strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

SVN-Revision: 8653

2 files changed, 0 insertions, 653 deletions

diff --git a/target/linux/atheros-2.6/files/drivers/mtd/devices/spiflash.c b/target/linux/atheros-2.6/files/drivers/mtd/devices/spiflash.c
deleted file mode 100644
index 7bfc252efe..0000000000
--- a/target/linux/atheros-2.6/files/drivers/mtd/devices/spiflash.c
+++ /dev/null
@@ -1,533 +0,0 @@
-
-/*
- * MTD driver for the SPI Flash Memory support.
- *
- * Copyright (c) 2005-2006 Atheros Communications Inc.
- * Copyright (C) 2006-2007 FON Technology, SL.
- * Copyright (C) 2006-2007 Imre Kaloz <kaloz@openwrt.org>
- * Copyright (C) 2006-2007 Felix Fietkau <nbd@openwrt.org>
- *
- * This code is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-/*===========================================================================
-** !!!!  VERY IMPORTANT NOTICE !!!!  FLASH DATA STORED IN LITTLE ENDIAN FORMAT
-**
-** This module contains the Serial Flash access routines for the Atheros SOC.
-** The Atheros SOC integrates a SPI flash controller that is used to access
-** serial flash parts. The SPI flash controller executes in "Little Endian"
-** mode. THEREFORE, all WRITES and READS from the MIPS CPU must be
-** BYTESWAPPED! The SPI Flash controller hardware by default performs READ
-** ONLY byteswapping when accessed via the SPI Flash Alias memory region
-** (Physical Address 0x0800_0000 - 0x0fff_ffff). The data stored in the
-** flash sectors is stored in "Little Endian" format.
-**
-** The spiflash_write() routine performs byteswapping on all write
-** operations.
-**===========================================================================*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/version.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/squashfs_fs.h>
-#include <linux/root_dev.h>
-#include <linux/delay.h>
-#include <asm/delay.h>
-#include <asm/io.h>
-#include "spiflash.h"
-
-#ifndef __BIG_ENDIAN
-#error This driver currently only works with big endian CPU.
-#endif
-
-#define MAX_PARTS 32
-
-#define SPIFLASH "spiflash: "
-
-#define MIN(a,b)        ((a) < (b) ? (a) : (b))
-
-#define busy_wait(condition, wait) \
-	do { \
-		while (condition) { \
-			spin_unlock_bh(&spidata->mutex); \
-			if (wait > 1) \
-				msleep(wait); \
-			else if ((wait == 1) && need_resched()) \
-				schedule(); \
-			else \
-				udelay(1); \
-			spin_lock_bh(&spidata->mutex); \
-		} \
-	} while (0)
-		
-
-static __u32 spiflash_regread32(int reg);
-static void spiflash_regwrite32(int reg, __u32 data);
-static __u32 spiflash_sendcmd (int op, u32 addr);
-
-int __init spiflash_init (void);
-void __exit spiflash_exit (void);
-static int spiflash_probe_chip (void);
-static int spiflash_erase (struct mtd_info *mtd,struct erase_info *instr);
-static int spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf);
-static int spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf);
-
-/* Flash configuration table */
-struct flashconfig {
-    __u32 byte_cnt;
-    __u32 sector_cnt;
-    __u32 sector_size;
-    __u32 cs_addrmask;
-} flashconfig_tbl[MAX_FLASH] =
-    {
-        { 0, 0, 0, 0},
