brcm2708: rename target to bcm27xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Despite, since subtargets range from bcm2708 to bcm2711, it seems
appropriate to use bcm27xx instead of bcm2708 (again, as already done
for BOARDNAME).

This also renames the packages brcm2708-userland and brcm2708-gpu-fw.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 1231 insertions, 0 deletions

diff --git a/target/linux/bcm27xx/patches-4.19/950-0738-media-i2c-Add-a-driver-for-the-Infineon-IRS1125-dept.patch b/target/linux/bcm27xx/patches-4.19/950-0738-media-i2c-Add-a-driver-for-the-Infineon-IRS1125-dept.patch
new file mode 100644
index 0000000000..9b882fc8f8
--- /dev/null
+++ b/target/linux/bcm27xx/patches-4.19/950-0738-media-i2c-Add-a-driver-for-the-Infineon-IRS1125-dept.patch
@@ -0,0 +1,1231 @@
+From c09b42cb057ddf8bd20d57c6b0ffd94f3e15ea7c Mon Sep 17 00:00:00 2001
+From: Markus Proeller <markus.proeller@pieye.org>
+Date: Thu, 10 Oct 2019 19:12:36 +0200
+Subject: [PATCH] media: i2c: Add a driver for the Infineon IRS1125
+ depth sensor
+
+The Infineon IRS1125 is a time of flight depth sensor that
+has a CSI-2 interface.
+
+Add a V4L2 subdevice driver for this device.
+
+Signed-off-by: Markus Proeller <markus.proeller@pieye.org>
+---
+ drivers/media/i2c/Kconfig   |   12 +
+ drivers/media/i2c/Makefile  |    1 +
+ drivers/media/i2c/irs1125.c | 1112 +++++++++++++++++++++++++++++++++++
+ drivers/media/i2c/irs1125.h |   61 ++
+ 4 files changed, 1186 insertions(+)
+ create mode 100644 drivers/media/i2c/irs1125.c
+ create mode 100644 drivers/media/i2c/irs1125.h
+
+--- a/drivers/media/i2c/Kconfig
++++ b/drivers/media/i2c/Kconfig
+@@ -813,6 +813,18 @@ config VIDEO_OV13858
+ 	  This is a Video4Linux2 sensor driver for the OmniVision
+ 	  OV13858 camera.
+ 
++config VIDEO_IRS1125
++	tristate "Infineon IRS1125 sensor support"
++	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
++	depends on MEDIA_CAMERA_SUPPORT
++	select V4L2_FWNODE
++	help
++	  This is a Video4Linux2 sensor-level driver for the Infineon
++	  IRS1125 camera.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called irs1125.
++
+ config VIDEO_VS6624
+ 	tristate "ST VS6624 sensor support"
+ 	depends on VIDEO_V4L2 && I2C
+--- a/drivers/media/i2c/Makefile
++++ b/drivers/media/i2c/Makefile
+@@ -80,6 +80,7 @@ obj-$(CONFIG_VIDEO_OV772X) += ov772x.o
+ obj-$(CONFIG_VIDEO_OV7740) += ov7740.o
+ obj-$(CONFIG_VIDEO_OV9650) += ov9650.o
+ obj-$(CONFIG_VIDEO_OV13858) += ov13858.o
++obj-$(CONFIG_VIDEO_IRS1125) += irs1125.o
+ obj-$(CONFIG_VIDEO_MT9M032) += mt9m032.o
+ obj-$(CONFIG_VIDEO_MT9M111) += mt9m111.o
+ obj-$(CONFIG_VIDEO_MT9P031) += mt9p031.o
+--- /dev/null
++++ b/drivers/media/i2c/irs1125.c
+@@ -0,0 +1,1112 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * A V4L2 driver for Infineon IRS1125 TOF cameras.
++ * Copyright (C) 2018, pieye GmbH
++ *
++ * Based on V4L2 OmniVision OV5647 Image Sensor driver
++ * Copyright (C) 2016 Ramiro Oliveira <roliveir@synopsys.com>
++ *
++ * DT / fwnode changes, and GPIO control taken from ov5640.c
++ * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
++ * Copyright (C) 2014-2017 Mentor Graphics Inc.
++ *
++ */
++
++#include "irs1125.h"
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/gpio/consumer.h>
++#include <linux/i2c.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/module.h>
++#include <linux/of_graph.h>
++#include <linux/slab.h>
++#include <linux/videodev2.h>
++#include <linux/firmware.h>
++#include <media/v4l2-device.h>
++#include <media/v4l2-fwnode.h>
++#include <media/v4l2-image-sizes.h>
++#include <media/v4l2-mediabus.h>
++#include <media/v4l2-ctrls.h>
++
++#define CHECK_BIT(val, pos) ((val) & BIT(pos))
++
++#define SENSOR_NAME "irs1125"
++
++#define RESET_ACTIVE_DELAY_MS	 20
++
++#define IRS1125_ALTERNATE_FW "irs1125_af.bin"
++
++#define IRS1125_REG_CSICFG       0xA882
++#define IRS1125_REG_DESIGN_STEP	 0xB0AD
++#define IRS1125_REG_EFUSEVAL2	 0xB09F
++#define IRS1125_REG_EFUSEVAL3	 0xB0A0
++#define IRS1125_REG_EFUSEVAL4	 0xB0A1
++#define IRS1125_REG_DMEM_SHADOW	 0xC320
++
++#define IRS1125_DESIGN_STEP_EXPECTED 0x0a12
