aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm27xx/bcm2710
diff options
context:
space:
mode:
authorPavel Balan <admin@kryma.net>2020-03-27 03:32:55 +0000
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-05-28 01:47:54 +0200
commitad84c095028f6ddef95a92e028760cce23d32f6c (patch)
treea0ff1685429d6d89a847852f4720d7ecc78bad63 /target/linux/bcm27xx/bcm2710
parent2b92ee36ae93456b16ca2813612d663dfeb65832 (diff)
downloadupstream-ad84c095028f6ddef95a92e028760cce23d32f6c.tar.gz
upstream-ad84c095028f6ddef95a92e028760cce23d32f6c.tar.bz2
upstream-ad84c095028f6ddef95a92e028760cce23d32f6c.zip
ath79: add support for COMFAST CF-E130N v2
This patch adds support for the COMFAST CF-E130N v2, an outdoor wireless CPE with a single Ethernet port and a 802.11bgn radio. Specifications: - QCA9531 SoC - 1x 10/100 Mbps Ethernet with PoE-in support - 64 MB of RAM (DDR2) - 16 MB of FLASH - 5 dBi built-in antenna - POWER/LAN/WLAN green LEDs - 4x RSSI LEDs (2x red, 2x green) - UART (115200 8N1) and GPIO (J9) headers on PCB Flashing instructions: The original firmware is based on OpenWrt so a sysupgrade image can be installed via the stock web GUI. The U-boot bootloader also contains a backup TFTP client to upload the firmware from. Upon boot, it checks its ethernet network for the IP 192.168.1.10. Host a TFTP server and provide the image to be flashed as file firmware_auto.bin. MAC address setup: The art partition contains four consecutive MAC addresses: 0x0 aa:bb:cc:xx:xx:c4 0x6 aa:bb:cc:xx:xx:c6 0x1002 aa:bb:cc:xx:xx:c5 0x5006 aa:bb:cc:xx:xx:c7 However, the manufacturer in its infinite wisdom decided that one address is enough and both eth0 and WiFi get the MAC address from 0x0 (yes, that's overwriting the existing and valid address in 0x1002). This is obviously also the address on the device's label. Signed-off-by: Pavel Balan <admin@kryma.net> [fix configs partition, fix IMAGE_SIZE, add MAC address comment, rename ATH_SOC to SOC] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/bcm27xx/bcm2710')
0 files changed, 0 insertions, 0 deletions