-        { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE, 0x0},
-        { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE, 0x0},
-        { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE, 0x0},
-        { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE, 0x0},
-        { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT, STM_16MB_SECTOR_SIZE, 0x0}
-    };
-
-/* Mapping of generic opcodes to STM serial flash opcodes */
-#define SPI_WRITE_ENABLE    0
-#define SPI_WRITE_DISABLE   1
-#define SPI_RD_STATUS       2
-#define SPI_WR_STATUS       3
-#define SPI_RD_DATA         4
-#define SPI_FAST_RD_DATA    5
-#define SPI_PAGE_PROGRAM    6
-#define SPI_SECTOR_ERASE    7
-#define SPI_BULK_ERASE      8
-#define SPI_DEEP_PWRDOWN    9
-#define SPI_RD_SIG          10
-#define SPI_MAX_OPCODES     11
-
-struct opcodes {
-    __u16 code;
-    __s8 tx_cnt;
-    __s8 rx_cnt;
-} stm_opcodes[] = {
-        {STM_OP_WR_ENABLE, 1, 0},
-        {STM_OP_WR_DISABLE, 1, 0},
-        {STM_OP_RD_STATUS, 1, 1},
-        {STM_OP_WR_STATUS, 1, 0},
-        {STM_OP_RD_DATA, 4, 4},
-        {STM_OP_FAST_RD_DATA, 5, 0},
-        {STM_OP_PAGE_PGRM, 8, 0},
-        {STM_OP_SECTOR_ERASE, 4, 0},
-        {STM_OP_BULK_ERASE, 1, 0},
-        {STM_OP_DEEP_PWRDOWN, 1, 0},
-        {STM_OP_RD_SIG, 4, 1},
-};
-
-/* Driver private data structure */
-struct spiflash_data {
-	struct 	mtd_info       *mtd;	
-	struct 	mtd_partition  *parsed_parts;     /* parsed partitions */
-	void 	*readaddr; /* memory mapped data for read  */
-	void 	*mmraddr;  /* memory mapped register space */
-	wait_queue_head_t wq;
-	spinlock_t mutex;
-	int state;
-};
-enum {
-	FL_READY,
-	FL_READING,
-	FL_ERASING,
-	FL_WRITING
-};
-
-static struct spiflash_data *spidata;
-
-extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
-
-/***************************************************************************************************/
-
-static __u32
-spiflash_regread32(int reg)
-{
-	volatile __u32 *data = (__u32 *)(spidata->mmraddr + reg);
-
-	return (*data);
-}
-
-static void 
-spiflash_regwrite32(int reg, __u32 data)
-{
-	volatile __u32 *addr = (__u32 *)(spidata->mmraddr + reg);
-
-	*addr = data;
-	return;
-}
-
-
-static __u32 
-spiflash_sendcmd (int op, u32 addr)
-{
-	 u32 reg;
-	 u32 mask;
-	struct opcodes *ptr_opcode;
-
-	ptr_opcode = &stm_opcodes[op];
-	busy_wait((reg = spiflash_regread32(SPI_FLASH_CTL)) & SPI_CTL_BUSY, 0);
-	spiflash_regwrite32(SPI_FLASH_OPCODE, ((u32) ptr_opcode->code) | (addr << 8));
-
-	reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt |
-        	(ptr_opcode->rx_cnt << 4) | SPI_CTL_START;
-
-	spiflash_regwrite32(SPI_FLASH_CTL, reg);
-	busy_wait(spiflash_regread32(SPI_FLASH_CTL) & SPI_CTL_BUSY, 0);
- 
-	if (!ptr_opcode->rx_cnt)
-		return 0;
-
-	reg = (__u32) spiflash_regread32(SPI_FLASH_DATA);
-
-	switch (ptr_opcode->rx_cnt) {
-	case 1:
-			mask = 0x000000ff;
-			break;
-	case 2:
-			mask = 0x0000ffff;
-			break;
-	case 3:
-			mask = 0x00ffffff;
-			break;
-	default:
-			mask = 0xffffffff;
-			break;
-	}
-	reg &= mask;
-
-	return reg;
-}
-
-
-
-/* Probe SPI flash device
- * Function returns 0 for failure.
- * and flashconfig_tbl array index for success.