++
++#define IRS1125_ROW_START_DEF		0
++#define IRS1125_COLUMN_START_DEF	0
++#define IRS1125_WINDOW_HEIGHT_DEF	 288
++#define IRS1125_WINDOW_WIDTH_DEF	352
++
++struct regval_list {
++	u16 addr;
++	u16 data;
++};
++
++struct irs1125 {
++	struct v4l2_subdev sd;
++	struct media_pad pad;
++	/* the parsed DT endpoint info */
++	struct v4l2_fwnode_endpoint ep;
++
++	struct clk *xclk;
++	struct v4l2_ctrl_handler ctrl_handler;
++
++	/* To serialize asynchronus callbacks */
++	struct mutex lock;
++
++	/* image data layout */
++	unsigned int num_seq;
++
++	/* reset pin */
++	struct gpio_desc *reset;
++
++	/* V4l2 Controls to grab */
++	struct v4l2_ctrl *ctrl_modplls;
++	struct v4l2_ctrl *ctrl_numseq;
++
++	int power_count;
++};
++
++static inline struct irs1125 *to_state(struct v4l2_subdev *sd)
++{
++	return container_of(sd, struct irs1125, sd);
++}
++
++static struct regval_list irs1125_26MHz[] = {
++	{0xB017, 0x0413},
++	{0xB086, 0x3535},
++	{0xB0AE, 0xEF02},
++	{0xA000, 0x0004},
++	{0xFFFF, 100},
++
++	{0xB062, 0x6383},
++	{0xB063, 0x55A8},
++	{0xB068, 0x7628},
++	{0xB069, 0x03E2},
++
++	{0xFFFF, 100},
++	{0xB05A, 0x01C5},
++	{0xB05C, 0x0206},
++	{0xB05D, 0x01C5},
++	{0xB05F, 0x0206},
++	{0xB016, 0x1335},
++	{0xFFFF, 100},
++	{0xA893, 0x8261},
++	{0xA894, 0x89d8},
++	{0xA895, 0x131d},
++	{0xA896, 0x4251},
++	{0xA897, 0x9D8A},
++	{0xA898, 0x0BD8},
++	{0xA899, 0x2245},
++	{0xA89A, 0xAB9B},
++	{0xA89B, 0x03B9},
++	{0xA89C, 0x8041},
++	{0xA89D, 0xE07E},
++	{0xA89E, 0x0307},
++	{0xFFFF, 100},
++	{0xA88D, 0x0004},
++	{0xA800, 0x0E68},
++	{0xA801, 0x0000},
++	{0xA802, 0x000C},
++	{0xA803, 0x0000},
++	{0xA804, 0x0E68},
++	{0xA805, 0x0000},
++	{0xA806, 0x0440},
++	{0xA807, 0x0000},
++	{0xA808, 0x0E68},
++	{0xA809, 0x0000},
++	{0xA80A, 0x0884},
++	{0xA80B, 0x0000},
++	{0xA80C, 0x0E68},
++	{0xA80D, 0x0000},
++	{0xA80E, 0x0CC8},
++	{0xA80F, 0x0000},
++	{0xA810, 0x0E68},
++	{0xA811, 0x0000},
++	{0xA812, 0x2000},
++	{0xA813, 0x0000},
++	{0xA882, 0x0081},
++	{0xA88C, 0x403A},
++	{0xA88F, 0x031E},
++	{0xA892, 0x0351},
++	{0x9813, 0x13FF},
++	{0x981B, 0x7608},
++
++	{0xB008, 0x0000},
++	{0xB015, 0x1513},
++
++	{0xFFFF, 100}
++};
++
++static struct regval_list irs1125_seq_cfg[] = {
++	{0xC3A0, 0x823D},
++	{0xC3A1, 0xB13B},
++	{0xC3A2, 0x0313},
++	{0xC3A3, 0x4659},
++	{0xC3A4, 0xC4EC},
++	{0xC3A5, 0x03CE},
++	{0xC3A6, 0x4259},
++	{0xC3A7, 0xC4EC},
++	{0xC3A8, 0x03CE},
++	{0xC3A9, 0x8839},
++	{0xC3AA, 0x89D8},
++	{0xC3AB, 0x031D},
++
++	{0xC24C, 0x5529},
++	{0xC24D, 0x0000},
++	{0xC24E, 0x1200},
++	{0xC24F, 0x6CB2},
++	{0xC250, 0x0000},
++	{0xC251, 0x5529},
++	{0xC252, 0x42F4},
++	{0xC253, 0xD1AF},
++	{0xC254, 0x8A18},
++	{0xC255, 0x0002},
++	{0xC256, 0x5529},
++	{0xC257, 0x6276},
++	{0xC258, 0x11A7},
++	{0xC259, 0xD907},
++	{0xC25A, 0x0000},
++	{0xC25B, 0x5529},
++	{0xC25C, 0x07E0},
++	{0xC25D, 0x7BFE},
++	{0xC25E, 0x6402},
++	{0xC25F, 0x0019},
++
++	{0xC3AC, 0x0007},
++	{0xC3AD, 0xED88},
++	{0xC320, 0x003E},
++	{0xC321, 0x0000},
++	{0xC322, 0x2000},
++	{0xC323, 0x0000},
++	{0xC324, 0x0271},
++	{0xC325, 0x0000},
++	{0xC326, 0x000C},
++	{0xC327, 0x0000},
++	{0xC328, 0x0271},
++	{0xC329, 0x0000},
++	{0xC32A, 0x0440},
++	{0xC32B, 0x0000},
++	{0xC32C, 0x0271},
++	{0xC32D, 0x0000},
++	{0xC32E, 0x0884},
++	{0xC32F, 0x0000},
++	{0xC330, 0x0271},
++	{0xC331, 0x0000},
++	{0xC332, 0x0CC8},
++	{0xC333, 0x0000},
++	{0xA88D, 0x0004},
++
++	{0xA890, 0x0000},
++	{0xC219, 0x0002},
++	{0xC21A, 0x0000},
++	{0xC21B, 0x0000},
++	{0xC21C, 0x00CD},
++	{0xC21D, 0x0009},
++	{0xC21E, 0x00CD},
++	{0xC21F, 0x0009},
++
++	{0xA87C, 0x0000},
++	{0xC032, 0x0001},
++	{0xC034, 0x0000},
++	{0xC035, 0x0001},
++	{0xC039, 0x0000},
++	{0xC401, 0x0002},
++
++	{0xFFFF, 1},
++	{0xA87C, 0x0001}
++};
++
++static int irs1125_write(struct v4l2_subdev *sd, u16 reg, u16 val)
++{
++	int ret;
++	unsigned char data[4] = { reg >> 8, reg & 0xff, val >> 8, val & 0xff};
++	struct i2c_client *client = v4l2_get_subdevdata(sd);
++
++	ret = i2c_master_send(client, data, 4);
++	if (ret < 0)
++		dev_err(&client->dev, "%s: i2c write error, reg: %x\n",
++			__func__, reg);
++
