brcm2708: rename target to bcm27xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Despite, since subtargets range from bcm2708 to bcm2711, it seems
appropriate to use bcm27xx instead of bcm2708 (again, as already done
for BOARDNAME).

This also renames the packages brcm2708-userland and brcm2708-gpu-fw.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 72 insertions, 0 deletions

diff --git a/target/linux/bcm27xx/patches-4.19/950-0606-i2c-bcm2835-Ensure-clock-exists-when-probing.patch b/target/linux/bcm27xx/patches-4.19/950-0606-i2c-bcm2835-Ensure-clock-exists-when-probing.patch
new file mode 100644
index 0000000000..4a468f0291
--- /dev/null
+++ b/target/linux/bcm27xx/patches-4.19/950-0606-i2c-bcm2835-Ensure-clock-exists-when-probing.patch
@@ -0,0 +1,72 @@
+From 1a5122f1756ef4fc5779324ad26b6a04142166b5 Mon Sep 17 00:00:00 2001
+From: Annaliese McDermond <nh6z@nh6z.net>
+Date: Fri, 21 Jun 2019 03:52:50 -0700
+Subject: [PATCH] i2c: bcm2835: Ensure clock exists when probing
+
+Commit 9de93b04df16b055824e3f1f13fedb90fbcf2e4f upstream.
+
+Probe function fails to recognize that upstream clock actually
+doesn't yet exist because clock driver has not been initialized.
+Actually try to go get the clock and test for its existence
+before trying to set up a downstream clock based upon it.
+
+This fixes a bug that causes the i2c driver not to work with
+monolithic kernels.
+
+Fixes: bebff81fb8b9 ("i2c: bcm2835: Model Divider in CCF")
+Signed-off-by: Annaliese McDermond <nh6z@nh6z.net>
+Acked-by: Stefan Wahren <wahrenst@gmx.net>
+Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
+---
+ drivers/i2c/busses/i2c-bcm2835.c | 16 ++++++++++++----
+ 1 file changed, 12 insertions(+), 4 deletions(-)
+
+--- a/drivers/i2c/busses/i2c-bcm2835.c
++++ b/drivers/i2c/busses/i2c-bcm2835.c
+@@ -244,15 +244,18 @@ static const struct clk_ops clk_bcm2835_
+ };
+ 
+ static struct clk *bcm2835_i2c_register_div(struct device *dev,
+-					const char *mclk_name,
++					struct clk *mclk,
+ 					struct bcm2835_i2c_dev *i2c_dev)
+ {
+ 	struct clk_init_data init;
+ 	struct clk_bcm2835_i2c *priv;
+ 	char name[32];
++	const char *mclk_name;
+ 
+ 	snprintf(name, sizeof(name), "%s_div", dev_name(dev));
+ 
++	mclk_name = __clk_get_name(mclk);
++
+ 	init.ops = &clk_bcm2835_i2c_ops;
+ 	init.name = name;
+ 	init.parent_names = (const char* []) { mclk_name };
+@@ -505,8 +508,8 @@ static int bcm2835_i2c_probe(struct plat
+ 	struct resource *mem, *irq;
+ 	int ret;
+ 	struct i2c_adapter *adap;
+-	const char *mclk_name;
+ 	struct clk *bus_clk;
++	struct clk *mclk;
+ 	u32 bus_clk_rate;
+ 
+ 	i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
+@@ -521,9 +524,14 @@ static int bcm2835_i2c_probe(struct plat
+ 	if (IS_ERR(i2c_dev->regs))
+ 		return PTR_ERR(i2c_dev->regs);
+ 
+-	mclk_name = of_clk_get_parent_name(pdev->dev.of_node, 0);
++	mclk = devm_clk_get(&pdev->dev, NULL);
++	if (IS_ERR(mclk)) {
++		if (PTR_ERR(mclk) != -EPROBE_DEFER)
++			dev_err(&pdev->dev, "Could not get clock\n");
++		return PTR_ERR(mclk);
++	}
+ 
+-	bus_clk = bcm2835_i2c_register_div(&pdev->dev, mclk_name, i2c_dev);
++	bus_clk = bcm2835_i2c_register_div(&pdev->dev, mclk, i2c_dev);
+ 
+ 	if (IS_ERR(bus_clk)) {
+ 		dev_err(&pdev->dev, "Could not register clock\n");