bcm27xx: import latest patches from the RPi foundation

bcm2708: boot tested on RPi B+ v1.2
bcm2709: boot tested on RPi 3B v1.2 and RPi 4B v1.1 4G
bcm2710: boot tested on RPi 3B v1.2
bcm2711: boot tested on RPi 4B v1.1 4G

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 60 insertions, 0 deletions

diff --git a/target/linux/bcm27xx/patches-5.4/950-0293-xhci-Use-more-event-ring-segment-table-entries.patch b/target/linux/bcm27xx/patches-5.4/950-0293-xhci-Use-more-event-ring-segment-table-entries.patch
new file mode 100644
index 0000000000..4b4766f739
--- /dev/null
+++ b/target/linux/bcm27xx/patches-5.4/950-0293-xhci-Use-more-event-ring-segment-table-entries.patch
@@ -0,0 +1,60 @@
+From 90c56c8f52c912aa6e990e63d953b6dbccea7250 Mon Sep 17 00:00:00 2001
+From: Jonathan Bell <jonathan@raspberrypi.org>
+Date: Tue, 13 Aug 2019 15:53:29 +0100
+Subject: [PATCH] xhci: Use more event ring segment table entries
+
+Users have reported log spam created by "Event Ring Full" xHC event
+TRBs. These are caused by interrupt latency in conjunction with a very
+busy set of devices on the bus. The errors are benign, but throughput
+will suffer as the xHC will pause processing of transfers until the
+event ring is drained by the kernel. Expand the number of event TRB slots
+available by increasing the number of event ring segments in the ERST.
+
+Controllers have a hardware-defined limit as to the number of ERST
+entries they can process, so make the actual number in use
+min(ERST_MAX_SEGS, hw_max).
+
+Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
+---
+ drivers/usb/host/xhci-mem.c | 8 +++++---
+ drivers/usb/host/xhci.h     | 4 ++--
+ 2 files changed, 7 insertions(+), 5 deletions(-)
+
+--- a/drivers/usb/host/xhci-mem.c
++++ b/drivers/usb/host/xhci-mem.c
+@@ -2503,9 +2503,11 @@ int xhci_mem_init(struct xhci_hcd *xhci,
+ 	 * Event ring setup: Allocate a normal ring, but also setup
+ 	 * the event ring segment table (ERST).  Section 4.9.3.
+ 	 */
++	val2 = 1 << HCS_ERST_MAX(xhci->hcs_params2);
++	val2 = min_t(unsigned int, ERST_MAX_SEGS, val2);
+ 	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Allocating event ring");
+-	xhci->event_ring = xhci_ring_alloc(xhci, ERST_NUM_SEGS, 1, TYPE_EVENT,
+-					0, flags);
++	xhci->event_ring = xhci_ring_alloc(xhci, val2, 1, TYPE_EVENT,
++					   0, flags);
+ 	if (!xhci->event_ring)
+ 		goto fail;
+ 	if (xhci_check_trb_in_td_math(xhci) < 0)
+@@ -2518,7 +2520,7 @@ int xhci_mem_init(struct xhci_hcd *xhci,
+ 	/* set ERST count with the number of entries in the segment table */
+ 	val = readl(&xhci->ir_set->erst_size);
+ 	val &= ERST_SIZE_MASK;
+-	val |= ERST_NUM_SEGS;
++	val |= val2;
+ 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ 			"// Write ERST size = %i to ir_set 0 (some bits preserved)",
+ 			val);
+--- a/drivers/usb/host/xhci.h
++++ b/drivers/usb/host/xhci.h
+@@ -1649,8 +1649,8 @@ struct urb_priv {
+  * Each segment table entry is 4*32bits long.  1K seems like an ok size:
+  * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
+  * meaning 64 ring segments.
+- * Initial allocated size of the ERST, in number of entries */
+-#define	ERST_NUM_SEGS	1
++ * Maximum number of segments in the ERST */
++#define	ERST_MAX_SEGS	8
+ /* Initial allocated size of the ERST, in number of entries */
+ #define	ERST_SIZE	64
+ /* Initial number of event segment rings allocated */