++	return ret;
++}
++
++static int irs1125_read(struct v4l2_subdev *sd, u16 reg, u16 *val)
++{
++	int ret;
++	unsigned char data_w[2] = { reg >> 8, reg & 0xff };
++	char rdval[2];
++
++	struct i2c_client *client = v4l2_get_subdevdata(sd);
++
++	ret = i2c_master_send(client, data_w, 2);
++	if (ret < 0) {
++		dev_dbg(&client->dev, "%s: i2c write error, reg: %x\n",
++			__func__, reg);
++		return ret;
++	}
++
++	ret = i2c_master_recv(client, rdval, 2);
++	if (ret < 0)
++		dev_err(&client->dev, "%s: i2c read error, reg: %x\n",
++			__func__, reg);
++
++	*val = rdval[1] | (rdval[0] << 8);
++
++	return ret;
++}
++
++static int irs1125_write_array(struct v4l2_subdev *sd,
++			       struct regval_list *regs, int array_size)
++{
++	int i, ret;
++
++	for (i = 0; i < array_size; i++) {
++		if (regs[i].addr == 0xFFFF) {
++			msleep(regs[i].data);
++		} else {
++			ret = irs1125_write(sd, regs[i].addr, regs[i].data);
++			if (ret < 0)
++				return ret;
++		}
++	}
++
++	return 0;
++}
++
++static int irs1125_stream_on(struct v4l2_subdev *sd)
++{
++	int ret;
++	struct irs1125 *irs1125 = to_state(sd);
++	struct i2c_client *client = v4l2_get_subdevdata(sd);
++
++	v4l2_ctrl_grab(irs1125->ctrl_numseq, 1);
++	v4l2_ctrl_grab(irs1125->ctrl_modplls, 1);
++
++	ret = irs1125_write(sd, 0xC400, 0x0001);
++	if (ret < 0) {
++		dev_err(&client->dev, "error enabling firmware: %d", ret);
++		return ret;
++	}
++
++	msleep(100);
++
++	return irs1125_write(sd, 0xA87C, 0x0001);
++}
++
++static int irs1125_stream_off(struct v4l2_subdev *sd)
++{
++	int ret;
++	struct irs1125 *irs1125 = to_state(sd);
++	struct i2c_client *client = v4l2_get_subdevdata(sd);
++
++	v4l2_ctrl_grab(irs1125->ctrl_numseq, 0);
++	v4l2_ctrl_grab(irs1125->ctrl_modplls, 0);
++
++	ret = irs1125_write(sd, 0xA87C, 0x0000);
++	if (ret < 0) {
++		dev_err(&client->dev, "error disabling trigger: %d", ret);
++		return ret;
++	}
++
++	msleep(100);
++
++	return irs1125_write(sd, 0xC400, 0x0002);
++}
++
++static int __sensor_init(struct v4l2_subdev *sd)
++{
++	unsigned int cnt, idx;
++	int ret;
++	u16 val;
++	struct i2c_client *client = v4l2_get_subdevdata(sd);
++	struct irs1125 *irs1125 = to_state(sd);
++	const struct firmware *fw;
++	struct regval_list *reg_data;
++
++	cnt = 0;
++	while (1) {
++		ret = irs1125_read(sd, 0xC40F, &val);
++		if (ret < 0) {
++			dev_err(&client->dev, "read register 0xC40F failed\n");
++			return ret;
++		}
++		if (CHECK_BIT(val, 14) == 0)
++			break;
++
++		if (cnt >= 5) {
++			dev_err(&client->dev, "timeout waiting for 0xC40F\n");
++			return -EAGAIN;
++		}
++
++		cnt++;
++	}
++
++	ret = irs1125_write_array(sd, irs1125_26MHz,
++				  ARRAY_SIZE(irs1125_26MHz));
++	if (ret < 0) {
++		dev_err(&client->dev, "write sensor default regs error\n");
++		return ret;
++	}
++
++	/* set CSI-2 number of data lanes */
++	if (irs1125->ep.bus.mipi_csi2.num_data_lanes == 1) {
++		val = 0x0001;
++	} else if (irs1125->ep.bus.mipi_csi2.num_data_lanes == 2) {
++		val = 0x0081;
++	} else {
++		dev_err(&client->dev, "invalid number of data lanes %d\n",
++			irs1125->ep.bus.mipi_csi2.num_data_lanes);
++		return -EINVAL;
++	}
++
++	ret = irs1125_write(sd, IRS1125_REG_CSICFG, val);
++	if (ret < 0) {
++		dev_err(&client->dev, "write sensor csi2 config error\n");
++		return ret;
++	}
++
++	/* request the firmware, this will block and timeout */
++	ret = request_firmware(&fw, IRS1125_ALTERNATE_FW, &client->dev);
++	if (ret) {
++		dev_err(&client->dev,
++			"did not find the firmware file '%s' (status %d)\n",
++			IRS1125_ALTERNATE_FW, ret);
++		return ret;
++	}
++
++	if (fw->size % 4) {
++		dev_err(&client->dev, "firmware file '%s' invalid\n",
++			IRS1125_ALTERNATE_FW);
++		release_firmware(fw);
++		return -EINVAL;
++	}
++
++	for (idx = 0; idx < fw->size; idx += 4)	{
++		reg_data = (struct regval_list *)&fw->data[idx];
++		ret = irs1125_write(sd, reg_data->addr, reg_data->data);
++		if (ret < 0) {
++			dev_err(&client->dev, "firmware write error\n");
++			release_firmware(fw);
++			return ret;
++		}
++	}
++	release_firmware(fw);
++
++	ret = irs1125_write_array(sd, irs1125_seq_cfg,
