aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm47xx/base-files
diff options
context:
space:
mode:
authorEdward Matijevic <motolav@gmail.com>2020-06-23 14:50:04 -0500
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-06-24 00:17:49 +0200
commit6da319412753ac99a895f09b9735c7f44fd0bf2c (patch)
tree18760bfe9203b95017604fcb1fd067dc3a887a0e /target/linux/bcm47xx/base-files
parent46a6586c83e029446ea35b02a328e5f7935d4a9f (diff)
downloadupstream-6da319412753ac99a895f09b9735c7f44fd0bf2c.tar.gz
upstream-6da319412753ac99a895f09b9735c7f44fd0bf2c.tar.bz2
upstream-6da319412753ac99a895f09b9735c7f44fd0bf2c.zip
bcm47xx: add support for NETGEAR R6200 V1
This patch adds supports for the NETGEAR R6200 V1 This device is mainlined in Linux as of 5.4 Specification: - SOC: Broadcom BCM4718A1 (480 MHz) - Flash: 16MB (Macronix MX25L128) - RAM: 128MB DDR2 - SWITCH: BCM53125 - Ethernet: 5x GE (1 WAN + 4 LAN, Inverted order) - WLAN 2.4G: In SOC - WLAN 5GHz: miniPCIe card, BCM4352 (ID: 4360) - USB: 1x USB 2.0 port (Type A) - Buttons: Reset, WLAN, WPS - LED: Amber for Power, others need a workaround - UART: 1x UART on PCB LED Issues: They are controlled by a 74HC164 via bit banging(GPIO 6/7) Firmware Install Instructions ============================= Using the device specific .chk, use that file to perform a normal device upgrade in the OEM admin page. Signed-off-by: Edward Matijevic <motolav@gmail.com>
Diffstat (limited to 'target/linux/bcm47xx/base-files')
-rwxr-xr-xtarget/linux/bcm47xx/base-files/etc/board.d/01_network5
-rw-r--r--target/linux/bcm47xx/base-files/lib/upgrade/platform.sh1
2 files changed, 6 insertions, 0 deletions
diff --git a/target/linux/bcm47xx/base-files/etc/board.d/01_network b/target/linux/bcm47xx/base-files/etc/board.d/01_network
index e6311d8139..41a2077ea1 100755
--- a/target/linux/bcm47xx/base-files/etc/board.d/01_network
+++ b/target/linux/bcm47xx/base-files/etc/board.d/01_network
@@ -177,6 +177,11 @@ configure_by_model() {
"0:wan" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "8@eth0"
;;
+ "Netgear R6200 V1")
+ ucidef_add_switch "switch0" \
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "8@eth0"
+ ;;
+
"Netgear WN2500RP V1")
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth0"
diff --git a/target/linux/bcm47xx/base-files/lib/upgrade/platform.sh b/target/linux/bcm47xx/base-files/lib/upgrade/platform.sh
index 45815d9fe2..b7e7e45662 100644
--- a/target/linux/bcm47xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/bcm47xx/base-files/lib/upgrade/platform.sh
@@ -18,6 +18,7 @@ platform_expected_image() {
local model="$(cat /tmp/sysinfo/model)"
case "$model" in
+ "Netgear R6200 V1") echo "chk U12H192T00_NETGEAR"; return;;
"Netgear WGR614 V8") echo "chk U12H072T00_NETGEAR"; return;;
"Netgear WGR614 V9") echo "chk U12H094T00_NETGEAR"; return;;
"Netgear WGR614 V10") echo "chk U12H139T01_NETGEAR"; return;;