brcm2708: rename target to bcm27xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Despite, since subtargets range from bcm2708 to bcm2711, it seems
appropriate to use bcm27xx instead of bcm2708 (again, as already done
for BOARDNAME).

This also renames the packages brcm2708-userland and brcm2708-gpu-fw.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 135 insertions, 0 deletions

diff --git a/target/linux/bcm27xx/patches-4.19/950-0592-drm-vc4_dsi-Fix-DMA-channel-and-memory-leak-in-vc4-3.patch b/target/linux/bcm27xx/patches-4.19/950-0592-drm-vc4_dsi-Fix-DMA-channel-and-memory-leak-in-vc4-3.patch
new file mode 100644
index 0000000000..63b8e8bdb3
--- /dev/null
+++ b/target/linux/bcm27xx/patches-4.19/950-0592-drm-vc4_dsi-Fix-DMA-channel-and-memory-leak-in-vc4-3.patch
@@ -0,0 +1,135 @@
+From 496b26b154da9a962a5310641d8f4b73200fe590 Mon Sep 17 00:00:00 2001
+From: Chris Miller <chris@mesl2.co.uk>
+Date: Wed, 26 Jun 2019 10:40:30 +0100
+Subject: [PATCH] drm: vc4_dsi: Fix DMA channel and memory leak in vc4
+ (#3012)
+
+Signed-off-by: Chris G Miller <chris@creative-electronics.net>
+---
+ drivers/gpu/drm/vc4/vc4_dsi.c | 35 ++++++++++++++++++++++++-----------
+ 1 file changed, 24 insertions(+), 11 deletions(-)
+
+--- a/drivers/gpu/drm/vc4/vc4_dsi.c
++++ b/drivers/gpu/drm/vc4/vc4_dsi.c
+@@ -1536,9 +1536,11 @@ static int vc4_dsi_bind(struct device *d
+ 	/* DSI1 has a broken AXI slave that doesn't respond to writes
+ 	 * from the ARM.  It does handle writes from the DMA engine,
+ 	 * so set up a channel for talking to it.
++	 * Where possible managed resource providers are used, but the DMA channel
++	 * must - if acquired - be explicitly released prior to taking an error exit path.
+ 	 */
+ 	if (dsi->port == 1) {
+-		dsi->reg_dma_mem = dma_alloc_coherent(dev, 4,
++		dsi->reg_dma_mem = dmam_alloc_coherent(dev, 4,
+ 						      &dsi->reg_dma_paddr,
+ 						      GFP_KERNEL);
+ 		if (!dsi->reg_dma_mem) {
+@@ -1557,6 +1559,8 @@ static int vc4_dsi_bind(struct device *d
+ 			return ret;
+ 		}
+ 
++		/* From here on, any error exits must release the dma channel */
++
+ 		/* Get the physical address of the device's registers.  The
+ 		 * struct resource for the regs gives us the bus address
+ 		 * instead.
+@@ -1583,7 +1587,7 @@ static int vc4_dsi_bind(struct device *d
+ 	if (ret) {
+ 		if (ret != -EPROBE_DEFER)
+ 			dev_err(dev, "Failed to get interrupt: %d\n", ret);
+-		return ret;
++		goto rel_dma_exit;
+ 	}
+ 
+ 	dsi->escape_clock = devm_clk_get(dev, "escape");
+@@ -1591,7 +1595,7 @@ static int vc4_dsi_bind(struct device *d
+ 		ret = PTR_ERR(dsi->escape_clock);
+ 		if (ret != -EPROBE_DEFER)
+ 			dev_err(dev, "Failed to get escape clock: %d\n", ret);
+-		return ret;
++		goto rel_dma_exit;
+ 	}
+ 
+ 	dsi->pll_phy_clock = devm_clk_get(dev, "phy");
+@@ -1599,7 +1603,7 @@ static int vc4_dsi_bind(struct device *d
+ 		ret = PTR_ERR(dsi->pll_phy_clock);
+ 		if (ret != -EPROBE_DEFER)
+ 			dev_err(dev, "Failed to get phy clock: %d\n", ret);
+-		return ret;
++		goto rel_dma_exit;
+ 	}
+ 
+ 	dsi->pixel_clock = devm_clk_get(dev, "pixel");
+@@ -1607,7 +1611,7 @@ static int vc4_dsi_bind(struct device *d
+ 		ret = PTR_ERR(dsi->pixel_clock);
+ 		if (ret != -EPROBE_DEFER)
+ 			dev_err(dev, "Failed to get pixel clock: %d\n", ret);
+-		return ret;
++		goto rel_dma_exit;
+ 	}
+ 
+ 	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
+@@ -1622,26 +1626,28 @@ static int vc4_dsi_bind(struct device *d
+ 		if (ret == -ENODEV)
+ 			return 0;
+ 
+-		return ret;
++		goto rel_dma_exit;
+ 	}
+ 
+ 	if (panel) {
+ 		dsi->bridge = devm_drm_panel_bridge_add(dev, panel,
+ 							DRM_MODE_CONNECTOR_DSI);
+-		if (IS_ERR(dsi->bridge))
+-			return PTR_ERR(dsi->bridge);
++		if (IS_ERR(dsi->bridge)){
++			ret = PTR_ERR(dsi->bridge);
++			goto rel_dma_exit;
++		}
+ 	}
+ 
+ 	/* The esc clock rate is supposed to always be 100Mhz. */
+ 	ret = clk_set_rate(dsi->escape_clock, 100 * 1000000);
+ 	if (ret) {
+ 		dev_err(dev, "Failed to set esc clock: %d\n", ret);
+-		return ret;
++		goto rel_dma_exit;
+ 	}
+ 
+ 	ret = vc4_dsi_init_phy_clocks(dsi);
+ 	if (ret)
+-		return ret;
++		goto rel_dma_exit;
+ 
+ 	if (dsi->port == 1)
+ 		vc4->dsi1 = dsi;
+@@ -1653,7 +1659,7 @@ static int vc4_dsi_bind(struct device *d
+ 	ret = drm_bridge_attach(dsi->encoder, dsi->bridge, NULL);
+ 	if (ret) {
+ 		dev_err(dev, "bridge attach failed: %d\n", ret);
+-		return ret;
++		goto rel_dma_exit;
+ 	}
+ 	/* Disable the atomic helper calls into the bridge.  We
+ 	 * manually call the bridge pre_enable / enable / etc. calls
+@@ -1665,6 +1671,11 @@ static int vc4_dsi_bind(struct device *d
+ 	pm_runtime_enable(dev);
+ 
+ 	return 0;
++
++rel_dma_exit:
++	dma_release_channel(dsi->reg_dma_chan);
++
++	return ret;
+ }
+ 
+ static void vc4_dsi_unbind(struct device *dev, struct device *master,
+@@ -1679,6 +1690,8 @@ static void vc4_dsi_unbind(struct device
+ 
+ 	vc4_dsi_encoder_destroy(dsi->encoder);
+ 
++	dma_release_channel(dsi->reg_dma_chan);
++
+ 	if (dsi->port == 1)
+ 		vc4->dsi1 = NULL;
+ }