++				  ARRAY_SIZE(irs1125_seq_cfg));
++	if (ret < 0) {
++		dev_err(&client->dev, "write default sequence failed\n");
++		return ret;
++	}
++
++	return 0;
++}
++
++static int irs1125_sensor_power(struct v4l2_subdev *sd, int on)
++{
++	int ret = 0;
++	struct irs1125 *irs1125 = to_state(sd);
++	struct i2c_client *client = v4l2_get_subdevdata(sd);
++
++	mutex_lock(&irs1125->lock);
++
++	if (on && !irs1125->power_count) {
++		gpiod_set_value_cansleep(irs1125->reset, 1);
++		msleep(RESET_ACTIVE_DELAY_MS);
++
++		ret = clk_prepare_enable(irs1125->xclk);
++		if (ret < 0) {
++			dev_err(&client->dev, "clk prepare enable failed\n");
++			goto out;
++		}
++
++		ret = __sensor_init(sd);
++		if (ret < 0) {
++			clk_disable_unprepare(irs1125->xclk);
++			dev_err(&client->dev,
++				"Camera not available, check Power\n");
++			goto out;
++		}
++	} else if (!on && irs1125->power_count == 1) {
++		gpiod_set_value_cansleep(irs1125->reset, 0);
++	}
++
++	/* Update the power count. */
++	irs1125->power_count += on ? 1 : -1;
++	WARN_ON(irs1125->power_count < 0);
++
++out:
++	mutex_unlock(&irs1125->lock);
++
++	return ret;
++}
++
++#ifdef CONFIG_VIDEO_ADV_DEBUG
++static int irs1125_sensor_get_register(struct v4l2_subdev *sd,
++				       struct v4l2_dbg_register *reg)
++{
++	u16 val;
++	int ret;
++
++	ret = irs1125_read(sd, reg->reg & 0xffff, &val);
++	if (ret < 0)
++		return ret;
++
++	reg->val = val;
++	reg->size = 1;
++
++	return 0;
++}
++
++static int irs1125_sensor_set_register(struct v4l2_subdev *sd,
++				       const struct v4l2_dbg_register *reg)
++{
++	return irs1125_write(sd, reg->reg & 0xffff, reg->val & 0xffff);
++}
++#endif
++
++static const struct v4l2_subdev_core_ops irs1125_subdev_core_ops = {
++	.s_power = irs1125_sensor_power,
++#ifdef CONFIG_VIDEO_ADV_DEBUG
++	.g_register = irs1125_sensor_get_register,
++	.s_register = irs1125_sensor_set_register,
++#endif
++};
++
++static int irs1125_s_stream(struct v4l2_subdev *sd, int enable)
++{
++	if (enable)
++		return irs1125_stream_on(sd);
++	else
++		return irs1125_stream_off(sd);
++}
++
++static const struct v4l2_subdev_video_ops irs1125_subdev_video_ops = {
++	.s_stream = irs1125_s_stream,
++};
++
++static int irs1125_enum_mbus_code(struct v4l2_subdev *sd,
++				  struct v4l2_subdev_pad_config *cfg,
++	struct v4l2_subdev_mbus_code_enum *code)
++{
++	if (code->index > 0)
++		return -EINVAL;
++
++	code->code = MEDIA_BUS_FMT_Y12_1X12;
++
++	return 0;
++}
++
++static int irs1125_set_get_fmt(struct v4l2_subdev *sd,
++			       struct v4l2_subdev_pad_config *cfg,
++			       struct v4l2_subdev_format *format)
++{
++	struct v4l2_mbus_framefmt *fmt = &format->format;
++	struct irs1125 *irs1125 = to_state(sd);
++
++	if (format->pad != 0)
++		return -EINVAL;
++
++	/* Only one format is supported, so return that */
++	memset(fmt, 0, sizeof(*fmt));
++	fmt->code = MEDIA_BUS_FMT_Y12_1X12;
++	fmt->colorspace = V4L2_COLORSPACE_RAW;
++	fmt->field = V4L2_FIELD_NONE;
++	fmt->width = IRS1125_WINDOW_WIDTH_DEF;
++	fmt->height = IRS1125_WINDOW_HEIGHT_DEF * irs1125->num_seq;
++
++	return 0;
++}
++
++static const struct v4l2_subdev_pad_ops irs1125_subdev_pad_ops = {
++	.enum_mbus_code = irs1125_enum_mbus_code,
++	.set_fmt = irs1125_set_get_fmt,
++	.get_fmt = irs1125_set_get_fmt,
++};
++
++static const struct v4l2_subdev_ops irs1125_subdev_ops = {
++	.core = &irs1125_subdev_core_ops,
++	.video = &irs1125_subdev_video_ops,
++	.pad = &irs1125_subdev_pad_ops,
++};
++
++static int irs1125_s_ctrl(struct v4l2_ctrl *ctrl)
++{
++	struct irs1125 *dev = container_of(ctrl->handler,
++					struct irs1125, ctrl_handler);
++	struct i2c_client *client = v4l2_get_subdevdata(&dev->sd);
++	int err, i;
++	struct irs1125_mod_pll *mod_cur, *mod_new;
++	struct irs1125_seq_cfg *cfg_cur, *cfg_new;
++	u16 addr, val;
++
++	err = 0;
++
++	switch (ctrl->id) {
++	case IRS1125_CID_SAFE_RECONFIG:
++	{
++		struct irs1125_illu *illu_cur, *illu_new;
++
++		illu_new = (struct irs1125_illu *)ctrl->p_new.p;
++		illu_cur = (struct irs1125_illu *)ctrl->p_cur.p;
++		for (i = 0; i < IRS1125_NUM_SEQ_ENTRIES; i++) {