- */
-static int 
-spiflash_probe_chip (void)
-{
-	__u32 sig;
-   	int flash_size;
-	
-   	/* Read the signature on the flash device */
-	spin_lock_bh(&spidata->mutex);
-   	sig = spiflash_sendcmd(SPI_RD_SIG, 0);
-	spin_unlock_bh(&spidata->mutex);
-
-   	switch (sig) {
-   	case STM_8MBIT_SIGNATURE:
-            	flash_size = FLASH_1MB;
-        	break;
-        case STM_16MBIT_SIGNATURE:
-            	flash_size = FLASH_2MB;
-            	break;
-        case STM_32MBIT_SIGNATURE:
-            	flash_size = FLASH_4MB;
-            	break;
-        case STM_64MBIT_SIGNATURE:
-            	flash_size = FLASH_8MB;
-            	break;
-        case STM_128MBIT_SIGNATURE:
-            	flash_size = FLASH_16MB;
-            	break;
-        default:
-	    	printk (KERN_WARNING SPIFLASH "Read of flash device signature failed!\n");
-            	return (0);
-   	}
-
-   	return (flash_size);
-}
-
-
-/* wait until the flash chip is ready and grab a lock */
-static int spiflash_wait_ready(int state)
-{
-	DECLARE_WAITQUEUE(wait, current);
-
-retry:
-	spin_lock_bh(&spidata->mutex);
-	if (spidata->state != FL_READY) {
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		add_wait_queue(&spidata->wq, &wait);
-		spin_unlock_bh(&spidata->mutex);
-		schedule();
-		remove_wait_queue(&spidata->wq, &wait);
-		
-		if(signal_pending(current))
-			return 0;
-
-		goto retry;
-	}
-	spidata->state = state;
-
-	return 1;
-}
-
-static inline void spiflash_done(void)
-{
-	spidata->state = FL_READY;
-	spin_unlock_bh(&spidata->mutex);
-	wake_up(&spidata->wq);
-}
-
-static int 
-spiflash_erase (struct mtd_info *mtd,struct erase_info *instr)
-{
-	struct opcodes *ptr_opcode;
-	u32 temp, reg;
-
-   	/* sanity checks */
-   	if (instr->addr + instr->len > mtd->size) return (-EINVAL);
-
-	if (!spiflash_wait_ready(FL_ERASING))
-		return -EINTR;
-
-	spiflash_sendcmd(SPI_WRITE_ENABLE, 0);
-	busy_wait((reg = spiflash_regread32(SPI_FLASH_CTL)) & SPI_CTL_BUSY, 0);
-	reg = spiflash_regread32(SPI_FLASH_CTL);
-
-	ptr_opcode = &stm_opcodes[SPI_SECTOR_ERASE];
-	temp = ((__u32)instr->addr << 8) | (__u32)(ptr_opcode->code);
-	spiflash_regwrite32(SPI_FLASH_OPCODE, temp);
-
-	reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt | SPI_CTL_START;
-	spiflash_regwrite32(SPI_FLASH_CTL, reg);
-
-	/* this will take some time */
-	spin_unlock_bh(&spidata->mutex);
-	msleep(800);
-	spin_lock_bh(&spidata->mutex);
-	
-	busy_wait(spiflash_sendcmd(SPI_RD_STATUS, 0) & SPI_STATUS_WIP, 20);
-	spiflash_done();
-
-   	instr->state = MTD_ERASE_DONE;
-   	if (instr->callback) instr->callback (instr);
-
-   	return 0;
-}
-
-static int 
-spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf)
-{
-	u8 *read_addr;
-	
-   	/* sanity checks */
-   	if (!len) return (0);
-   	if (from + len > mtd->size) return (-EINVAL);
-	
-   	/* we always read len bytes */
-   	*retlen = len;
-
-	if (!spiflash_wait_ready(FL_READING))
-		return -EINTR;
-	read_addr = (u8 *)(spidata->readaddr + from);
-	memcpy(buf, read_addr, len);
-	spiflash_done();
-
-   	return 0;
-}
-
-static int 
-spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf)
-{
-	u32 opcode, bytes_left;
-
-   	*retlen = 0;
-
-   	/* sanity checks */
-   	if (!len) return (0);
-   	if (to + len > mtd->size) return (-EINVAL);
-	
-	opcode = stm_opcodes[SPI_PAGE_PROGRAM].code;
-	bytes_left = len;
-	
-	do {
-		u32 xact_len, reg, page_offset, spi_data = 0;
-
-		xact_len = MIN(bytes_left, sizeof(__u32));
-
-		/* 32-bit writes cannot span across a page boundary
-		 * (256 bytes). This types of writes require two page
-		 * program operations to handle it correctly. The STM part
-		 * will write the overflow data to the beginning of the
-		 * current page as opposed to the subsequent page.
