bcm27xx: add linux 5.4 support

Tested on bcm2710 (Raspberry Pi 3B).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 44 insertions, 0 deletions

diff --git a/target/linux/bcm27xx/patches-5.4/950-0132-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch b/target/linux/bcm27xx/patches-5.4/950-0132-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch
new file mode 100644
index 0000000000..da43a76bf2
--- /dev/null
+++ b/target/linux/bcm27xx/patches-5.4/950-0132-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch
@@ -0,0 +1,44 @@
+From 20c9da8c7bab3bbc18e42ee0b2659c4b43aabad7 Mon Sep 17 00:00:00 2001
+From: Joshua Emele <jemele@acm.org>
+Date: Wed, 7 Nov 2018 16:07:40 -0800
+Subject: [PATCH] lan78xx: Debounce link events to minimize poll storm
+
+The bInterval is set to 4 (i.e. 8 microframes => 1ms) and the only bit
+that the driver pays attention to is "link was reset". If there's a
+flapping status bit in that endpoint data, (such as if PHY negotiation
+needs a few tries to get a stable link) then polling at a slower rate
+would act as a de-bounce.
+
+See: https://github.com/raspberrypi/linux/issues/2447
+---
+ drivers/net/usb/lan78xx.c | 12 +++++++++++-
+ 1 file changed, 11 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/usb/lan78xx.c
++++ b/drivers/net/usb/lan78xx.c
+@@ -438,6 +438,11 @@ static bool enable_tso;
+ module_param(enable_tso, bool, 0644);
+ MODULE_PARM_DESC(enable_tso, "Enables TCP segmentation offload");
+ 
++#define INT_URB_MICROFRAMES_PER_MS	8
++static int int_urb_interval_ms = 8;
++module_param(int_urb_interval_ms, int, 0);
++MODULE_PARM_DESC(int_urb_interval_ms, "Override usb interrupt urb interval");
++
+ static int lan78xx_read_reg(struct lan78xx_net *dev, u32 index, u32 *data)
+ {
+ 	u32 *buf = kmalloc(sizeof(u32), GFP_KERNEL);
+@@ -3819,7 +3824,12 @@ static int lan78xx_probe(struct usb_inte
+ 	dev->pipe_intr = usb_rcvintpipe(dev->udev,
+ 					dev->ep_intr->desc.bEndpointAddress &
+ 					USB_ENDPOINT_NUMBER_MASK);
+-	period = dev->ep_intr->desc.bInterval;
++	if (int_urb_interval_ms <= 0)
++		period = dev->ep_intr->desc.bInterval;
++	else
++		period = int_urb_interval_ms * INT_URB_MICROFRAMES_PER_MS;
++
++	netif_notice(dev, probe, netdev, "int urb period %d\n", period);
+ 
+ 	maxp = usb_maxpacket(dev->udev, dev->pipe_intr, 0);
+ 	buf = kmalloc(maxp, GFP_KERNEL);