brcm2708: rename target to bcm27xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Despite, since subtargets range from bcm2708 to bcm2711, it seems
appropriate to use bcm27xx instead of bcm2708 (again, as already done
for BOARDNAME).

This also renames the packages brcm2708-userland and brcm2708-gpu-fw.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 320 insertions, 0 deletions

diff --git a/target/linux/bcm27xx/patches-4.19/950-0260-ASoC-Add-support-for-AudioSense-Pi-add-on-soundcard.patch b/target/linux/bcm27xx/patches-4.19/950-0260-ASoC-Add-support-for-AudioSense-Pi-add-on-soundcard.patch
new file mode 100644
index 0000000000..1ab87d5a54
--- /dev/null
+++ b/target/linux/bcm27xx/patches-4.19/950-0260-ASoC-Add-support-for-AudioSense-Pi-add-on-soundcard.patch
@@ -0,0 +1,320 @@
+From 5705594ae56861cb63e7a3de1854e29ad1e830fd Mon Sep 17 00:00:00 2001
+From: b-ak <anur.bhargav@gmail.com>
+Date: Thu, 3 Jan 2019 00:01:08 +0530
+Subject: [PATCH] ASoC: Add support for AudioSense-Pi add-on soundcard
+
+AudioSense-Pi is a RPi HAT based on a TI's TLV320AIC32x4 stereo codec
+
+This hardware provides multiple audio I/O capabilities to the RPi.
+The codec connects to the RPi's SoC through the I2S Bus.
+
+The following devices can be connected through a 3.5mm jack
+	1. Line-In: Plain old audio in from mobile phones, PCs, etc.,
+	2. Mic-In: Connect a microphone
+	3. Line-Out: Connect the output to a speaker
+	4. Headphones: Connect a Headphone w or w/o microphones
+
+Multiple Inputs:
+	It supports the following combinations
+	1. Two stereo Line-Inputs and a microphone
+	2. One stereo Line-Input and two microphones
+	3. Two stereo Line-Inputs, a microphone and
+		one mono line-input (with h/w hack)
+	4. One stereo Line-Input, two microphones and
+		one mono line-input (with h/w hack)
+
+Multiple Outputs:
+	Audio output can be routed to the headphones or
+		speakers (with additional hardware)
+
+Signed-off-by: b-ak <anur.bhargav@gmail.com>
+---
+ sound/soc/bcm/Kconfig         |   7 +
+ sound/soc/bcm/Makefile        |   2 +
+ sound/soc/bcm/audiosense-pi.c | 246 ++++++++++++++++++++++++++++++++++
+ 3 files changed, 255 insertions(+)
+ create mode 100644 sound/soc/bcm/audiosense-pi.c
+
+--- a/sound/soc/bcm/Kconfig
++++ b/sound/soc/bcm/Kconfig
+@@ -137,6 +137,13 @@ config SND_AUDIOINJECTOR_OCTO_SOUNDCARD
+ 	help
+ 	  Say Y or M if you want to add support for audioinjector.net octo add on
+ 
++config SND_AUDIOSENSE_PI
++	tristate "Support for AudioSense Add-On Soundcard"
++	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
++	select SND_SOC_TLV320AIC32X4_I2C
++	help
++	  Say Y or M if you want to add support for tlv320aic32x4 add-on
++
+ config SND_DIGIDAC1_SOUNDCARD
+         tristate "Support for Red Rocks Audio DigiDAC1"
+         depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
+--- a/sound/soc/bcm/Makefile
++++ b/sound/soc/bcm/Makefile
+@@ -20,6 +20,7 @@ snd-soc-rpi-proto-objs := rpi-proto.o
+ snd-soc-iqaudio-dac-objs := iqaudio-dac.o
+ snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o
+ snd-soc-audioinjector-octo-soundcard-objs := audioinjector-octo-soundcard.o
++snd-soc-audiosense-pi-objs := audiosense-pi.o
+ snd-soc-digidac1-soundcard-objs := digidac1-soundcard.o
+ snd-soc-dionaudio-loco-objs := dionaudio_loco.o
+ snd-soc-dionaudio-loco-v2-objs := dionaudio_loco-v2.o
+@@ -41,6 +42,7 @@ obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO)
+ obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o
+ obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o
+ obj-$(CONFIG_SND_AUDIOINJECTOR_OCTO_SOUNDCARD) += snd-soc-audioinjector-octo-soundcard.o