++			if (illu_cur[i].exposure != illu_new[i].exposure) {
++				addr = 0xA850 + i * 2;
++				val = illu_new[i].exposure;
++				err = irs1125_write(&dev->sd, addr, val);
++				if (err < 0)
++					break;
++			}
++			if (illu_cur[i].framerate != illu_new[i].framerate) {
++				addr = 0xA851 + i * 2;
++				val = illu_new[i].framerate;
++				err = irs1125_write(&dev->sd, addr, val);
++				if (err < 0)
++					break;
++			}
++		}
++		break;
++	}
++	case IRS1125_CID_MOD_PLL:
++		mod_new = (struct irs1125_mod_pll *)ctrl->p_new.p;
++		mod_cur = (struct irs1125_mod_pll *)ctrl->p_cur.p;
++		for (i = 0; i < IRS1125_NUM_MOD_PLLS; i++) {
++			if (mod_cur[i].pllcfg1 != mod_new[i].pllcfg1) {
++				addr = 0xC3A0 + i * 3;
++				val = mod_new[i].pllcfg1;
++				err = irs1125_write(&dev->sd, addr, val);
++				if (err < 0)
++					break;
++			}
++			if (mod_cur[i].pllcfg2 != mod_new[i].pllcfg2) {
++				addr = 0xC3A1 + i * 3;
++				val = mod_new[i].pllcfg2;
++				err = irs1125_write(&dev->sd, addr, val);
++				if (err < 0)
++					break;
++			}
++			if (mod_cur[i].pllcfg3 != mod_new[i].pllcfg3) {
++				addr = 0xC3A2 + i * 3;
++				val = mod_new[i].pllcfg3;
++				err = irs1125_write(&dev->sd, addr, val);
++				if (err < 0)
++					break;
++			}
++			if (mod_cur[i].pllcfg4 != mod_new[i].pllcfg4) {
++				addr = 0xC24C + i * 5;
++				val = mod_new[i].pllcfg4;
++				err = irs1125_write(&dev->sd, addr, val);
++				if (err < 0)
++					break;
++			}
++			if (mod_cur[i].pllcfg5 != mod_new[i].pllcfg5) {
++				addr = 0xC24D + i * 5;
++				val = mod_new[i].pllcfg5;
++				err = irs1125_write(&dev->sd, addr, val);
++				if (err < 0)
++					break;
++			}
++			if (mod_cur[i].pllcfg6 != mod_new[i].pllcfg6) {
++				addr = 0xC24E + i * 5;
++				val = mod_new[i].pllcfg6;
++				err = irs1125_write(&dev->sd, addr, val);
++				if (err < 0)
++					break;
++			}
++			if (mod_cur[i].pllcfg7 != mod_new[i].pllcfg7) {
++				addr = 0xC24F + i * 5;
++				val = mod_new[i].pllcfg7;
++				err = irs1125_write(&dev->sd, addr, val);
++				if (err < 0)
++					break;
++			}
++			if (mod_cur[i].pllcfg8 != mod_new[i].pllcfg8) {
++				addr = 0xC250 + i * 5;
++				val = mod_new[i].pllcfg8;
++				err = irs1125_write(&dev->sd, addr, val);
++				if (err < 0)
++					break;
++			}
++		}
++		break;
++	case IRS1125_CID_SEQ_CONFIG:
++		cfg_new = (struct irs1125_seq_cfg *)ctrl->p_new.p;
++		cfg_cur = (struct irs1125_seq_cfg *)ctrl->p_cur.p;
++		for (i = 0; i < IRS1125_NUM_SEQ_ENTRIES; i++) {
++			if (cfg_cur[i].exposure != cfg_new[i].exposure)	{
++				addr = IRS1125_REG_DMEM_SHADOW + i * 4;
++				val = cfg_new[i].exposure;
++				err = irs1125_write(&dev->sd, addr, val);
++				if (err < 0)
++					break;
++			}
++			if (cfg_cur[i].framerate != cfg_new[i].framerate) {
++				addr = IRS1125_REG_DMEM_SHADOW + 1 + i * 4;
++				val = cfg_new[i].framerate;
++				err = irs1125_write(&dev->sd, addr, val);
++				if (err < 0)
++					break;
++			}
++			if (cfg_cur[i].ps != cfg_new[i].ps) {
++				addr = IRS1125_REG_DMEM_SHADOW + 2 + i * 4;
++				val = cfg_new[i].ps;
++				err = irs1125_write(&dev->sd, addr, val);
++				if (err < 0)
++					break;
++			}
++			if (cfg_cur[i].pll != cfg_new[i].pll) {
++				addr = IRS1125_REG_DMEM_SHADOW + 3 + i * 4;
++				val = cfg_new[i].pll;
++				err = irs1125_write(&dev->sd, addr, val);
++				if (err < 0)
++					break;
++			}
++		}
++		break;
++	case IRS1125_CID_NUM_SEQS:
++		err = irs1125_write(&dev->sd, 0xA88D, ctrl->val - 1);
++		if (err >= 0)
++			dev->num_seq = ctrl->val;
++		break;
++	case IRS1125_CID_CONTINUOUS_TRIG:
++		if (ctrl->val == 0)
++			err = irs1125_write(&dev->sd, 0xA87C, 0);
++		else
++			err = irs1125_write(&dev->sd, 0xA87C, 1);
++		break;
++	case IRS1125_CID_TRIGGER:
++		if (ctrl->val != 0) {
++			err = irs1125_write(&dev->sd, 0xA87C, 1);
++			if (err >= 0)
++				err = irs1125_write(&dev->sd, 0xA87C, 0);
++		}
++		break;
++	case IRS1125_CID_RECONFIG:
++		if (ctrl->val != 0)
++			err = irs1125_write(&dev->sd, 0xA87A, 1);
++		break;
++	case IRS1125_CID_ILLU_ON:
++		if (ctrl->val == 0)
++			err = irs1125_write(&dev->sd, 0xA892, 0x377);
++		else
