << (32 - pbi))))
+ return false;
+
+ return true;
+@@ -741,13 +745,13 @@ static inline void ipv6_addr_set_v4mappe
+ */
+ static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen)
+ {
+- const __be32 *a1 = token1, *a2 = token2;
++ const struct in6_addr *a1 = token1, *a2 = token2;
+ int i;
+
+ addrlen >>= 2;
+
+ for (i = 0; i < addrlen; i++) {
+- __be32 xb = a1[i] ^ a2[i];
++ __be32 xb = a1->s6_addr32[i] ^ a2->s6_addr32[i];
+ if (xb)
+ return i * 32 + 31 - __fls(ntohl(xb));
+ }
+@@ -934,17 +938,18 @@ static inline int ip6_multipath_hash_pol
+ static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass,
+ __be32 flowlabel)
+ {
+- *(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | flowlabel;
++ net_hdr_word((__be32 *)hdr) =
++ htonl(0x60000000 | (tclass << 20)) | flowlabel;
+ }
+
+ static inline __be32 ip6_flowinfo(const struct ipv6hdr *hdr)
+ {
+- return *(__be32 *)hdr & IPV6_FLOWINFO_MASK;
++ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWINFO_MASK;
+ }
+
+ static inline __be32 ip6_flowlabel(const struct ipv6hdr *hdr)
+ {
+- return *(__be32 *)hdr & IPV6_FLOWLABEL_MASK;
++ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWLABEL_MASK;
+ }
+
+ static inline u8 ip6_tclass(__be32 flowinfo)
+--- a/include/net/secure_seq.h
++++ b/include/net/secure_seq.h
+@@ -3,6 +3,7 @@
+ #define _NET_SECURE_SEQ
+
+ #include <linux/types.h>
++#include <linux/in6.h>
+
+ u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport);
+ u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
+--- a/include/uapi/linux/in.h
++++ b/include/uapi/linux/in.h
+@@ -84,7 +84,7 @@ enum {
+ /* Internet address. */
+ struct in_addr {
+ __be32 s_addr;
+-};
++} __attribute__((packed, aligned(2)));
+ #endif
+
+ #define IP_TOS 1
+--- a/net/ipv6/ip6_fib.c
++++ b/net/ipv6/ip6_fib.c
+@@ -140,7 +140,7 @@ static __be32 addr_bit_set(const void *t
+ * See include/asm-generic/bitops/le.h.
+ */
+ return (__force __be32)(1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)) &
+- addr[fn_bit >> 5];
++ net_hdr_word(&addr[fn_bit >> 5]);
+ }
+
+ struct fib6_info *fib6_info_alloc(gfp_t gfp_flags, bool with_fib6_nh)
+--- a/net/netfilter/nf_conntrack_proto_tcp.c
++++ b/net/netfilter/nf_conntrack_proto_tcp.c
+@@ -415,7 +415,7 @@ static void tcp_sack(const struct sk_buf
+
+ /* Fast path for timestamp-only option */
+ if (length == TCPOLEN_TSTAMP_ALIGNED
+- && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24)
++ && net_hdr_word(ptr) == htonl((TCPOPT_NOP << 24)
+ | (TCPOPT_NOP << 16)
+ | (TCPOPT_TIMESTAMP << 8)
+ | TCPOLEN_TIMESTAMP))
+--- a/net/xfrm/xfrm_input.c
++++ b/net/xfrm/xfrm_input.c
+@@ -162,8 +162,8 @@ int xfrm_parse_spi(struct sk_buff *skb,
+ if (!pskb_may_pull(skb, hlen))
+ return -EINVAL;
+
+- *spi = *(__be32 *)(skb_transport_header(skb) + offset);
+- *seq = *(__be32 *)(skb_transport_header(skb) + offset_seq);
++ *spi = net_hdr_word(skb_transport_header(skb) + offset);
++ *seq = net_hdr_word(skb_transport_header(skb) + offset_seq);
+ return 0;
+ }
+ EXPORT_SYMBOL(xfrm_parse_spi);
+--- a/net/ipv4/tcp_input.c
++++ b/net/ipv4/tcp_input.c
+@@ -3976,14 +3976,16 @@ static bool tcp_parse_aligned_timestamp(
+ {
+ const __be32 *ptr = (const __be32 *)(th + 1);
+
+- if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16)
+- | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
++ if (net_hdr_word(ptr) ==
++ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
++ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
+ tp->rx_opt.saw_tstamp = 1;
+ ++ptr;
+- tp->rx_opt.rcv_tsval = ntohl(*ptr);
++ tp->rx_opt.rcv_tsval = get_unaligned_be32(ptr);
+ ++ptr;
+- if (*ptr)
+- tp->rx_opt.rcv_tsecr = ntohl(*ptr) - tp->tsoffset;
++ if (net_hdr_word(ptr))
++ tp->rx_opt.rcv_tsecr = get_unaligned_be32(ptr) -
++ tp->tsoffset;
+ else
+ tp->rx_opt.rcv_tsecr = 0;
+ return true;
+--- a/include/uapi/linux/if_pppox.h
++++ b/include/uapi/linux/if_pppox.h
+@@ -51,6 +51,7 @@ struct pppoe_addr {
+ */
+ struct pptp_addr {
+ __u16 call_id;
++ __u16 pad;
+ struct in_addr sin_addr;
+ };
+
+--- a/net/ipv6/netfilter/nf_log_ipv6.c
++++ b/net/ipv6/netfilter/nf_log_ipv6.c
+@@ -63,9 +63,9 @@ static void dump_ipv6_packet(struct net
+ /* Max length: 44 "LEN=65535 TC=255 HOPLIMIT=255 FLOWLBL=FFFFF " */
+ nf_log_buf_add(m, "LEN=%zu TC=%u HOPLIMIT=%u FLOWLBL=%u ",
+ ntohs(ih->payload_len) + sizeof(struct ipv6hdr),
+- (ntohl(*(__be32 *)ih) & 0x0ff00000) >> 20,
++ (ntohl(net_hdr_word(ih)) & 0x0ff00000) >> 20,
+ ih->hop_limit,
+- (ntohl(*(__be32 *)ih) & 0x000fffff));
++ (ntohl(net_hdr_word(ih)) & 0x000fffff));
+
+ fragment = 0;
+ ptr = ip6hoff + sizeof(struct ipv6hdr);
+--- a/include/net/neighbour.h
++++ b/include/net/neighbour.h
+@@ -274,8 +274,10 @@ static inline bool neigh_key_eq128(const
+ const u32 *n32 = (const u32 *)n->primary_key;
+ const u32 *p32 = pkey;
+
+- return ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) |
+- (n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0;
++ return ((n32[0] ^ net_hdr_word(&p32[0])) |
++ (n32[1] ^ net_hdr_word(&p32[1])) |
++ (n32[2] ^ net_hdr_word(&p32[2])) |
++ (n32[3] ^ net_hdr_word(&p32[3]))) == 0;
+ }
+
+ static inline struct neighbour *___neigh_lookup_noref(
+--- a/include/uapi/linux/netfilter_arp/arp_tables.h
++++ b/include/uapi/linux/netfilter_arp/arp_tables.h
+@@ -70,7 +70,7 @@ struct arpt_arp {
+ __u8 flags;
+ /* Inverse flags */
+ __u16 invflags;
+-};
++} __attribute__((aligned(4)));
+
+ /* Values for "flag" field in struct arpt_ip (general arp structure).
+ * No flags defined yet.
+--- a/net/core/utils.c
++++ b/net/core/utils.c
+@@ -460,8 +460,14 @@ void inet_proto_csum_replace16(__sum16 *
+ bool pseudohdr)
+ {
+ __be32 diff[] = {
+- ~from[0], ~from[1], ~from[2], ~from[3],
+- to[0], to[1], to[2], to[3],
++ ~net_hdr_word(&from[0]),
++ ~net_hdr_word(&from[1]),
++ ~net_hdr_word(&from[2]),
++ ~net_hdr_word(&from[3]),
++ net_hdr_word(&to[0]),
++ net_hdr_word(&to[1]),
++ net_hdr_word(&to[2]),
++ net_hdr_word(&to[3]),
+ };
+ if (skb->ip_summed != CHECKSUM_PARTIAL) {
+ *sum = csum_fold(csum_partial(diff, sizeof(diff),
+--- a/include/linux/etherdevice.h
++++ b/include/linux/etherdevice.h
+@@ -489,7 +489,7 @@ static inline bool is_etherdev_addr(cons
+ * @b: Pointer to Ethernet header
+ *
+ * Compare two Ethernet headers, returns 0 if equal.
+- * This assumes that the network header (i.e., IP header) is 4-byte
++ * This assumes that the network header (i.e., IP header) is 2-byte
+ * aligned OR the platform can handle unaligned access. This is the
+ * case for all packets coming into netif_receive_skb or similar
+ * entry points.