++obj-$(CONFIG_SND_AUDIOSENSE_PI) += snd-soc-audiosense-pi.o
+ obj-$(CONFIG_SND_DIGIDAC1_SOUNDCARD) += snd-soc-digidac1-soundcard.o
+ obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO) += snd-soc-dionaudio-loco.o
+ obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2) += snd-soc-dionaudio-loco-v2.o
+--- /dev/null
++++ b/sound/soc/bcm/audiosense-pi.c
+@@ -0,0 +1,246 @@
++/*
++ * ASoC Driver for AudioSense add on soundcard
++ * Author:
++ *	Bhargav A K <anur.bhargav@gmail.com>
++ *	Copyright 2017
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <linux/i2c.h>
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/soc.h>
++#include <sound/jack.h>
++#include <sound/control.h>
++
++#include <sound/tlv320aic32x4.h>
++#include "../codecs/tlv320aic32x4.h"
++
++#define AIC32X4_SYSCLK_XTAL	0x00
++
++/*
++ * Setup Codec Sample Rates and Channels
++ * Supported Rates:
++ *	8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, 88200, 96000,
++ */
++static const unsigned int audiosense_pi_rate[] = {
++	48000,
++};
++
++static struct snd_pcm_hw_constraint_list audiosense_constraints_rates = {
++	.list = audiosense_pi_rate,
++	.count = ARRAY_SIZE(audiosense_pi_rate),
++};
++
++static const unsigned int audiosense_pi_channels[] = {
++	2,
++};
++
++static struct snd_pcm_hw_constraint_list audiosense_constraints_ch = {
++	.count = ARRAY_SIZE(audiosense_pi_channels),
++	.list = audiosense_pi_channels,
++	.mask = 0,
++};
++
++/* Setup DAPM widgets and paths */
++static const struct snd_soc_dapm_widget audiosense_pi_dapm_widgets[] = {
++	SND_SOC_DAPM_HP("Headphone Jack", NULL),
++	SND_SOC_DAPM_LINE("Line Out", NULL),
++	SND_SOC_DAPM_LINE("Line In", NULL),
++	SND_SOC_DAPM_INPUT("CM_L"),
++	SND_SOC_DAPM_INPUT("CM_R"),
++};
++
++static const struct snd_soc_dapm_route audiosense_pi_audio_map[] = {
++	/* Line Inputs are connected to
++	 * (IN1_L | IN1_R)
++	 * (IN2_L | IN2_R)
++	 * (IN3_L | IN3_R)
++	 */
++	{"IN1_L", NULL, "Line In"},
++	{"IN1_R", NULL, "Line In"},
++	{"IN2_L", NULL, "Line In"},
++	{"IN2_R", NULL, "Line In"},
++	{"IN3_L", NULL, "Line In"},
++	{"IN3_R", NULL, "Line In"},
++
++	/* Mic is connected to IN2_L and IN2_R */
++	{"Left ADC", NULL, "Mic Bias"},
++	{"Right ADC", NULL, "Mic Bias"},
++
++	/* Headphone connected to HPL, HPR */
++	{"Headphone Jack", NULL, "HPL"},
++	{"Headphone Jack", NULL, "HPR"},
++
++	/* Speakers connected to LOL and LOR */
++	{"Line Out", NULL, "LOL"},
++	{"Line Out", NULL, "LOR"},
++};
++
++static int audiosense_pi_card_init(struct snd_soc_pcm_runtime *rtd)
++{
++	/* TODO: init of the codec specific dapm data, ignore suspend/resume */
++	struct snd_soc_component *component = rtd->codec_dai->component;
++
++	snd_soc_component_update_bits(component, AIC32X4_MICBIAS, 0x78,
++				      AIC32X4_MICBIAS_LDOIN |
++				      AIC32X4_MICBIAS_2075V);
++	snd_soc_component_update_bits(component, AIC32X4_PWRCFG, 0x08,
++				      AIC32X4_AVDDWEAKDISABLE);
++	snd_soc_component_update_bits(component, AIC32X4_LDOCTL, 0x01,
++				      AIC32X4_LDOCTLEN);
++
++	return 0;
++}
++
++static int audiosense_pi_card_hw_params(
++		struct snd_pcm_substream *substream,
++		struct snd_pcm_hw_params *params)
++{
++	int ret = 0;
++	struct snd_soc_pcm_runtime *rtd = substream->private_data;
++	struct snd_soc_dai *codec_dai = rtd->codec_dai;
++
++	/* Set the codec system clock, there is a 12 MHz XTAL on the board */
++	ret = snd_soc_dai_set_sysclk(codec_dai, AIC32X4_SYSCLK_XTAL,
++				     12000000, SND_SOC_CLOCK_IN);
++	if (ret) {
++		dev_err(rtd->card->dev,
++			"could not set codec driver clock params\n");