++			err = irs1125_write(&dev->sd, 0xA892, 0x355);
++		break;
++	default:
++		break;
++	}
++
++	if (err < 0)
++		dev_err(&client->dev, "Error executing control ID: %d, val %d, err %d",
++			ctrl->id, ctrl->val, err);
++	else
++		err = 0;
++
++	return err;
++}
++
++static const struct v4l2_ctrl_ops irs1125_ctrl_ops = {
++	.s_ctrl = irs1125_s_ctrl,
++};
++
++static const struct v4l2_ctrl_config irs1125_custom_ctrls[] = {
++	{
++		.ops = &irs1125_ctrl_ops,
++		.id = IRS1125_CID_NUM_SEQS,
++		.name = "Change number of sequences",
++		.type = V4L2_CTRL_TYPE_INTEGER,
++		.flags = V4L2_CTRL_FLAG_MODIFY_LAYOUT,
++		.min = 1,
++		.max = 20,
++		.step = 1,
++		.def = 5,
++	}, {
++		.ops = &irs1125_ctrl_ops,
++		.id = IRS1125_CID_MOD_PLL,
++		.name = "Reconfigure modulation PLLs",
++		.type = V4L2_CTRL_TYPE_U16,
++		.flags = V4L2_CTRL_FLAG_HAS_PAYLOAD,
++		.min = 0,
++		.max = U16_MAX,
++		.step = 1,
++		.def = 0,
++		.elem_size = sizeof(u16),
++		.dims = {sizeof(struct irs1125_mod_pll) / sizeof(u16),
++			IRS1125_NUM_MOD_PLLS}
++	}, {
++		.ops = &irs1125_ctrl_ops,
++		.id = IRS1125_CID_SAFE_RECONFIG,
++		.name = "Change exposure and pause of single seq",
++		.type = V4L2_CTRL_TYPE_U16,
++		.flags = V4L2_CTRL_FLAG_HAS_PAYLOAD,
++		.min = 0,
++		.max = U16_MAX,
++		.step = 1,
++		.def = 0,
++		.elem_size = sizeof(u16),
++		.dims = {sizeof(struct irs1125_illu) / sizeof(u16),
++			IRS1125_NUM_SEQ_ENTRIES}
++	}, {
++		.ops = &irs1125_ctrl_ops,
++		.id = IRS1125_CID_SEQ_CONFIG,
++		.name = "Change sequence settings",
++		.type = V4L2_CTRL_TYPE_U16,
++		.flags = V4L2_CTRL_FLAG_HAS_PAYLOAD,
++		.min = 0,
++		.max = U16_MAX,
++		.step = 1,
++		.def = 0,
++		.elem_size = sizeof(u16),
++		.dims = {sizeof(struct irs1125_seq_cfg) / sizeof(u16),
++			IRS1125_NUM_SEQ_ENTRIES}
++	}, {
++		.ops = &irs1125_ctrl_ops,
++		.id = IRS1125_CID_CONTINUOUS_TRIG,
++		.name = "Enable/disable continuous trigger",
++		.type = V4L2_CTRL_TYPE_BOOLEAN,
++		.flags = V4L2_CTRL_FLAG_EXECUTE_ON_WRITE,
++		.min = 0,
++		.max = 1,
++		.step = 1,
++		.def = 0
++	}, {
++		.ops = &irs1125_ctrl_ops,
++		.id = IRS1125_CID_TRIGGER,
++		.name = "Capture a single sequence",
++		.type = V4L2_CTRL_TYPE_BOOLEAN,
++		.flags = V4L2_CTRL_FLAG_EXECUTE_ON_WRITE,
++		.min = 0,
++		.max = 1,
++		.step = 1,
++		.def = 0
++	}, {
++		.ops = &irs1125_ctrl_ops,
++		.id = IRS1125_CID_RECONFIG,
++		.name = "Trigger imager reconfiguration",
++		.type = V4L2_CTRL_TYPE_BOOLEAN,
++		.flags = V4L2_CTRL_FLAG_EXECUTE_ON_WRITE,
++		.min = 0,
++		.max = 1,
++		.step = 1,
++		.def = 0
++	}, {
++		.ops = &irs1125_ctrl_ops,
++		.id = IRS1125_CID_ILLU_ON,
++		.name = "Turn illu on or off",
++		.type = V4L2_CTRL_TYPE_BOOLEAN,
++		.flags = V4L2_CTRL_FLAG_EXECUTE_ON_WRITE,
++		.min = 0,
++		.max = 1,
++		.step = 1,
++		.def = 1
++	}, {
++		.ops = &irs1125_ctrl_ops,
++		.id = IRS1125_CID_IDENT0,
++		.name = "Get ident 0 information",
++		.type = V4L2_CTRL_TYPE_INTEGER,
++		.flags = V4L2_CTRL_FLAG_READ_ONLY,
++		.min = S32_MIN,
++		.max = S32_MAX,
++		.step = 1,
++		.def = 0
++	}, {
++		.ops = &irs1125_ctrl_ops,
++		.id = IRS1125_CID_IDENT1,
++		.name = "Get ident 1 information",
++		.type = V4L2_CTRL_TYPE_INTEGER,
++		.flags = V4L2_CTRL_FLAG_READ_ONLY,
++		.min = S32_MIN,
++		.max = S32_MAX,
++		.step = 1,
++		.def = 0
++	}, {
++		.ops = &irs1125_ctrl_ops,
++		.id = IRS1125_CID_IDENT2,
++		.name = "Get ident 2 information",
++		.type = V4L2_CTRL_TYPE_INTEGER,
++		.flags = V4L2_CTRL_FLAG_READ_ONLY,
++		.min = S32_MIN,
++		.max = S32_MAX,
++		.step = 1,
++		.def = 0
++	}
++};
++
++static int irs1125_detect(struct v4l2_subdev *sd)
++{
++	u16 read;
++	int ret;
++	struct i2c_client *client = v4l2_get_subdevdata(sd);
++
++	ret = irs1125_read(sd, IRS1125_REG_DESIGN_STEP, &read);
++	if (ret < 0) {
++		dev_err(&client->dev, "error reading from i2c\n");
++		return ret;
++	}
++
++	if (read != IRS1125_DESIGN_STEP_EXPECTED) {
++		dev_err(&client->dev, "Design step expected 0x%x got 0x%x",
++			IRS1125_DESIGN_STEP_EXPECTED, read);
++		return -ENODEV;
++	}
++
++	return 0;
++}
++
++static int irs1125_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
