diff options
| author | Nick Hainke <vincent@systemli.org> | 2020-10-25 14:51:55 +0100 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-11-18 21:13:46 +0100 |
| commit | 79f3f1358bf993a5d7ae14eba9cea2686b40841d (patch) | |
| tree | 7e1a9ee0b3823789317a5b6143457db1d7030060 /target/linux/bcm27xx/patches-5.4 | |
| parent | a8030ea40fdba9edbba240a621c0dc3558a36e07 (diff) | |
| download | upstream-79f3f1358bf993a5d7ae14eba9cea2686b40841d.tar.gz upstream-79f3f1358bf993a5d7ae14eba9cea2686b40841d.tar.bz2 upstream-79f3f1358bf993a5d7ae14eba9cea2686b40841d.zip | |
ath79: Add support for Ubiquiti NanoBeam AC Gen2
CPU: Atheros AR9342 rev 3 SoC
RAM: 64 MB DDR2
Flash: 16 MB NOR SPI
WLAN 2.4GHz: Atheros AR9342 v3 (ath9k)
WLAN 5.0GHz: QCA988X
Ports: 2x GbE
Flashing procedure is identical to other ubnt devices.
https://openwrt.org/toh/ubiquiti/common
Flashing through factory firmware
1. Ensure firmware version v8.7.0 is installed.
Up/downgrade to this exact version.
2. Patch fwupdate.real binary using
`hexdump -Cv /bin/ubntbox | sed 's/14 40 fe 27/00 00 00 00/g' | \
hexdump -R > /tmp/fwupdate.real`
3. Make the patched fwupdate.real binary executable using
`chmod +x /tmp/fwupdate.real`
4. Copy the squashfs factory image to /tmp on the device
5. Flash OpenWrt using `/tmp/fwupdate.real -m <squashfs-factory image>`
6. Wait for the device to reboot
(copied from Ubiquiti NanoBeam AC and modified)
To keep it consistent, we will add the gen1 variant to
the nanobeam ac gen1.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Diffstat (limited to 'target/linux/bcm27xx/patches-5.4')
0 files changed, 0 insertions, 0 deletions