+@@ -512,11 +512,12 @@ static inline unsigned long compare_ethe
+ fold |= *(unsigned long *)(a + 6) ^ *(unsigned long *)(b + 6);
+ return fold;
+ #else
+- u32 *a32 = (u32 *)((u8 *)a + 2);
+- u32 *b32 = (u32 *)((u8 *)b + 2);
++ const u16 *a16 = a;
++ const u16 *b16 = b;
+
+- return (*(u16 *)a ^ *(u16 *)b) | (a32[0] ^ b32[0]) |
+- (a32[1] ^ b32[1]) | (a32[2] ^ b32[2]);
++ return (a16[0] ^ b16[0]) | (a16[1] ^ b16[1]) | (a16[2] ^ b16[2]) |
++ (a16[3] ^ b16[3]) | (a16[4] ^ b16[4]) | (a16[5] ^ b16[5]) |
++ (a16[6] ^ b16[6]);
+ #endif
+ }
+
+--- a/net/ipv4/tcp_offload.c
++++ b/net/ipv4/tcp_offload.c
+@@ -223,7 +223,7 @@ struct sk_buff *tcp_gro_receive(struct l
+
+ th2 = tcp_hdr(p);
+
+- if (*(u32 *)&th->source ^ *(u32 *)&th2->source) {
++ if (net_hdr_word(&th->source) ^ net_hdr_word(&th2->source)) {
+ NAPI_GRO_CB(p)->same_flow = 0;
+ continue;
+ }
+@@ -241,8 +241,8 @@ found:
+ ~(TCP_FLAG_CWR | TCP_FLAG_FIN | TCP_FLAG_PSH));
+ flush |= (__force int)(th->ack_seq ^ th2->ack_seq);
+ for (i = sizeof(*th); i < thlen; i += 4)
+- flush |= *(u32 *)((u8 *)th + i) ^
+- *(u32 *)((u8 *)th2 + i);
++ flush |= net_hdr_word((u8 *)th + i) ^
++ net_hdr_word((u8 *)th2 + i);
+
+ /* When we receive our second frame we can made a decision on if we
+ * continue this flow as an atomic flow with a fixed ID or if we use
+--- a/net/ipv6/netfilter/ip6table_mangle.c
++++ b/net/ipv6/netfilter/ip6table_mangle.c
+@@ -47,7 +47,7 @@ ip6t_mangle_out(struct sk_buff *skb, con
+ hop_limit = ipv6_hdr(skb)->hop_limit;
+
+ /* flowlabel and prio (includes version, which shouldn't change either */
+- flowlabel = *((u_int32_t *)ipv6_hdr(skb));
++ flowlabel = net_hdr_word(ipv6_hdr(skb));
+
+ ret = ip6t_do_table(skb, state, state->net->ipv6.ip6table_mangle);
+
+@@ -56,7 +56,7 @@ ip6t_mangle_out(struct sk_buff *skb, con
+ !ipv6_addr_equal(&ipv6_hdr(skb)->daddr, &daddr) ||
+ skb->mark != mark ||
+ ipv6_hdr(skb)->hop_limit != hop_limit ||
+- flowlabel != *((u_int32_t *)ipv6_hdr(skb)))) {
++ flowlabel != net_hdr_word(ipv6_hdr(skb)))) {
+ err = ip6_route_me_harder(state->net, state->sk, skb);
+ if (err < 0)
+ ret = NF_DROP_ERR(err);
diff --git a/target/linux/ath79/patches-5.10/921-serial-core-add-support-for-boot-console-with-arbitr.patch b/target/linux/ath79/patches-5.10/921-serial-core-add-support-for-boot-console-with-arbitr.patch
new file mode 100644
index 0000000000..dac2064cbb
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/921-serial-core-add-support-for-boot-console-with-arbitr.patch
@@ -0,0 +1,54 @@
+From 4d3c17975c7814884a721fe693b3adf5c426d759 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Tue, 10 Nov 2015 22:18:39 +0100
+Subject: [RFC] serial: core: add support for boot console with arbitrary
+ baud rates
+
+The Arduino Yun uses a baud rate of 250000 by default. The serial is
+going over the Atmel ATmega and is used to connect to this chip.
+Without this patch Linux wants to switch the console to 9600 Baud.
+
+With this patch Linux will use the configured baud rate and not a
+default one specified in uart_register_driver().