++{
++	struct v4l2_mbus_framefmt *format =
++	v4l2_subdev_get_try_format(sd, fh->pad, 0);
++
++	format->code = MEDIA_BUS_FMT_Y12_1X12;
++	format->width = IRS1125_WINDOW_WIDTH_DEF;
++	format->height = IRS1125_WINDOW_HEIGHT_DEF;
++	format->field = V4L2_FIELD_NONE;
++	format->colorspace = V4L2_COLORSPACE_RAW;
++
++	return 0;
++}
++
++static const struct v4l2_subdev_internal_ops irs1125_subdev_internal_ops = {
++	.open = irs1125_open,
++};
++
++static int irs1125_ctrls_init(struct irs1125 *sensor, struct device *dev)
++{
++	struct v4l2_ctrl *ctrl;
++	int err, i;
++	struct v4l2_ctrl_handler *hdl;
++
++	hdl = &sensor->ctrl_handler;
++	v4l2_ctrl_handler_init(hdl, ARRAY_SIZE(irs1125_custom_ctrls));
++
++	for (i = 0; i < ARRAY_SIZE(irs1125_custom_ctrls); i++)	{
++		ctrl = v4l2_ctrl_new_custom(hdl, &irs1125_custom_ctrls[i],
++					    NULL);
++		if (!ctrl)
++			dev_err(dev, "Failed to init custom control %s\n",
++				irs1125_custom_ctrls[i].name);
++		else if (irs1125_custom_ctrls[i].id == IRS1125_CID_NUM_SEQS)
++			sensor->ctrl_numseq = ctrl;
++		else if (irs1125_custom_ctrls[i].id == IRS1125_CID_MOD_PLL)
++			sensor->ctrl_modplls = ctrl;
++	}
++
++	if (hdl->error)	{
++		dev_err(dev, "Error %d adding controls\n", hdl->error);
++		err = hdl->error;
++		goto error_ctrls;
++	}
++
++	sensor->sd.ctrl_handler = hdl;
++	return 0;
++
++error_ctrls:
++	v4l2_ctrl_handler_free(&sensor->ctrl_handler);
++	return -err;
++}
++
++static int irs1125_ident_setup(struct irs1125 *sensor, struct device *dev)
++{
++	int ret;
++	struct v4l2_ctrl *ctrl;
++	struct v4l2_subdev *sd;
++	u16 read;
++
++	sd = &sensor->sd;
++
++	ctrl = v4l2_ctrl_find(&sensor->ctrl_handler, IRS1125_CID_IDENT0);
++	if (!ctrl) {
++		dev_err(dev, "could not find device ctrl.\n");
++		return -EINVAL;
++	}
++
++	ret = irs1125_read(sd, IRS1125_REG_EFUSEVAL2, &read);
++	if (ret < 0) {
++		dev_err(dev, "error reading from i2c\n");
++		return -EIO;
++	}
++
++	v4l2_ctrl_s_ctrl(ctrl, read);
++
++	ctrl = v4l2_ctrl_find(&sensor->ctrl_handler, IRS1125_CID_IDENT1);
++	if (!ctrl) {
++		dev_err(dev, "could not find device ctrl.\n");
++		return -EINVAL;
++	}
++
++	ret = irs1125_read(sd, IRS1125_REG_EFUSEVAL3, &read);
++	if (ret < 0) {
++		dev_err(dev, "error reading from i2c\n");
++		return -EIO;
++	}
++
++	v4l2_ctrl_s_ctrl(ctrl, read);
++
++	ctrl = v4l2_ctrl_find(&sensor->ctrl_handler, IRS1125_CID_IDENT2);
++	if (!ctrl) {
++		dev_err(dev, "could not find device ctrl.\n");
++		return -EINVAL;
++	}
++
++	ret = irs1125_read(sd, IRS1125_REG_EFUSEVAL4, &read);
++	if (ret < 0) {
++		dev_err(dev, "error reading from i2c\n");
++		return -EIO;
++	}
++	v4l2_ctrl_s_ctrl(ctrl, read & 0xFFFC);
++
++	return 0;
++}
++
++static int irs1125_probe(struct i2c_client *client,
++			 const struct i2c_device_id *id)
++{
++	struct device *dev = &client->dev;
++	struct irs1125 *sensor;
++	int ret;
++	struct fwnode_handle *endpoint;
++	u32 xclk_freq;
++	int gpio_num;
++
++	sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
++	if (!sensor)
++		return -ENOMEM;
++
++	v4l2_i2c_subdev_init(&sensor->sd, client, &irs1125_subdev_ops);
++
++	/* Get CSI2 bus config */
++	endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev),
++						  NULL);
++	if (!endpoint) {
++		dev_err(dev, "endpoint node not found\n");
++		return -EINVAL;
++	}
++
++	ret = v4l2_fwnode_endpoint_parse(endpoint, &sensor->ep);
++	fwnode_handle_put(endpoint);
++	if (ret) {
++		dev_err(dev, "Could not parse endpoint\n");
++		return ret;
++	}
++
++	/* get system clock (xclk) */
++	sensor->xclk = devm_clk_get(dev, NULL);
++	if (IS_ERR(sensor->xclk)) {
++		dev_err(dev, "could not get xclk");
++		return PTR_ERR(sensor->xclk);
++	}
++
++	xclk_freq = clk_get_rate(sensor->xclk);
++	if (xclk_freq != 26000000) {
++		dev_err(dev, "Unsupported clock frequency: %u\n", xclk_freq);
++		return -EINVAL;
++	}
++
++	sensor->num_seq = 5;
++
++	/* Request the power down GPIO */
++	sensor->reset = devm_gpiod_get(&client->dev, "pwdn",
++				       GPIOD_OUT_LOW);
++
++	if (IS_ERR(sensor->reset)) {
++		dev_err(dev, "could not get reset");