-		 */
-		page_offset = (to & (STM_PAGE_SIZE - 1)) + xact_len;
-
-		if (page_offset > STM_PAGE_SIZE) {
-			xact_len -= (page_offset - STM_PAGE_SIZE);
-		}
-
-		if (!spiflash_wait_ready(FL_WRITING))
-			return -EINTR;
-
-		spiflash_sendcmd(SPI_WRITE_ENABLE, 0);
-		switch (xact_len) {
-			case 1:
-			 	spi_data = (u32) ((u8) *buf);
-				break;
-			case 2:
-				spi_data = (buf[1] << 8) | buf[0];
-				break;
-			case 3:
-				spi_data = (buf[2] << 16) | (buf[1] << 8) | buf[0];
-				break;
-			case 4:
-				spi_data = (buf[3] << 24) | (buf[2] << 16) | 
-							(buf[1] << 8) | buf[0];
-				break;
-			default:
-				spi_data = 0;
-				break;
-		}
-
-		spiflash_regwrite32(SPI_FLASH_DATA, spi_data);
-		opcode = (opcode & SPI_OPCODE_MASK) | ((__u32)to << 8);
-		spiflash_regwrite32(SPI_FLASH_OPCODE, opcode);
-
-		reg = spiflash_regread32(SPI_FLASH_CTL);
-		reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | (xact_len + 4) | SPI_CTL_START;
-		spiflash_regwrite32(SPI_FLASH_CTL, reg);
-
-		/* give the chip some time before we start busy waiting */
-		spin_unlock_bh(&spidata->mutex);
-		schedule();
-		spin_lock_bh(&spidata->mutex);
-
-		busy_wait(spiflash_sendcmd(SPI_RD_STATUS, 0) & SPI_STATUS_WIP, 0);
-		spiflash_done();
-
-		bytes_left -= xact_len;
-		to += xact_len;
-		buf += xact_len;
-
-   		*retlen += xact_len;
-	} while (bytes_left != 0);
-
-   	return 0;
-}
-
-
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
-#endif
-
-
-static int spiflash_probe(struct platform_device *pdev)
-{
-   	int result = -1;
-   	int index, num_parts;
-	struct mtd_info *mtd;
-
-	spidata->mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE);
-	spin_lock_init(&spidata->mutex);
-	init_waitqueue_head(&spidata->wq);
-	spidata->state = FL_READY;
-	
-	if (!spidata->mmraddr) {
-  		printk (KERN_WARNING SPIFLASH "Failed to map flash device\n");
-		kfree(spidata);
-		spidata = NULL;
-	}
-
-   	mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
-   	if (!mtd) {
-		kfree(spidata);
-		return -ENXIO;
-	}
-	
-   	if (!(index = spiflash_probe_chip())) {
-    	printk (KERN_WARNING SPIFLASH "Found no serial flash device\n");
-		goto error;
-   	}
-
-	spidata->readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt);
-	if (!spidata->readaddr) {
-		printk (KERN_WARNING SPIFLASH "Failed to map flash device\n");
-		goto error;
-	}
-
-   	mtd->name = "spiflash";
-   	mtd->type = MTD_NORFLASH;
-   	mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE);
-   	mtd->size = flashconfig_tbl[index].byte_cnt;
-   	mtd->erasesize = flashconfig_tbl[index].sector_size;
-	mtd->writesize = 1;
-   	mtd->numeraseregions = 0;
-   	mtd->eraseregions = NULL;
-   	mtd->erase = spiflash_erase;
-   	mtd->read = spiflash_read;
-   	mtd->write = spiflash_write;
-	mtd->owner = THIS_MODULE;
-
-   	/* parse redboot partitions */
-	num_parts = parse_mtd_partitions(mtd, part_probe_types, &spidata->parsed_parts, 0);
