diff options
author | INAGAKI Hiroshi <musashino.open@gmail.com> | 2020-05-16 17:39:26 +0900 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-06-21 20:56:42 +0200 |
commit | 3a8d65010d999275a583c42064b60ab9a3cdce84 (patch) | |
tree | e1e0c60b4f3f99639b1d9e358c470d092366c218 /target/linux/bcm47xx/config-5.4 | |
parent | 39f2f9b1bf719ff11a4497cbfa6de4e3380e35bc (diff) | |
download | upstream-3a8d65010d999275a583c42064b60ab9a3cdce84.tar.gz upstream-3a8d65010d999275a583c42064b60ab9a3cdce84.tar.bz2 upstream-3a8d65010d999275a583c42064b60ab9a3cdce84.zip |
ramips: add support for ELECOM WRC-2533GST2
ELECOM WRC-2533GST2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based
on MT7621A.
Specification:
- SoC : MediaTek MT7621A
- RAM : DDR3 256 MiB
- Flash : SPI-NOR 32 MiB
- WLAN : 2.4/5 GHz 4T4R (2x MediaTek MT7615)
- Ethernet : 10/100/1000 Mbps x5
- Switch : MediaTek MT7530 (SoC)
- LED/keys : 4x/6x (2x buttons, 1x slide-switch)
- UART : through-hole on PCB
- J4: 3.3V, GND, TX, RX from ethernet port side
- 57600n8
- Power : 12VDC, 1.5A
Flash instruction using factory image:
1. Boot WRC-2533GST2 normally
2. Access to "http://192.168.2.1/" and open firmware update page
("ファームウェア更新")
3. Select the OpenWrt factory image and click apply ("適用") button
4. Wait ~150 seconds to complete flashing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/bcm47xx/config-5.4')
0 files changed, 0 insertions, 0 deletions