++		return PTR_ERR(sensor->reset);
++	}
++
++	gpio_num = desc_to_gpio(sensor->reset);
++
++	mutex_init(&sensor->lock);
++
++	ret = irs1125_ctrls_init(sensor, dev);
++	if (ret < 0)
++		goto mutex_remove;
++
++	sensor->sd.internal_ops = &irs1125_subdev_internal_ops;
++	sensor->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
++	sensor->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
++	sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
++	ret = media_entity_pads_init(&sensor->sd.entity, 1, &sensor->pad);
++	if (ret < 0)
++		goto mutex_remove;
++
++	gpiod_set_value_cansleep(sensor->reset, 1);
++	msleep(RESET_ACTIVE_DELAY_MS);
++
++	ret = irs1125_detect(&sensor->sd);
++	if (ret < 0)
++		goto error;
++
++	ret = irs1125_ident_setup(sensor, dev);
++	if (ret < 0)
++		goto error;
++
++	gpiod_set_value_cansleep(sensor->reset, 0);
++
++	ret = v4l2_async_register_subdev(&sensor->sd);
++	if (ret < 0)
++		goto error;
++
++	dev_dbg(dev, "Infineon IRS1125 camera driver probed\n");
++
++	return 0;
++
++error:
++	media_entity_cleanup(&sensor->sd.entity);
++mutex_remove:
++	mutex_destroy(&sensor->lock);
++	return ret;
++}
++
++static int irs1125_remove(struct i2c_client *client)
++{
++	struct v4l2_subdev *sd = i2c_get_clientdata(client);
++	struct irs1125 *irs1125 = to_state(sd);
++
++	v4l2_async_unregister_subdev(&irs1125->sd);
++	media_entity_cleanup(&irs1125->sd.entity);
++	v4l2_device_unregister_subdev(sd);
++	mutex_destroy(&irs1125->lock);
++	v4l2_ctrl_handler_free(&irs1125->ctrl_handler);
++
++	return 0;
++}
++
++#if IS_ENABLED(CONFIG_OF)
++static const struct of_device_id irs1125_of_match[] = {
++	{ .compatible = "infineon,irs1125" },
++	{ /* sentinel */ },
++};
++MODULE_DEVICE_TABLE(of, irs1125_of_match);
++#endif
++
++static struct i2c_driver irs1125_driver = {
++	.driver = {
++		.of_match_table = of_match_ptr(irs1125_of_match),
++		.name	 = SENSOR_NAME,
++	},
++	.probe		= irs1125_probe,
++	.remove		= irs1125_remove,
++};
++
++module_i2c_driver(irs1125_driver);
++
++MODULE_AUTHOR("Markus Proeller <markus.proeller@pieye.org>");
++MODULE_DESCRIPTION("Infineon irs1125 sensor driver");
++MODULE_LICENSE("GPL v2");
++
+--- /dev/null
++++ b/drivers/media/i2c/irs1125.h
+@@ -0,0 +1,61 @@
++/* SPDX-License-Identifier: GPL-2.0 */
++/*
++ * A V4L2 driver for Infineon IRS1125 TOF cameras.
++ * Copyright (C) 2018, pieye GmbH
++ *
++ * Based on V4L2 OmniVision OV5647 Image Sensor driver
++ * Copyright (C) 2016 Ramiro Oliveira <roliveir@synopsys.com>
++ *
++ * DT / fwnode changes, and GPIO control taken from ov5640.c
++ * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
++ * Copyright (C) 2014-2017 Mentor Graphics Inc.
++ *
++ */
++
++#ifndef IRS1125_H
++#define IRS1125_H
++
++#include <linux/v4l2-controls.h>
++#include <linux/types.h>
++
++#define IRS1125_NUM_SEQ_ENTRIES 20
++#define IRS1125_NUM_MOD_PLLS 4
++
++#define IRS1125_CID_CUSTOM_BASE        (V4L2_CID_USER_BASE | 0xf000)
++#define IRS1125_CID_SAFE_RECONFIG      (IRS1125_CID_CUSTOM_BASE + 0)
++#define IRS1125_CID_CONTINUOUS_TRIG    (IRS1125_CID_CUSTOM_BASE + 1)
++#define IRS1125_CID_TRIGGER            (IRS1125_CID_CUSTOM_BASE + 2)
++#define IRS1125_CID_RECONFIG           (IRS1125_CID_CUSTOM_BASE + 3)
++#define IRS1125_CID_ILLU_ON            (IRS1125_CID_CUSTOM_BASE + 4)
++#define IRS1125_CID_NUM_SEQS           (IRS1125_CID_CUSTOM_BASE + 5)
++#define IRS1125_CID_MOD_PLL            (IRS1125_CID_CUSTOM_BASE + 6)
++#define IRS1125_CID_SEQ_CONFIG         (IRS1125_CID_CUSTOM_BASE + 7)
++#define IRS1125_CID_IDENT0             (IRS1125_CID_CUSTOM_BASE + 8)
++#define IRS1125_CID_IDENT1             (IRS1125_CID_CUSTOM_BASE + 9)
++#define IRS1125_CID_IDENT2             (IRS1125_CID_CUSTOM_BASE + 10)
++
++struct irs1125_seq_cfg {
++	__u16 exposure;
++	__u16 framerate;
++	__u16 ps;
++	__u16 pll;
++};
++
++struct irs1125_illu {
++	__u16 exposure;
++	__u16 framerate;
++};
++
++struct irs1125_mod_pll {
++	__u16 pllcfg1;
++	__u16 pllcfg2;
++	__u16 pllcfg3;
++	__u16 pllcfg4;
++	__u16 pllcfg5;
++	__u16 pllcfg6;
++	__u16 pllcfg7;
++	__u16 pllcfg8;
++};
++
++#endif /* IRS1125 */
++