-	if (!num_parts)
-		goto error;
-
-	result = add_mtd_partitions(mtd, spidata->parsed_parts, num_parts);
-	spidata->mtd = mtd;
-	
-   	return (result);
-	
-error:
-	kfree(mtd);
-	kfree(spidata);
-	return -ENXIO;
-}
-
-static int spiflash_remove (struct platform_device *pdev)
-{
-	del_mtd_partitions (spidata->mtd);
-	kfree(spidata->mtd);
-	return 0;
-}
-
-struct platform_driver spiflash_driver = {
-	.driver.name = "spiflash",
-	.probe = spiflash_probe,
-	.remove = spiflash_remove,
-};
-
-int __init 
-spiflash_init (void)
-{
-   	spidata = kmalloc(sizeof(struct spiflash_data), GFP_KERNEL);
-  	if (!spidata)
-		return (-ENXIO);
-
-	spin_lock_init(&spidata->mutex);
-	platform_driver_register(&spiflash_driver);
-
-	return 0;
-}
-
-void __exit 
-spiflash_exit (void)
-{
-	kfree(spidata);
-}
-
-module_init (spiflash_init);
-module_exit (spiflash_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("OpenWrt.org, Atheros Communications Inc");
-MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC");
-
diff --git a/target/linux/atheros-2.6/files/drivers/mtd/devices/spiflash.h b/target/linux/atheros-2.6/files/drivers/mtd/devices/spiflash.h
deleted file mode 100644
index 2553c6f50f..0000000000
--- a/target/linux/atheros-2.6/files/drivers/mtd/devices/spiflash.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * SPI Flash Memory support header file.
- *
- * $Id: //depot/sw/releases/linuxsrc/src/kernels/mips-linux-2.4.25/drivers/mtd/devices/spiflash.h#3 $
- *
- *
- * Copyright (c) 2005, Atheros Communications Inc.
- * Copyright (C) 2006 FON Technology, SL.
- * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
- *
- * This code is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#define FLASH_1MB  1
-#define FLASH_2MB  2
-#define FLASH_4MB  3
-#define FLASH_8MB  4
-#define FLASH_16MB 5
-#define MAX_FLASH  6
-
-#define STM_PAGE_SIZE           256
-
-#define SFI_WRITE_BUFFER_SIZE   4
-#define SFI_FLASH_ADDR_MASK     0x00ffffff
-
-#define STM_8MBIT_SIGNATURE     0x13
-#define STM_M25P80_BYTE_COUNT   1048576
-#define STM_M25P80_SECTOR_COUNT 16
-#define STM_M25P80_SECTOR_SIZE  0x10000
-
-#define STM_16MBIT_SIGNATURE    0x14
-#define STM_M25P16_BYTE_COUNT   2097152
-#define STM_M25P16_SECTOR_COUNT 32
-#define STM_M25P16_SECTOR_SIZE  0x10000
-
-#define STM_32MBIT_SIGNATURE    0x15
-#define STM_M25P32_BYTE_COUNT   4194304
-#define STM_M25P32_SECTOR_COUNT 64
-#define STM_M25P32_SECTOR_SIZE  0x10000
-
-#define STM_64MBIT_SIGNATURE    0x16
-#define STM_M25P64_BYTE_COUNT   8388608
-#define STM_M25P64_SECTOR_COUNT 128
-#define STM_M25P64_SECTOR_SIZE  0x10000
-
-#define STM_128MBIT_SIGNATURE   0x17
-#define STM_M25P128_BYTE_COUNT   16777216
-#define STM_M25P128_SECTOR_COUNT 256
-#define STM_M25P128_SECTOR_SIZE  0x10000
-
-#define STM_1MB_BYTE_COUNT   STM_M25P80_BYTE_COUNT
-#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT