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+[rebased to 4.14, slightly reworded commit message]
+Signed-off-by: Sungbo Eo <mans0n@gorani.run>
+---
+ drivers/tty/serial/serial_core.c | 6 +++++-
+ include/linux/console.h | 1 +
+ 2 files changed, 6 insertions(+), 1 deletions(-)
+
+--- a/drivers/tty/serial/serial_core.c
++++ b/drivers/tty/serial/serial_core.c
+@@ -220,6 +220,8 @@ static int uart_port_startup(struct tty_
+ if (retval == 0) {
+ if (uart_console(uport) && uport->cons->cflag) {
+ tty->termios.c_cflag = uport->cons->cflag;
++ tty->termios.c_ospeed = uport->cons->baud;
++ tty->termios.c_ispeed = uport->cons->baud;
+ uport->cons->cflag = 0;
+ }
+ /*
+@@ -2108,8 +2110,10 @@ uart_set_options(struct uart_port *port,
+ * Allow the setting of the UART parameters with a NULL console
+ * too:
+ */
+- if (co)
++ if (co) {
+ co->cflag = termios.c_cflag;
++ co->baud = baud;
++ }
+
+ return 0;
+ }
+--- a/include/linux/console.h
++++ b/include/linux/console.h
+@@ -153,6 +153,7 @@ struct console {
+ short flags;
+ short index;
+ int cflag;
++ int baud;
+ void *data;
+ struct console *next;
+ };
diff --git a/target/linux/ath79/patches-5.10/930-ar8216-make-reg-access-atomic.patch b/target/linux/ath79/patches-5.10/930-ar8216-make-reg-access-atomic.patch
new file mode 100644
index 0000000000..02f763534e
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/930-ar8216-make-reg-access-atomic.patch
@@ -0,0 +1,59 @@
+From b3797d1a92afe97c173b00fdb7824cedba24eef0 Mon Sep 17 00:00:00 2001
+From: Chuanhong Guo <gch981213@gmail.com>
+Date: Sun, 20 Sep 2020 01:00:45 +0800
+Subject: [PATCH] ath79: ar8216: make switch register access atomic
+
+due to some unknown reason these register accesses sometimes fail
+on the integrated switch without this patch.
+
+THIS ONLY WORKS ON ATH79 AND MAY BREAK THE DRIVER ON OTHER PLATFORMS!
+The mdio bus on ath79 works in polling mode and doesn't rely on
+any interrupt. This patch breaks the driver on any mdio master
+with interrupts used.
+
+---
+--- a/drivers/net/phy/ar8216.c
++++ b/drivers/net/phy/ar8216.c
+@@ -252,6 +252,7 @@ ar8xxx_mii_write32(struct ar8xxx_priv *p
+ u32
+ ar8xxx_read(struct ar8xxx_priv *priv, int reg)
+ {
++ unsigned long flags;
+ struct mii_bus *bus = priv->mii_bus;
+ u16 r1, r2, page;
+ u32 val;
+@@ -259,11 +260,13 @@ ar8xxx_read(struct ar8xxx_priv *priv, in
+ split_addr((u32) reg, &r1, &r2, &page);
+
+ mutex_lock(&bus->mdio_lock);
++ local_irq_save(flags);
+
+ bus->write(bus, 0x18, 0, page);
+ wait_for_page_switch();
+ val = ar8xxx_mii_read32(priv, 0x10 | r2, r1);
+
++ local_irq_restore(flags);
+ mutex_unlock(&bus->mdio_lock);
+
+ return val;
+@@ -272,17 +275,20 @@ ar8xxx_read(struct ar8xxx_priv *priv, in
+ void
+ ar8xxx_write(struct ar8xxx_priv *priv, int reg, u32 val)
+ {
++ unsigned long flags;
+ struct mii_bus *bus = priv->mii_bus;
+ u16 r1, r2, page;
+
+ split_addr((u32) reg, &r1, &r2, &page);
+
+ mutex_lock(&bus->mdio_lock);
++ local_irq_save(flags);
+
+ bus->write(bus, 0x18, 0, page);
+ wait_for_page_switch();
+ ar8xxx_mii_write32(priv, 0x10 | r2, r1, val);
+
++ local_irq_restore(flags);
+ mutex_unlock(&bus->mdio_lock);
+ }
+
diff --git a/target/linux/ath79/tiny/target.mk b/target/linux/ath79/tiny/target.mk
index 91f135b56e..74b3e966c4 100644
--- a/target/linux/ath79/tiny/target.mk
+++ b/target/linux/ath79/tiny/target.mk
@@ -3,6 +3,8 @@ FEATURES += small_flash
DEFAULT_PACKAGES += wpad-basic-wolfssl
+KERNEL_TESTING_PATCHVER:=5.10
+
define Target/Description
Build firmware images for Atheros AR71xx/AR913x/AR934x based boards with small flash
endef