++		return ret;
++	}
++	return 0;
++}
++
++static int audiosense_pi_card_startup(struct snd_pcm_substream *substream)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++
++	/*
++	 * Set codec to 48Khz Sampling, Stereo I/O and 16 bit audio
++	 */
++	runtime->hw.channels_max = 2;
++	snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS,
++				   &audiosense_constraints_ch);
++
++	runtime->hw.formats = SNDRV_PCM_FMTBIT_S16_LE;
++	snd_pcm_hw_constraint_msbits(runtime, 0, 16, 16);
++
++
++	snd_pcm_hw_constraint_list(substream->runtime, 0,
++				   SNDRV_PCM_HW_PARAM_RATE,
++				   &audiosense_constraints_rates);
++	return 0;
++}
++
++static struct snd_soc_ops audiosense_pi_card_ops = {
++	.startup = audiosense_pi_card_startup,
++	.hw_params = audiosense_pi_card_hw_params,
++};
++
++static struct snd_soc_dai_link audiosense_pi_card_dai[] = {
++	{
++		.name           = "TLV320AIC3204 Audio",
++		.stream_name    = "TLV320AIC3204 Hifi Audio",
++		.cpu_dai_name   = "bcm2708-i2s.0",
++		.codec_dai_name = "tlv320aic32x4-hifi",
++		.platform_name  = "bcm2708-i2s.0",
++		.codec_name     = "tlv320aic32x4.1-0018",
++		.dai_fmt        = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
++			SND_SOC_DAIFMT_CBM_CFM,
++		.ops            = &audiosense_pi_card_ops,
++		.init           = audiosense_pi_card_init,
++	},
++};
++
++static struct snd_soc_card audiosense_pi_card = {
++	.name		= "audiosense-pi",
++	.driver_name	= "audiosense-pi",
++	.dai_link	= audiosense_pi_card_dai,
++	.owner		= THIS_MODULE,
++	.num_links	= ARRAY_SIZE(audiosense_pi_card_dai),
++	.dapm_widgets	= audiosense_pi_dapm_widgets,
++	.num_dapm_widgets = ARRAY_SIZE(audiosense_pi_dapm_widgets),
++	.dapm_routes	= audiosense_pi_audio_map,
++	.num_dapm_routes = ARRAY_SIZE(audiosense_pi_audio_map),
++};
++
++static int audiosense_pi_card_probe(struct platform_device *pdev)
++{
++	int ret = 0;
++	struct snd_soc_card *card = &audiosense_pi_card;
++	struct snd_soc_dai_link *dai = &audiosense_pi_card_dai[0];
++	struct device_node *i2s_node = pdev->dev.of_node;
++
++	card->dev = &pdev->dev;
++
++	if (!dai) {
++		dev_err(&pdev->dev, "DAI not found. Missing or Invalid\n");
++		return -EINVAL;
++	}
++
++	i2s_node = of_parse_phandle(pdev->dev.of_node, "i2s-controller", 0);
++	if (!i2s_node) {
++		dev_err(&pdev->dev,
++			"Property 'i2s-controller' missing or invalid\n");
++		return -EINVAL;
++	}
++
++	dai->cpu_dai_name = NULL;
++	dai->cpu_of_node = i2s_node;
++	dai->platform_name = NULL;
++	dai->platform_of_node = i2s_node;
++
++	of_node_put(i2s_node);
++
++	ret = snd_soc_register_card(card);
++	if (ret && ret != -EPROBE_DEFER)
++		dev_err(&pdev->dev,
++			"snd_soc_register_card() failed: %d\n", ret);
++
++	return ret;
++}
++
++static int audiosense_pi_card_remove(struct platform_device *pdev)
++{
++	struct snd_soc_card *card = platform_get_drvdata(pdev);
++
++	return snd_soc_unregister_card(card);
++
++}
++
++static const struct of_device_id audiosense_pi_card_of_match[] = {
++	{ .compatible = "as,audiosense-pi", },
++	{},
++};
++MODULE_DEVICE_TABLE(of, audiosense_pi_card_of_match);
++
++static struct platform_driver audiosense_pi_card_driver = {
++	.driver = {
++		.name = "audiosense-snd-card",
++		.owner = THIS_MODULE,
++		.of_match_table = audiosense_pi_card_of_match,
++	},
++	.probe = audiosense_pi_card_probe,
++	.remove = audiosense_pi_card_remove,
++};
++
++module_platform_driver(audiosense_pi_card_driver);
++
++MODULE_AUTHOR("Bhargav AK <anur.bhargav@gmail.com>");
++MODULE_DESCRIPTION("ASoC Driver for TLV320AIC3204 Audio");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:audiosense-pi");
++