-#define STM_1MB_SECTOR_SIZE  STM_M25P80_SECTOR_SIZE
-#define STM_2MB_BYTE_COUNT   STM_M25P16_BYTE_COUNT
-#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT
-#define STM_2MB_SECTOR_SIZE  STM_M25P16_SECTOR_SIZE
-#define STM_4MB_BYTE_COUNT   STM_M25P32_BYTE_COUNT
-#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT
-#define STM_4MB_SECTOR_SIZE  STM_M25P32_SECTOR_SIZE
-#define STM_8MB_BYTE_COUNT   STM_M25P64_BYTE_COUNT
-#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT
-#define STM_8MB_SECTOR_SIZE  STM_M25P64_SECTOR_SIZE
-#define STM_16MB_BYTE_COUNT   STM_M25P128_BYTE_COUNT
-#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT
-#define STM_16MB_SECTOR_SIZE  STM_M25P128_SECTOR_SIZE
-
-/*
- * ST Microelectronics Opcodes for Serial Flash
- */
-
-#define STM_OP_WR_ENABLE       0x06     /* Write Enable */
-#define STM_OP_WR_DISABLE      0x04     /* Write Disable */
-#define STM_OP_RD_STATUS       0x05     /* Read Status */
-#define STM_OP_WR_STATUS       0x01     /* Write Status */
-#define STM_OP_RD_DATA         0x03     /* Read Data */
-#define STM_OP_FAST_RD_DATA    0x0b     /* Fast Read Data */
-#define STM_OP_PAGE_PGRM       0x02     /* Page Program */
-#define STM_OP_SECTOR_ERASE    0xd8     /* Sector Erase */
-#define STM_OP_BULK_ERASE      0xc7     /* Bulk Erase */
-#define STM_OP_DEEP_PWRDOWN    0xb9     /* Deep Power-Down Mode */
-#define STM_OP_RD_SIG          0xab     /* Read Electronic Signature */
-
-#define STM_STATUS_WIP       0x01       /* Write-In-Progress */
-#define STM_STATUS_WEL       0x02       /* Write Enable Latch */
-#define STM_STATUS_BP0       0x04       /* Block Protect 0 */
-#define STM_STATUS_BP1       0x08       /* Block Protect 1 */
-#define STM_STATUS_BP2       0x10       /* Block Protect 2 */
-#define STM_STATUS_SRWD      0x80       /* Status Register Write Disable */
-
-/*
- * SPI Flash Interface Registers
- */
-#define AR531XPLUS_SPI_READ     0x08000000
-#define AR531XPLUS_SPI_MMR      0x11300000
-#define AR531XPLUS_SPI_MMR_SIZE 12
-
-#define AR531XPLUS_SPI_CTL      0x00
-#define AR531XPLUS_SPI_OPCODE   0x04
-#define AR531XPLUS_SPI_DATA     0x08
-
-#define SPI_FLASH_READ          AR531XPLUS_SPI_READ
-#define SPI_FLASH_MMR           AR531XPLUS_SPI_MMR
-#define SPI_FLASH_MMR_SIZE      AR531XPLUS_SPI_MMR_SIZE
-#define SPI_FLASH_CTL           AR531XPLUS_SPI_CTL
-#define SPI_FLASH_OPCODE        AR531XPLUS_SPI_OPCODE
-#define SPI_FLASH_DATA          AR531XPLUS_SPI_DATA
-
-#define SPI_CTL_START           0x00000100
-#define SPI_CTL_BUSY            0x00010000
-#define SPI_CTL_TXCNT_MASK      0x0000000f
-#define SPI_CTL_RXCNT_MASK      0x000000f0
-#define SPI_CTL_TX_RX_CNT_MASK  0x000000ff
-#define SPI_CTL_SIZE_MASK       0x00060000
-
-#define SPI_CTL_CLK_SEL_MASK    0x03000000
-#define SPI_OPCODE_MASK         0x000000ff
-
-#define SPI_STATUS_WIP		STM_STATUS_WIP